FORUMS

[guide] steps to unbrick Redmi note 7 (lavender)

11 posts
Thanks Meter: 12
 
By angelline2005, Junior Member on 18th April 2019, 03:05 PM
Post Reply Email Thread
Hi guys,
I) My phone status before hardbricked:
- Bootloader unlocked
- twrp installed
II) Cause to hardbricked:
- I flashed the global rom "lavender_global_images_V10.2.7.0.PFGMIXM_20190408 .0000.00_9.0_global_082cfb72fb", then flash the china rom "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"
III) Way to unbrick:
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom: my phone is china variant so I use this rom: "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"

1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Remove back cover, remove battery. While connecting 2 Test-Point, plug in USB cable into PC
My phone back cover: see attachment
Test Point: see attachment
5. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
Everything unknown: contact me on telegram lavender group: https://t.me/LavenderOfficial
Source: https://forum.xda-developers.com/red...-qfil-t3841780
Attached Thumbnails
Click image for larger version

Name:	uck_phone.jpg
Views:	7930
Size:	199.7 KB
ID:	4745016   Click image for larger version

Name:	redmi-note-7-edl-2.jpg
Views:	7928
Size:	30.1 KB
ID:	4745017  
The Following 12 Users Say Thank You to angelline2005 For This Useful Post: [ View ] Gift angelline2005 Ad-Free
4th May 2019, 05:48 AM |#2  
Junior Member
Thanks Meter: 0
 
More
Prog Emmc Firehose MBN(Patched) Credits: Chocoml work for Note 5 only
Quote:
Originally Posted by angelline2005

Hi guys,
I) My phone status before hardbricked:
- Bootloader unlocked
- twrp installed
II) Cause to hardbricked:
- I flashed the global rom "lavender_global_images_V10.2.7.0.PFGMIXM_20190408 .0000.00_9.0_global_082cfb72fb", then flash the china rom "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"
III) Way to unbrick:
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom: my phone is china variant so I use this rom: "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"

1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Remove back cover, remove battery. While connecting 2 Test-Point, plug in USB cable into PC
My phone back cover: see attachment
Test Point: see attachment
5. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
Everything unknown: contact me on telegram lavender group: https://t.me/LavenderOfficial
Source: https://forum.xda-developers.com/red...-qfil-t3841780

22nd May 2019, 02:08 AM |#3  
AstroBiswas's Avatar
Senior Member
Flag Mumbai
Thanks Meter: 396
 
More
Quote:
Originally Posted by angelline2005

Hi guys,
I) My phone status before hardbricked:
- Bootloader unlocked
- twrp installed
II) Cause to hardbricked:
- I flashed the global rom "lavender_global_images_V10.2.7.0.PFGMIXM_20190408 .0000.00_9.0_global_082cfb72fb", then flash the china rom "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"
III) Way to unbrick:
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom: my phone is china variant so I use this rom: "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"

1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Remove back cover, remove battery. While connecting 2 Test-Point, plug in USB cable into PC
My phone back cover: see attachment
Test Point: see attachment
5. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
Everything unknown: contact me on telegram lavender group: https://t.me/LavenderOfficial
Source: https://forum.xda-developers.com/red...-qfil-t3841780

Instead of opening the phone short circuiting the usb cable may work too more info on this thread (bottom op)
https://forum.xda-developers.com/len...brick-t3713126
22nd May 2019, 03:40 AM |#4  
Senior Member
Thanks Meter: 25
 
More
what do u mean hardbricked? it doesnt turn on anymore? or u cant go to fastboot or recovery mode?. and why would it hardbricked if you were just flashing global to china rom?, u forgot to wipe before flashing?.. sorry for lot of questions, im a bit paranoid since im about to flash mine.
27th May 2019, 11:17 AM |#5  
Member
Thanks Meter: 0
 
More
My redmi note 7 stuck on redmi-recovery 3.0 after I flash global rom to my chinese redmi note 7.
I can open the fastboot, I tried to flash chinese rom,but it said 'error cannot flash in lock state.'

then I think to edl mode, I have deep flash cable (DFC). I tried in fastboot mode but I cant open the 9008 port. any idea?
29th May 2019, 01:27 PM |#6  
Junior Member
Thanks Meter: 2
 
More
Hi!

This method helped me recover my Redmi Note 7 from bootloop. Thank you very much!!!

My situation was the following:
I flashed Global Rom onto phone Chinese version and accidentally locked the bootloader. After that, only opening the back cover and short-circuiting Test-Point contacts with battery unplugged helped get the COM 9008 port in Windows. Next QFIL flashed Chinese ROM into eMMC without problem, and the phone could boot into UI again!

I followed the steps precisely and confirm it works.

