FORUMS
Remove All Ads from XDA

[Recovery] TWRP 3.2.2.0 for redmi 6 pro ( sakura )

1,103 posts
Thanks Meter: 447
 
By nofx161, Senior Member on 17th September 2018, 09:15 AM
Post Reply Email Thread


IM NOT THE CREATOR OF THIS TWRP, FOUND IT SPMEWHERE AND WANTED TO SHARE IT


installation:
1. Setup ADB/Fastboot

2. Download the twrp from here : download

3. Power off your device.

4. Hold volume down + power button to boot into the bootloader.

5. Connect your device to your PC with a USB cable.

6. Open the command prompt on your PC.

7. Type cmmand : fastboot flash recovery "filename of recovery.img"

done

If u have anti rollback enabled :

first method:
fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work

2nd method:
fastboot flash antirbpass "recovery.img"

changelog:

What's new in 3.2.2-0:

* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations

for further questions and discussion join telegram group here
The Following User Says Thank You to nofx161 For This Useful Post: [ View ] Gift nofx161 Ad-Free
22nd September 2018, 03:52 AM |#2  
Member
Thanks Meter: 1
 
More
Quote:
Originally Posted by nofx161



IM NOT THE CREATOR OF THIS TWRP, FOUND IT SPMEWHERE AND WANTED TO SHARE IT


installation:
1. Setup ADB/Fastboot

2. Download the twrp from here : download

3. Power off your device.

4. Hold volume down + power button to boot into the bootloader.

5. Connect your device to your PC with a USB cable.

6. Open the command prompt on your PC.

7. Type cmmand : fastboot flash recovery "filename of recovery.img"

done

changelog:

What's new in 3.2.2-0:

* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations

for further questions and discussion join telegram group here

C : \ adb> fastboot flash recovery sakura . img
sending 'recovery' (47604 KB)...
OKAY [ 1.562s]
writing 'recovery'...
FAILED (remote: rollback version downgrade)
finished. total time: 1.578s
22nd September 2018, 12:53 PM |#3  
nofx161's Avatar
OP Senior Member
somewhere far far away
Thanks Meter: 447
 
More
Quote:
Originally Posted by evl01

C : \ adb> fastboot flash recovery sakura . img
sending 'recovery' (47604 KB)...
OKAY [ 1.562s]
writing 'recovery'...
FAILED (remote: rollback version downgrade)
finished. total time: 1.578s

fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work

u can aso try : fastboot flash antirbpass "recovery.img"
23rd September 2018, 10:53 PM |#4  
Member
Thanks Meter: 1
 
More
Quote:
Originally Posted by nofx161

fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work

u can aso try : fastboot flash antirbpass "recovery.img"

Now is asking for a password to decrypt. What should I put there?

---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------

Quote:
Originally Posted by evl01

Now is asking for a password to decrypt. What should I put there?

When I put cancel, I can enter to recovery but I can't use any storage. It's 0mb
24th September 2018, 10:09 AM |#5  
coolek33's Avatar
Senior Member
Flag Zadupie
Thanks Meter: 1,771
 
More
If you factory reset through twrp and reboot recovery it should be OK. But keep in mind to do a backup of your stuff first.
25th September 2018, 10:04 PM |#6  
Junior Member
Thanks Meter: 2
 
More
Hello,

TWRP is released under GPLv3+. It means that if you submit a build of TWRP, you need to distribute its source code and instructions to build it.
Where did you find this build if you "found it somewhere and wanted to share it"? You are basically violating the license by just "sharing" it.

Read the pinned post for more information (applies to GPLv2 like GPLv3).
The Following User Says Thank You to Exagone313 For This Useful Post: [ View ] Gift Exagone313 Ad-Free
5th October 2018, 10:54 AM |#7  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by nofx161

fastboot boot "recovery.img"
in that booted twrp recovery flash twrp .img again and it will work

u can aso try : fastboot flash antirbpass "recovery.img"

Thanks for the information, I lost connection with terminal after booting into TWRP, and didn't know what to do next as TWRP was o MB .

And terminal showed "FInished" with no error in your second command, but twrp was still not installed after holding down power + volumn down. :/

Is there anything i did wrong? Please reply Mr.Sakura
6th October 2018, 01:46 PM |#8  
Senior Member
Thanks Meter: 15
 
More
How to check if anti rollback is enabled?
7th October 2018, 07:29 AM |#10  
Senior Member
Thanks Meter: 15
 
More
It just says anti: and no number. What does this means?
7th October 2018, 11:14 AM |#11  
coolek33's Avatar
Senior Member
Flag Zadupie
Thanks Meter: 1,771
 
More
Mine shows the same so I think there is no anti rollback on our 2 devices.
The Following User Says Thank You to coolek33 For This Useful Post: [ View ] Gift coolek33 Ad-Free
Post Reply Subscribe to Thread

Tags
redmi 6 pro, sakura, twrp

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes