Search results

  1. gokhanmoral

    Post Siyah Kernel Discussion Thread (IRC)

    I confirm that wifi tethering doesn't work on CM10.1 I will try to fix that in the next version.
  2. gokhanmoral

    Post [KERNEL][28NOV] SiyahKernel-XT Alpha 0.2

    I have been using a windows phone for a while (don't ask why, it's complicated) and that is why I could not release anything for xperia t for a long time. The last thing I did on xperia-t was that I modified it to support wireless charging (qi.. I opened it up to replace the ear jack because it...
  3. gokhanmoral

    Post Siyah Kernel Discussion Thread (IRC)

    I have updated the blog post and noted that CM10 support is dropped. CM10 uses a different mali driver and I don't want to add a third mali driver into the kernel. 2 mali drivers are already messy enough.
  4. gokhanmoral

    Post Siyah Kernel Discussion Thread (IRC)

    It is not configurable yet. Although we still have the config action script in ramfs I did not put it in the config XML and it is enabled for everyone, using the swappiness of 100 as in the 4.2 leaked kernel but I increased the zram size to 500MB. Lets see if zram cause any instability. I will...
  5. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    the kernel has swap support but no zram support. I disabled it in 1.6.8 because of some reports about instability. I was not sure if the instability was related with zram or not though. I am planning to enable it again in one of the versions and let you guys see if it causes any problems.
  6. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    v1.9.0 is out. nothing fancy. just new mali drivers, new base and some tweaks here and there (hardcoded readahead tweak is one of them. I didn't make it configurable as increasing it too much was causing some problems in the past. I set it to 256 for internal 512 for external) although there...
  7. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    abyssplug is just a bulls hit. it is the same as hotplug, only renamed. and I don't want anybody to advertise any other kernel with the name "Siyah". you can build a new kernel completely based on this one but naming it "Siyah" creates a lot of confusion. not only that, I am strongly against...
  8. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    as soon as I fix the problems with my VM (I moved to another linux distribution) I will compile a recovery to support dualbooting and only then I will test the kernel with cm10.1 I may have to update cm10.1 init files or use a different modem driver to fix that but I cannot say for sure without...
  9. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    actually the voltages are less than samsung stock when you leave them as default. I was using 66MHz as the first step on beta4 and I raised it to 108MHz, but left the voltage at 900mV. most of the phones have [email protected] as samsung's default and some of them may not handle [email protected] I will...
  10. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    you have no idea what you are talking about. and I am writing this post not to educate you but to prevent people believe in the bulls hit you are talking about. every kernel, including the stock, has bugs. and stock kernel had some serious bugs in the past (and nobody wants to test if it still...
  11. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    it is a little unfair to expect people doing something for free and fun to do it very well documented and perfect. I never claimed that my work was perfect. indeed, it is not. and I can live with that. also a lot of people can live with that and like it. even samsung doesn't do it properly...
  12. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    none of the last_kmsg files had a kernel panic so far. and yours has almost nothing in it. I recommend you to reset stweaks settings (using stweaks app) and restart. you can also try to increase the voltages for GPU as well, just a little and only for lowest 2 steps, and use the phone without...
  13. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    you should extract the config by uncompressing /proc/config.gz from a running kernel. I do not push config dumps frequently but CONFIG_IKCONFIG is enabled. you can also extract it with extract-ikconfig utility in scripts folder.
  14. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    no, it is only for Samsung JB and CM10.1. ICS support is removed in the latest beta.
  15. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    I recommend you all to reset stweaks settings because frequency indices changed. that apply/discard probably shows up because of the smooth scaling setting which uses an old index and that index is not present in the latest kernel. the default value of that setting was 8 while we have only 6...
  16. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    RE: [KERNEL][REF][Q&A] Siyah 5.0+/6.0b5+ [ICS][JB/CM10.1] +DISCUSSION+. NON-DEV Threa Dorimanx kernel modifies the rom to change that mapping and that causes problems with other kernels. You have to revert that change before flashing another kernel or flash the rom again. Siyahkernel handles...
  17. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    you should read. especially the last part of the blog post :) use tar.
  18. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    Re: [KERNEL][REF][Q&A] Siyah 5.0+/6.0b5+ [ICS][JB/CM10] +DISCUSSION+. NON-DEV Thread! Yes, I will use s3 method and I will create system and preload images in sdcard which means you will need 1GB more in your internal sd. Any other way would be both very hard to implement and very tricky to...
  19. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    v6.0b5 is up. changelog is @ http://www.gokhanmoral.com/ some information in the first post may be outdated | old. I will update it later. enjoy.
  20. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    hi guys. I was away for some time and I didn't read most of the messages lately including the ones in my s3 and xperia threads as well as the discussion threads. I have just skipped to the end. as you have read in the announcement post of v6.0b5 I know have an s2 (thanks to mbwatson. the device...
  21. gokhanmoral

    Post [LT30p][PATCH] For JB-Alpha (FW: 9.1.A.0.420) {No Longer Needed as Final FW is OUT!}

    I am sorry but you will have to wait some more because I bricked a friend's xperia and gave mine to him. it seems like a soft-brick but I could not recover it no matter what I have tried. I wanted to test the patch on it and installed JB alpha, but it didn't boot.. I could not get past to that...
  22. gokhanmoral

    Post [LT30p][PATCH] For JB-Alpha (FW: 9.1.A.0.420) {No Longer Needed as Final FW is OUT!}

    first of all, great work DooMLoRD... thank you very much. I could finally move to JB after weeks of dreaming about having enough time to flash it :) and I have also downloaded sony's alpha sources (thanks to sony again for being so developer friendly by the way) I got wifi working. according...
  23. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    v1.8.9 is up. bt should work fine on cm10.1 now. and you can directly install cm10.1 as 2ndROM. there are some more tiny changes. see the changelog at www.gokhanmoral.com
  24. gokhanmoral

