Search results

  1. quixcraiova

    Post 8227L_demo

    For your GPS you can use gps amplifier. (this is for increasing gps antenna signal) i've ordered one of this and still wait it to arrive. BGN 17.71 5%OFF | Full Set Auto Car GPS Signal Antenna Amplifier Booster Enhance Device With GPS Receiver + Transmiter 30DB For Phone Navigator...
  2. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    User xyauto password 123456
  3. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    Keep calm. Even i did not made backup. From there began my journey in this forum 😂 . Everytime i use format + download with checked preloader, but not alltime preloader works. Try to download firmware for 9216bj from xy site and the factory preloader from there...
  4. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    @Moynia, disassembly the device and try flashing it with test points. You can see picture on mark's post here in this page. @lagakappa96, dont give up. Im giving you the original factory rom from my device recieved after i spoke with seller. Format USB to fat32, decompres archive , copy to...
  5. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    I solved the gps issue. I saw video about gps amplificator and i saw how they put gps antena on the table, after this they put on it andoid device. I followed that logic and did aproximate the same. I glued the antena near the device with 5cm distance between them. Now all works. I think there...
  6. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    @lagakappa96 I bet everything is because of the preloader. Try the preloader from the rom i gave link or from xy site where username is xyauto and password is 123456. You need to flash using format+download, he must be checked in flashtool. https://easyupload.io/ws80sq...
  7. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    You can try with if not works 66668888
  8. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    @andi_n, try password 8888 for factory menu.
  9. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    I think the same two Mark.
  10. quixcraiova

    Thread YT9216B 2/32 Gps in view but not in use problem.

    Hello, i have YT9216B 2gb ram, 32 rom flashed with rom token from 4pda forum. Everything works, but only gps not works as it should be. In settings menu when i start gps it starts, sometimes not finds satelites, but when finds them, it finds 8 to 11 satelites, but still not recieving data and...
  11. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    @xcoldfire you need to disassembly your device and use wire to make contact (short circuit) between two points (those in the middle) in your main board when you try to flash it again , after this it will be readable again. Its explained here.
  12. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    @Belamia i think these two near Mediatek arm in right side of it
  13. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    @lagakappa96, are you flashing with format + download option in flashtool?
  14. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    @Tamyimt9 i think you need to short these two in the circle.
  15. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    If you want to pair them the kebidu password shoud be as your device bt password. Example for obd2 elm27 password is 1234, if i dont set my unit password to be 1234 it will never pair.
  16. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    This is another device as i see and its different from ours, can you make us photo to main board in the upper and bottom side?
  17. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    What kind(type) of bluetooth remote?
  18. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    @lolloxda ,try to use 4 pin USB and again try with the wire method with two test points. When i was in your situation my 6 pin USB did not the job. Im giving you link for rom im using atm on 2/32 i hope it will help you. https://easyupload.io/ws80sq
  19. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    Same thing, satelites not in use. Is it possible to be because of the rom?
  20. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    I did not recieved any requests but there you go new link : https://easyupload.io/ws80sq will be avaliable there only 30 days. Now im searching info why gps sometimes dont wanna work, it shows me curent location if i gave the unit Internet. It locates satelites but not uses anyone... Whyyy?
  21. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    I did it finally . My problem with touchscreen was with black cable . It was plugged not as required and because of that i had issue with touchscreen . Its not logicable thing because other two cables connects otherway. Im attaching pictures . So i`ve flashed my device YT9216B again with help of...
  22. quixcraiova

    Post [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit

    Someone with backup file for yt9216b 2gb ram 32 rom?
  23. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    I tryed to install roms from xy site and as i expected scatter file gave me error... Someone with advice for this issue?
  24. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    @motinka as i said im in the same situation , but at this moment i use this rom and only with mouse i can use the unit . Im flashing it with the same method as you do . Try it and use the same bin from xy site link i gave in my previous post . Link for the rom i use ATM--->...
  25. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    @lagakappa96 i have the same unit yt9216b 2/32 and at this moment im looking for the same. Unfortunately im now with firmware for 9250 and my touch screen and sensor keys dont work. Only with plugged mouse i can use the device. Tomorrow i will try with one of these and with the original...
  26. quixcraiova

    Post YT9213AJ Latest Firmware XYAUTO 6.5 API 27/Android 8.1 2020 + TWRP Magisk and Dolby

    Mark , Im trying with your preloader but still gives me error with DRAM . Im still trying and still the same .... I"ve tryed with preloader_8227l_demo.bin and worked . Now im assembling and i will go to test the unit in car .
  27. quixcraiova

    Post YT9213AJ Latest Firmware XYAUTO 6.5 API 27/Android 8.1 2020 + TWRP Magisk and Dolby

    Yeah, i know that but not worked. After few hours when i go back home will flash again using wire method with format + download option in flash_tool with your preloader and will write feedback. I hope all will be ok.
  28. quixcraiova

    Post YT9213AJ Latest Firmware XYAUTO 6.5 API 27/Android 8.1 2020 + TWRP Magisk and Dolby

    Thank you , i downloaded your preloader upload from post in 3th page . Now im downloading the rom . Later after few hours of work i will try to flash it . I hope all will be ok . Will come with feedback what happened !
  29. quixcraiova

    Post YT9213AJ Latest Firmware XYAUTO 6.5 API 27/Android 8.1 2020 + TWRP Magisk and Dolby

    Hey Mark, thank you for reply, there is a problem when i use a USB mouse, when i move it nothing happends. Somehow i think the rom dont recognize it. I dont have buttons on my steering wheel to use. Im searching now for 8260 rom, but i cant find it. If you can help me with link i will be...
  30. quixcraiova

    Post YT9213AJ Latest Firmware XYAUTO 6.5 API 27/Android 8.1 2020 + TWRP Magisk and Dolby

    Hello , i have question for owners of 8227L ANDROID YT9216B 2gb ram, 32 rom. I think i bricked my device, it became with blank black screen and only sensor buttons lighted up. It became unreadable for pc. I saw how to make it again visible with dissasembling the unit and using little wire. After...
  31. quixcraiova

    Post ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    Hey there, i've installed the rom and my touch keys didnt work . I saw hot to fix them and all was ok untill i changed the rom with another rom . After this i bricked the device and was necessary to open it and to make concact between two dots on mainboard. I flashed with another rom and device...