Search results

  1. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Ok, so the download link is below and for the instruction is very simple : I power on the head unit and when I got Android started ( confirmed by the Bluetooth show up in my smartphone), plug in the flash drive with the conig file (make sure you put the file inside the folder OEM as it is when...
  2. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Hello friend, I will start by the good news which is that my head unit is fully working now 🤩🥳🥳🥳, many thanks to you for your support from the day 0, just want to mention that the screen resolution problem is fixed by passing a small .config file I recieved from the coreboard seller (klyde), I...
  3. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Hello Friend , I did recieved a new coreboard from Klyde today , plugged in and start the unit but the screen keep black while Android is started because I can see my unit blutooth in my smartphone , so what you do you think this problem camefrom ? I did mention to Klyde that my unit is 720P...
  4. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Thanks a lot man, I will try to contact them to get a new coreboard if the price will be ok, and be sure I will returne back to you when I get something.
  5. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Honestly, I can't do that my self so I will try to find someone have the material and the capacity to do so, but in the same time I would like to get the seller information in Aliexpress so I can see if I can bay the coreboard or not, then I want to know if the coreboard replacement will surely...
  6. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Basically I checked the PC and it still see MASKROM without shorting the resistor, and even without give power the the unit, just connect the usb and maskrom appear, this confused me. And the usb flash led dont respond at all. Looks like something is damaged with the short circuit wich was made...
  7. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Thanks for your efforts from my side, I am still trying to recover my unit and you help me a lot sir, now I passed the flash with the right oem file but i still get a black screen? Can I pass another android version like 9 or some other idea plz? Thanks in advance.
  8. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Hi friend, Returned to the first error message in RKDevtool ( Prepare IDB fail), I did download the right Oem file for 720p screen, and I am using the usb cable used to flash the 1st time, but still have this message even if the MASKROM mode appears in the bottom in the flash tool in PC.
  9. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Hello sir, actually you were right and I got worst then your case, i didn't found any isolation there, so I did like you and the blinking buttons stopped but I think I wasn't lucky because after assembly I got a black screen without anything showed, except when I connect the usb to the pc i got...
  10. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    All my thanks and best wishes for you sir.
  11. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    1- Afurmarive , from the right side. 2- Yes my car is tucson 2017, and this unit have this problem of buttons blinking from the daya 0. - attached you find the pictures you requested. Thanks in advance for your efforts..
  12. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    1- the picture is attached of the shorting point I use. 2- My unit buttons right are continuously blinking, and the reason is that my unit sometimes stuck in recovery mode and wont start so i decided to flash it with the recovery and everything because the simple flash with update.zip file dont...
  13. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    First of all thanks for your rapid answer, - I am using the resistor shorting since my android is not working properly. - the USB cable is good ( already work with before). - The MASKROM mode is activated as it appears in the RKDevTool. My question is how I can be sure that maskrom is activated...
  14. M

    Post Klyde PX4 | PX5 | PX6 head units with MCU CSN2 | CSN2_D | CSN2_8600_D (Android 8/9/10

    Hello team, and many thanks for your efforts, I am flashing my px6 CSN2_D head unit with android 10 and got an error in the beginning ( see attached pic), any advise please? Thanks in advance.
  15. M

    Thread (Help plz) PX6 android 10 stuck in recovery mode

    Hello Team , Just bought a new head unit '' Sadocom PX6 android 10 but when mounted I got a problem with a panel buttons so I reset the unit from the rest button then it entered to the recovery mode but I can't exit it after I finished the reset , I downloaded deferent firmware and MCU but...
  16. M

    Thread Sadocom PX6 android 10 stuck at recovery mode

    Hello Team , Just bought a new head unit '' Sadocom PX6 android 10'' but when mounted I got a problem with a panel buttons so I reset the unit from the rest button then it entered to the recovery mode but I can't exit it after I finished the reset , See attached pictures for details . Also I...