    Post Siyah Kernel Discussion Thread (IRC)

    I will try to find the reason why you cannot directly flash cm10.1 as second rom. it's good to hear that swap method worked.
  25. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    strange because I had cm10.1 as 1st and samsung jb as 2nd. swapped, cm10.1 didn't boot. fixed the typo and it boots now. maybe you guys should try to clone 1stROM to 2nd, install CM10.1 as 1st and swap 1st&2ndROMs. by the way I'm using CM10.1 nightly which I downloaded yesterday (20130113) and...
  26. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    exactly. there is no single code change between 1.8.7 and 1.8.8 the only change is this: https://github.com/gokhanmoral/ramfs-sgs3/commit/94d943a3cc00a8cb92df703d0805e0dddf6b375e
  27. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    v1.8.8 is up. the only change is that I fixed cm10.1 boot problem when it is installed as 2ndROM. sorry, it was my mistake in a directory name. EDIT: but be careful. your sdcard content may be moved into a subfolder in your internal sdcard (sdcard/0). you may want to create a subfolder in your...
  28. gokhanmoral

    Post Siyah Kernel Discussion Thread (IRC)

    I will test cm10.1 as secondary rom tonight. Maybe I need to prevent it moving files to "0" subfolder in sdcard because that may be the reason for some people being stuck on the boot logo.
  29. gokhanmoral

    Post Siyah Kernel Discussion Thread (IRC)

    yes, if you hijack recovery again the recovery will be running a kernel which is based on update7 sources. I did not update cwm-based recovery to the latest version though. it will be updated in v1.9
  30. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    ok v1.8.7 is up. it's not a big update. just rebased the kernel on i9300 update7 sources. exynos-mem and sudden death issues are supposed to be fixed. I have tested the kernel on cm10.1 (latest nightly) and samsung JB (as secondary) roms. there are tiny changes in ramfs to move .secondrom...
  31. gokhanmoral

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I agree. without the fix it is very dangerous. stay away... run... but also keep in mind that it is not more dangerous than before because that bug was always here since the beginning. I could only read 9-10 pages back and it seems that the only major issue is SDS. and it "seems" that samsung...
  32. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    ok, v6.0b4 is up. wifi driver is updated. and exfat modules are loaded but I could not test if exfat drives work or not. if you have a spare sdcard please format it on a windows machine to exfat and test if it works. and headphone amplification is fixed. (thanks to lyndonguti and THE RED BLUR...
  33. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    last log was very helpful. I will release beta4 very soon (waiting for a feedback if exfat works or not). I think it will fix those reboots that some of you have.
  34. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    a friend of mine was having some random reboots. then he installed the rom again (wiping everything) and installed siyahkernel using odin (without flashing anything else) now he doesn't have those reboots. so, your problem may be application related or some previously installed...
  35. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    lower gpu freq consume less power. but maybe 66 is so low. I may increase the lowest freq to 108 in the next version and only people who find 66 comfortable can lower it.
  36. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    siyahkernel's default is row. samsung kernel's default is cfq.
  37. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    for those who lose cpu governor after restart: can you please check if the same happens with i/o scheduler? and can you check if you have any scripts in /system/bin/customboot.sh, /system/xbin/customboot.sh, /data/local/customboot.sh or /system/etc/init.d that sets the governor to ondemand...
  38. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    Try changing gpu frequencies using stweaks. Samsung defaults are 160, 267 while siyahkernel has 5 steps starting from 66 to save battery. Sent from my LT30p using Tapatalk 2
  39. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    some do some don't. But I do.. :) Marry Christmas to all Sent from my LT30p using Tapatalk 2
  40. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    Can you guys try to change cpu governor with STweaks, restart and see if it is applied on boot (use setcpu or voltage control apps to check after restart) Sent from my LT30p using Tapatalk 2
  41. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    beta3 is up. it will fix video recording (and probably audio related wakelocks). v6.0b2 had a problem with startup script execution. I have written a small note to the blog post about it. please test if beta3 fixes it or not because I didn't have a chance to test it.
  42. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    oops.. my bad can you test with these commands: "/res/uci.sh generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor" "/res/uci.sh generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor pegasusq"
  43. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    may I ask you to test the following: 1) restart after applying pegasusq in stweaks 2) test if you have ondemand 3) if so, run this: "/res/uci.sh scaling_governor". you should be getting "pegasusq" 4) run: "/res/uci.sh scaling_governor pegasusq" and see if you still have ondemand 5) if still...
  44. gokhanmoral

    Post [KERNEL][19FEB] SiyahKernel v6.0b5

    closing the thread once again... I don't want to piss the mods again because this thread attracts too many people. most of them misinterpret the "this is a development thread" statement and use the thread for their self-development purposes. There are very few people who give useful feedback...
  45. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    does everything else work? cam? video recording? wifi? bln?
  46. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    Flash tar using mobile odin if cwm version fails. It probably fails because your CWM recovery doesn't have the props that the kernel flashing script checks to prevent bricking phones having different partition layout (that happened to the ones flashing kernels which were meant for international...
  47. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    Did you flash the one on d-h.st or are you still on the one that you downloaded from Dropbox? Because you may have an older version as I fixed exynos mem issue just before uploading to devhost. But still I cannot say for sure that it works. However the same method prevented chainfire's app to...
  48. gokhanmoral

    Post [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

    As long as you are on Samsung jb leak, yes, it boots. Sent from my LT30p using Tapatalk 2