Search results

  1. Philux

    Post [KERNEL] [December 3] ElementalX-N6P 6.11

    Are there any plans to implement WireGuard (VPN) support into the ElementalX kernel? https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635 https://www.google.com/amp/s/www.xda-developers.com/wireguard-vpn-project-support-android-roms/amp/
  2. Philux

    Post [ROM][NIGHTLIES]LineageOS[Android 7.1.1]Trader418 LineageOS

    I've seen this behavior before after flashing different kernels. Have you rebooted your phone yet?
  3. Philux

    Post [ROM][NIGHTLIES]LineageOS[Android 7.1.1]Trader418 LineageOS

    I can confirm having the same issue as mentioned above. Attached is a logcat of my cellular radio flapping. I also went into Testing Phone Info (*#*#4636#*#*) and set radio to LTE/CDMA, but it didn't make a difference. You can actually see the radio toggling on and off in the Testing Phone Info...
  4. Philux

    Post ♦ [HLTE/TMO/SPR][ROM][CM13][6.0.1_r30] Temasek's UNOFFICIAL Build v9.3 ♦

    Is your brightness control working on idle kernel? I'm on 12.2 and decided to take your advice and give idle a spin. So far everything else appears to be working, other than my screen is bright, and moving the brightness slider doesn't appear to do anything. Edit: Nevermind, I spoke too soon...
  5. Philux

    Post [ROM][NIGHTLIES]LineageOS[Android 7.1.1]Trader418 LineageOS

    Do you have Traders cm14 installed and running on your Sprint Note 3 right now? I figured I could get it to install, but CDMA wouldn't work without the proper overlays.
  6. Philux

    Post Purify CM13 for Hlte / T-Mo / Can -- v5.0 -- Android 6.0.1_r72 - Unofficial CM13

    Nice! I've been meaning to tear my phone down to check for that very problem. Like you, no software tweaks have been able to fix GPS.
  7. Philux

    Post Magisk General Support / Discussion

    What?!!! I think Chainfire has been more then fair in his position. He could have been a real d**k if he really wanted to be. I think topjohnwu may have over reacted a little in his apology statement. I can sympathize with topjohnwu for his reaction, because I know he has worked hard on Magisk...
  8. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    I removed the su binary from the image before flashing. I haven't tried, but you may be able to remove the binary using TWRP File Manager. /system/xbin/su ---------- Post added at 10:49 PM ---------- Previous post was at 10:34 PM ---------- Chainfire's new suhide mod looks pretty interesting...
  9. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    As an AirWatch admin I can confirm that you are correct. When a device enrolls into AirWatch, the Agent reaches out to AirWatch owned servers and relays the collected system information. This is the same procedure for all companies regardless of the profiles that are set. There are no options in...
  10. Philux

    Post ♦ [HLTE/TMO/SPR][ROM][CM13][6.0.1_r30] Temasek's UNOFFICIAL Build v9.3 ♦

    I for one appreciate root being left out. This gives me the option for which root option I want to use, and how I want to modify my device (system/systemless). With SU binaries left out, I can use corporate MDMs & Android Pay if I choose to do so. So please don't change a thing, and continue to...
  11. Philux

    Post Purify CM13 for Hlte / T-Mo / Can -- v5.0 -- Android 6.0.1_r72 - Unofficial CM13

    Are there any plans for a hltespr version? Is there a big difference between hlte & hltespr other than wireless settings? Back in the CM11 days us poor Sprint users used to be able to flash hlte versions and get them working on our phones. Is that still possible, or have things dramatically...
  12. Philux

    Post Mokee 6.0.1 & Netflix!

    How did you get data to work? When I performed a clean install, I was not able to get any type of signal.
  13. Philux

    Post ♦ [HLTE/TMO/SPR][ROM][CM13][6.0.1_r30] Temasek's UNOFFICIAL Build v9.3 ♦

    Does anyone know what would happen if I flashed the hlte version on the Sprint N900P variant? I know there is already an hltespr version for this device, I am trying to figure out what the difference is. Around the time when cm12 was released we could use the hlte version. There was some sort of...
  14. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    Does anyone know what the real difference between hlte & hltespr roms? I know hlte used to work on our devices, but then there was some change where development was split. Will hlte cm based roms still work on the N900P?
  15. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    Thank you for all your hard work and contributions! We are definitely going to miss you keeping us up and running on the bleeding edge. It might be time for me to start looking for a new device. ;)
  16. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    Nope... My startup ran just fine. Only issue I have had so far is with the APNs again. No LTE. I had to insert a customized apns-conf.xml to get LTE working again. I'm on Ting, and the APN was missing a setting. (default,supl,mms) vs. (supl,mms).
  17. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    Interesting find! I wonder what the app is actually "refreshing" on the back-end. Is this the app you are talking about? https://play.google.com/store/apps/details?id=com.samsung.refreshDevice&hl=en
  18. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    You could most likely use an apns-conf.xml from another CM based rom such as Slim. I know the stock apns-conf.xml's will not work on CM roms. The best method for replacing the apns-conf.xml is to open the rom.zip using 7zip and dragging in the replacement apns-conf.xml to overwrite the old...
  19. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    That is exactly what I did. I was just stating the apns-conf.xml changes because that was probably the issue tusker559 was having. If he also went into the APN settings and reset them to default, it wipes all the APN's in apns-conf.xml and imports whatever APN's are stored on the sim, then...
  20. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    In the last build a bunch of lines changed in the apns-conf.xml. I also had issues with LTE. The APNs that were there, were simply taken back out for some reason. I wish I could figure out which sections the commits for apns-conf.xml happen in. I searched, but couldn't find it. It doesn't make...
  21. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    I did have this issue on the last build or two. I had USB Fast Charge enabled in Kernel Auditor. When I turned USB Fast Charge back off, the issue went away.
  22. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    I have not had any issues with mobile data on the 6.1.16 build.
  23. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    Running smooth! No issues on my end.
  24. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    Oh well... Thank you for trying at least. I will just continue to keep editing my downloads. Great job as always! I appreciate all your hard work, time, and effort! Edit: Just for grins I went back and double checked the apns-conf.xml, and someone added one of the APN's. It was never present...
  25. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    If the MD5 matches your download, uncheck zip verification in recovery when flashing. I'm using TWRP recovery version 3.0.2 ---------- Post added at 01:08 AM ---------- Previous post was at 01:03 AM ---------- I'm not having any issues like that. Everything looks normal on my device...
  26. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    So far so good! I only ran into one little hick-up so far. During initial boot the system hung on the Starting Android screen directly after updating apps. It was most likely due to an issue that was on my side (running xposed, themes, apps, etc). I just did the three button combo reboot, and...
  27. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    From what I have read in the OPO forums, AirWatch sees the device type and marks it non-compliant, root or not. This is true even on the original One Plus One rom. UnWatch does not work on the AirWatch Container app. There hasn't been a workaround created for AirWatch Container that I am aware of.
  28. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    I wonder if it would be worth modifying the signature of the apk for v5.3.2.790 as a way to prevent accidental updating to the newer version. I also wonder if it would still install and run correctly with a modified sig. Thoughts?
  29. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    You sir, are a genius!!! I tried different apns-conf files, but never thought to edit the original. I added the APNs I needed, and removed the rest. Wiped and reflashed. LTE is now working as it should. Thank you!
  30. Philux

    Post [ROM][AOSP][UNOFFICIAL][RESURRECTION REMIX v5.7.4] HLTESPR MM 6.0.1 9/20/16

    I have been silently following this thread since it was first started. I decided to jump off the modified stock rom I threw together and try out some Marshmallow love. I ran into a roadblock that I know stems from the roots of Cyanogenmod. The good ol' APN issue. "Access Point Name settings...
  31. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    I can also confirm that after updating to AirWatch Agent v6.0.0.143 my device was flagged as compromised. I reverted back to 5.3.2.790 for the time being. I'm about done with having MDM services on my device. :mad:
  32. Philux

    Post [MOD] N900P - Mod Removed - Please Delete!

    Did you flash rom first using odin, or come from an upgrade? Edit: Come to think of it, I don't remember OK2 having the yellow Sprint logo. Are you sure you are on OK2?
  33. Philux

    Post Ok2 Deodexed rom?

    [Temporary place holder]
  34. Philux

    Thread [MOD] N900P - Mod Removed - Please Delete!

    This mod has been removed. Moderators please delete this thread as it is no longer useful.
  35. Philux

    Post [TOOL/UTILITY][TWRP][3.0][RECOVERY] TWRP 3.0.2-0 TeamWin Recovery Project 4/5

    I get this same exact error. I would love to know if you ever got around to figuring out what is causing this error.
  36. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    Updated Agent to 5.3.0.724 and everything is still good. If anyone is hesitant on updating, you should be good to go. Sent from my SM-N900P using Tapatalk
  37. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    I am running Xposed v74, AirWatch Agent 5.2.4.695, and UnWatch 1.1 Everything on my device is working as it should. (Note3 running CM12.1) I think if your device gets flagged as non compliant your IT department will have to reset your AirWatch profile. I would have them delete your device...
  38. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    Really! That is great news! Airwatch must have blocked me because it thought I switched devices or something. I came from an official nonrooted Samsung OH1 Rom to CM12.1 that I restored in recovery. Who knows. I will give it another shot tomorrow. I can confirm this is working on Samsung Note...
  39. Philux

    Post [APP][XPOSED]unWatch - Full ROOT support for Airwatch-secured devices!

    Will unWatch work running Cyanogenmod 5.1.1? Edit: Nevermind... It failed under CM12.1 Now I am locked out of Airwatch until I get my account reset again.
  40. Philux

    Post [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr

    I'm not having any issues with ring tones & notification tones. They are all there and working on mine. Nightly 2015.05.23
  41. Philux

    Post [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr

    Anyone know why there has not been a nightly released in the last four days? The last nightly was cm-12.1-20150518-NIGHTLY-hltespr.zip Edit: Found out BuildBot had some sort of issue building the nightly. The problem has now been resolved, and cm-12.1-20150523-NIGHTLY-hltespr.zip has been released.
  42. Philux

    Post [ROM][L900] Official Nightlies CM 12.1

    Xposed is working on 5.1 however it is still in alpha stage and only some modules are working. If Xposed is causing a boot loop for you, it is most likely one of your modules. If you are upgrading from 12 to 12.1 you need to disable all Xposed modules before upgrading. If you have already...
  43. Philux

    Post [ROM][L900] Official Nightlies CM 12.1

    Was the FC's Google Apps related? When I updated from 12 to 12.1 I had to flash Google Apps for Android 5.1 to make everything work correctly. You can find Google Apps for CM12.1 (Android 5.1) at PA-GOOGLE APPS Plus(All ROM's) or also in the CyanogenMod Wiki ---------- Post added at 02:16 PM...
  44. Philux

    Post [ROM][OFFICIAL][Lollipop 5.1][HLTESPR] PAC-ROM LP

    I wouldn't mind trying out the OC5 Baseband. Do you have it, or seen it posted anywhere?
  45. Philux

    Post [ROM] [ hltespr ] AICP - 10.0 - LP 5.1.1_r6 | OFFICIAL NIGHTLIES

    To temporarily set SELinux to Permissive Mode open up a terminal and type: su setenforce 0 Or you can install SELinuxModeChanger and it will change it to Permissive or Enforcing depending on what you select every time you boot. I've tested and used both these methods in CyanogenMod 12 and 12.1...
  46. Philux

    Post [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr

    Its because starting with the April 17th Nightly; CM12 is now CM12.1. Its not CyanogenMods fault you do not have the right Google Apps installed. CyanogenMod does not officially support Google Apps. Everything that is crashing on you is because the Google Apps you do have installed is for CM12...
  47. Philux

    Post [Q] Have data but calls/text dont work

    ViSXN3N is here http://forum.xda-developers.com/showthread.php?t=2696396
  48. Philux

    Post [Q] Have data but calls/text dont work

    The old versions might have worked, but the new ones will not because of telephony changes done by CM on April03. Its getting hung up on the device name from build.prop. At least that has been my experience in the past. Do an advanced wipe. Data/System/Cache/Dalvik Do a Reboot to recovery...
  49. Philux

    Post [Q] Have data but calls/text dont work

    Your on the wrong version of CM12. You need to be using hltespr. Your on hlte. Download from here http://download.cyanogenmod.org/?device=hltespr
  50. Philux

    Post [Q] Have data but calls/text dont work

    What kernel are you using? You should be using the Stock CM12 Kernel with the same build date as your CM12 Install. If you are running a different kernel on Official CM12 it will cause you to loose voice service. This issue started on April 03 2015 Nightly and hasn't been fixed yet. What...