Also, while opening the back cover I realised that my phone had been opened by seller before me! The Test-Points contacts had distinctive dents from tweezers! I bought the phone from AliExpress from 'Xiaomi Retail Store' seller as a brand new one, but it turned out to be the contrary :|

Wish you successful restoring of your phones , mates!
The Following 2 Users Say Thank You to tolerance1 For This Useful Post: [ View ] Gift tolerance1 Ad-Free
4th June 2019, 06:02 PM |#7  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by tolerance1

Hi!

This method helped me recover my Redmi Note 7 from bootloop. Thank you very much!!!

My situation was the following:
I flashed Global Rom onto phone Chinese version and accidentally locked the bootloader. After that, only opening the back cover and short-circuiting Test-Point contacts with battery unplugged helped get the COM 9008 port in Windows. Next QFIL flashed Chinese ROM into eMMC without problem, and the phone could boot into UI again!

I followed the steps precisely and confirm it works.

Also, while opening the back cover I realised that my phone had been opened by seller before me! The Test-Points contacts had distinctive dents from tweezers! I bought the phone from AliExpress from 'Xiaomi Retail Store' seller as a brand new one, but it turned out to be the contrary :|

Wish you successful restoring of your phones , mates!

i did exactly the same but it didn't work for me
my situation : after trying to flash the global version i got stuck on bootloop with a locked bootloader

---------- Post added at 05:02 PM ---------- Previous post was at 04:24 PM ----------

Quote:
Originally Posted by angelline2005

Hi guys,
I) My phone status before hardbricked:
- Bootloader unlocked
- twrp installed
II) Cause to hardbricked:
- I flashed the global rom "lavender_global_images_V10.2.7.0.PFGMIXM_20190408 .0000.00_9.0_global_082cfb72fb", then flash the china rom "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"
III) Way to unbrick:
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom: my phone is china variant so I use this rom: "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"

1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Remove back cover, remove battery. While connecting 2 Test-Point, plug in USB cable into PC
My phone back cover: see attachment
Test Point: see attachment
5. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
Everything unknown: contact me on telegram lavender group: https://t.me/LavenderOfficial
Source: https://forum.xda-developers.com/red...-qfil-t3841780

where can i find this ARB4 fastboot rom
15th June 2019, 11:15 AM |#8  
Junior Member
Madrid
Thanks Meter: 0
 
More
Quote:
Originally Posted by angelline2005

Hi guys,
I) My phone status before hardbricked:
- Bootloader unlocked
- twrp installed
II) Cause to hardbricked:
- I flashed the global rom "lavender_global_images_V10.2.7.0.PFGMIXM_20190408 .0000.00_9.0_global_082cfb72fb", then flash the china rom "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"
III) Way to unbrick:
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom: my phone is china variant so I use this rom: "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"

1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Remove back cover, remove battery. While connecting 2 Test-Point, plug in USB cable into PC
My phone back cover: see attachment
Test Point: see attachment
5. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
Everything unknown: contact me on telegram lavender group: https://t.me/LavenderOfficial
Source: https://forum.xda-developers.com/red...-qfil-t3841780

My redmi note 7 is the chinese version with global rom and bootloader locked, I bricked it a few days after buying it and I never associated my account.
I followed the steps on this post but I'm getting some errors, any advice ?

this is the log:
https://pastebin.com/jwnSjrfc
20th June 2019, 05:58 PM |#9  
Junior Member
Thanks Meter: 0
 
More
I need somme help plz
I flow all ur step and flash say success but the phone can't boot up
6th July 2019, 07:05 PM |#10  
Junior Member
Thanks Meter: 0
 
More
no rn 7 work again , my phone is dead after flowing ur step plz help
Quote:
Originally Posted by angelline2005

Hi guys,
I) My phone status before hardbricked:
- Bootloader unlocked
- twrp installed
II) Cause to hardbricked:
- I flashed the global rom "lavender_global_images_V10.2.7.0.PFGMIXM_20190408 .0000.00_9.0_global_082cfb72fb", then flash the china rom "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"
III) Way to unbrick:
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom: my phone is china variant so I use this rom: "lavender_images_V10.3.1.0.PFGCNXM_20190403.0000.0 0_9.0_cn_a2cbd6207b"

1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Remove back cover, remove battery. While connecting 2 Test-Point, plug in USB cable into PC
My phone back cover: see attachment
Test Point: see attachment
5. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
Everything unknown: contact me on telegram lavender group: https://t.me/LavenderOfficial
Source: https://forum.xda-developers.com/red...-qfil-t3841780


now my rn 7 not work again , my phone is dead after flowing ur step plz help
11th July 2019, 04:14 PM |#11  
Junior Member
Thanks Meter: 0
 
More
How unbrick redmi note 7 pro. Now in loop mode
Hi I need help to unbrick my phone. Please help!!! I need a last guide in details! I try many time with fast boot mode and adb. But i wrong something ...
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes