Search results

  1. K

    Post New Joying Android 10 UIS7862 Octacore 1.8GHz (4GB RAM, 64GB flash)

    My unit runs at 60 at ambient (23°C). Worthwhile question...
  2. K

    Post New Joying Android 10 UIS7862 Octacore 1.8GHz (4GB RAM, 64GB flash)

    Failing that is it not possible to use the proprietary driver blobs and the MCU control apps posted here?
  3. K

    Post New Joying Android 10 UIS7862 Octacore 1.8GHz (4GB RAM, 64GB flash)

    I also found the BSP and kernel source codes, very recently uploaded. BSP source on Github Github root of unisoc-android that has tons of other things I do not yet understand in there The same guy has a bootloader unlock tool on his personal Github. @surfer63 is this of any interest to you?
  4. K

    Post New Joying Android 10 UIS7862 Octacore 1.8GHz (4GB RAM, 64GB flash)

    Hey guys, Here's some info for my UIS7862 based unit for my 1st Gen/GG Mazda 6. I believe it is the same as the Joying units, both made by FYT. Bought it from ZWNav on Aliexpress - seller has been pretty helpful, which is good because it didn't come with an install manual. I've run Device HW...
  5. K

    Post [GCAM] [MOD] UltraCam v8 [12.02.2021 update]

    Hi there, I'm having issues with V8 on the most recent build of Project 404 on umi. Attached logcat. It works fantastic on this device under crDroid - any ideas as to what the issue is?
  6. K

    Post [10.0] LineageOS 17.1 for Mi 6

    Clean your earpiece out with Blu-Tac. I have to clean mine once a fortnight or so.
  7. K

    Post Google Camera by Urnyx05

    Xiaomi Mi6 crashes on front camera photo Hey Urnyx05, I'm having an issue with the front camera crashing upon taking a photo. Fantastic port otherwise. - Camera2 Test (included description) (Attached log from Camera2Test, renamed from html to txt as I couldn't upload html directly.) - Phone...
  8. K

    Post Google Camera by Urnyx05

    Crash with front camera on Xiaomi Mi6 [DELETED, forgot to mention]
  9. K

    Post [GUIDE] Automatic dual sim switching on latest official OTA

    Spent a few hours trying to figure this out for Oreo only to find your post about 5s before I found the solution myself! Many thanks. I've linked your post here to go with my N-only guide.
  10. K

    Post [EOL] Resurrection Remix-OS 6.2.1

    Hi NeoArian, I'm trying to use a Google Camera version with telephoto lens support but I can't seem to get it running. Does this ROM support using the telephoto camera or am I missing something? Below post from other thread showing setup used.
  11. K

    Post [Support][Feedback] GCam HDR+ for Mi6

    Hi fu24, I can't seem to get any of your mods to work. In Camera2 Test it only shows Cameras 0 and 1. When switching to the telephoto lens the Camera app crashes. I then have to reinstall the app to get back into the camera. Any ideas? Is there any debug info I can get for you to help? Mi6 All...
  12. K

    Post [GUIDE] [ROOT] Switch off individual SIMs with Tasker.

    Sorry for not updating this - I have discovered this method only works on Nougat ROMs. Haven't looked into a fix for Oreo yet, but I will soon.
  13. K

    Post Google Camera HDR+

    I also tried this with cstark27_GCam_5.1.018_24_tele_v0.1a.apk with and without module. Both FC. I'm not easily confused but all these different camera combos have got me scratching my noggin :confused:
  14. K

    Post [OFFICIAL][8.1.0] LineageOS 15.1 for sagit

    Sorry for such an off-topic post, but who is Ivan? Guessing he is somebody working at Xiaomi? Great to hear that the LOS team has contacts there if that is the case.
  15. K

    Thread [GUIDE] [ROOT] Switch off individual SIMs with Tasker.

    X-Posted from the Mi6 forum and Stack Overflow. I wanted to do this the whole time I had my Mi5 (RIP) but couldn't figure out how. Could anybody test on their Mi5 and let me know if it works?
  16. K

    Thread [GUIDE] [ROOT] Switch off individual SIMs with Tasker.

    I know that looking for this answer has bugged me for the past few years, so figured I'd x-post from Stack Overflow. I have found the solution to switching either SIM off in the Mi6 automatically. Will likely work with other phones. The whole question and answer you can find on Stack Overflow...
  17. K

    Post Usb Port Fix

    What exactly is wrong with it?
  18. K

    Post [ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

    I have a 32GB model here with exactly the same problem. Cleaning all electrical contacts to the screen and clean flashing seems to solve it for ~2 weeks and the problem comes back. Given the cleaning has an effect I have a ultrasonic cleaner on the way, so I'll run the mainboard through that...
  19. K

    Post Screen not working after some minutes

    I'm having the exact same problem with my wife's Mi5 too. I thought she was talking rubbish until I started using the phone full time over the past few weeks. Symptoms: Screen switches on and accepts one touch event. Screen is then unresponsive to touch events. All other buttons (home, power...
  20. K

    Post [ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

    bgcngm would this have any relevance to LOS?
  21. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    It works on any firmware - just need to install Tasker and restore the XML. The APK doesn't work yet, and I can't figure out why :confused: Another thing I've found in testing that isn't in my post is that it takes ~60 seconds or so to start working. I believe this is due to the Android boot...
  22. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Good news everybody! I've figured out steering wheel controls. IntentKeys v1.0 How it works, for those who care The primary system service is BaseService.apk. This handles communication to all anciliaries, like SWC, sound card, and MCU. When a SWC is pressed BaseService.apk sends out an...
  23. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Lol I got banned pretty much straight away for sharing URLs. It would be good if other people had a shot too.
  24. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Hi guys, A quick update. A few things were annoying me in regards to my firmware so I've started a search for something more up to date again. I have bugged sellers to send me a copy of their firmware, and I suggest you do the same. Tell them that your device won't boot (entered a boot loop)...
  25. K

    Post [ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

    Osm0sis' fix permissions script will fix this.
  26. K

    Post [ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

    I've also found that the mobile network isn't 100% stable. There is two conditions that I've observed where it all goes pear shaped: When leaving the vicinity of a Wi-Fi AP it occasionally does not reconnect to mobile data. When leaving an area with no reception it occasionally fails to...
  27. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    I believe so, but I'll confirm in the morning when I dig up the audio breakout cable.
  28. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Hey guys, While setting up my partner's head unit I've discovered a potential fix for those not being able to map their steering wheel controls for volume. What I did was switch mode to "Mode 2" and then mapped the keys. Seems to be reproducible but I haven't tried it on my car yet. Any of...
  29. K

    Post [BETA][2017.10.01] SuperSU v2.82 SR5

    That's what mine was doing up until now. Did you do a clean install? What I did: Backed up /data and copied to PC Formatted /data and /cache as F2FS Restored /data backup Ran fix contexts + flashed osm0sis' fix permissions script (to fix the discrepancy between file systems) Flashed 2.79 SR1
  30. K

    Post [BETA][2017.10.01] SuperSU v2.82 SR5

    Sorry meant to say all that...CM14.1 final nightly. Installed in systemless mode.
  31. K

    Post [BETA][2017.10.01] SuperSU v2.82 SR5

    Yes! :D F2FS working fine here now. Xiaomi Mi5 on 2.79 SR1. You're a legend Chainfire !
  32. K

    Post [ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

    Man alive the change log for the next nightly is massive! You guys have been busy! I can see there's tons of kernel commits - half the stuff is beyond me, so can anybody provide a normie explanation as to what they do? :D
  33. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Hey guys, Sorry I haven't been around, been busy and have been enjoying my Head Unit. So far I haven't had any luck with getting the track skip buttons to work, and I haven't bothered with it too much as the track skip buttons in Car Launcher Pro suffice for the most part. It is annoying not...
  34. K

    Post [RECOVERY][OFFICIAL] TWRP for Xiaomi Mi 5

    Got it working, finally. For those of you who have the same problem after converting to F2FS, here's what I did to get SuperSU working. 1) Format all partitions as EXT4. 2) Install CM13 and SuperSU (I used v2.78 stable, NOT SR4) 3) Backup /data, copy backup to your PC/OTG. 4) Reboot recovery...
  35. K

    Post [RECOVERY][OFFICIAL] TWRP for Xiaomi Mi 5

    Didn't work. Is that file any different to the SR4 zip shared by Chainfire? As I've already tried 2.76, 2.77, 2.78 stable, SR1-4, 2.52. None flash successfully.
  36. K

    Post [RECOVERY][OFFICIAL] TWRP for Xiaomi Mi 5

    bgcngm, sorry to be a pain but I've just done a clean install to the latest nightly and this SuperSU bug still persists :( Let me know if there is anything I can do to help.
  37. K

    Post [V4A][IRS] Impulse Response Sample Index

    Thanks for this. Just got myself a measurement microphone for the HTPC and have been trying to figure out if I can do correction with my Android Head Unit as well. Will be giving this a go when it arrives!
  38. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Quick post before I get back to work ;) Sorry, I did but must have forgotten to post it :silly: It was otherwise identical to another build that was sent in. Which build I can't remember, so I'll have to have a look after work! In terms of moving to the custom ROM, if you already have root...
  39. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Got my second Mazda 6 SLX7786 unit today, which is my partners' Xmas present. I'll see if I can do a teardown and take some internal shots. :)
  40. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Gotta start somewhere! :) Cool, thanks. I'm assuming that you've got a Mazda 3 because there is no Host.apk. Would you mind posting the link of where you purchased your unit from? Sorry, I'm not quite sure I understand :(
  41. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    The only difference between images are the JAX Settings APKs. The image I've posted has none of them included so it should boot OK for you. After you've got the ROM booted we can get the Accord APKs flashed via Flashfire to get the rest sorted. I would make anther full image for you but it...
  42. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Are you sure you flashed the right one? It's this one here. There is no Radio.apk in this version so you shouldn't be seeing it at all! That firmware has all the JAX APKs removed, so volume and source control won't work with this firmware. It's just to test that the base ROM boots OK on your...
  43. K

    Post [Android 4.2+][ROOT][2017.09.21] FlashFire v0.73

    I'm really interested in how Flashfire works from a technical viewpoint, but I can't find anything. Does anybody know if there's any literature along those lines?
  44. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    AbduL_PT wondering if you could lend some assistance with porting your unofficial TWRP over to this device? Here is a zip with the recovery, kernel, boot and parameter files included. I'd do it myself but with no flash mode or ADB working I'm worried about stuffing it up :laugh:
  45. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Good to hear! Could you please post where you bought your unit from so we can add it as a confirmed SLX7786 unit?
  46. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    rizu3544 I've compiled a ROM with no JAX settings APKs. Could you please flash this and let me know if it fixes your boot problem?
  47. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    Cool, clears things up for me a bit. My unit does go directly to the radio app, but doesn't lock up - it might have something to do with my unit not having any radio in it. I'll do a test build with the Accord Radio.apk in it and send it to you and see if that works. :good: EDIT - The Accord8...
  48. K

    Post [JAX SLX7786] Android 4.4 Head Unit - RK3188, 1GB RAM, 1024x600

    loza1 just compared your backup with the latest base we have, it's identical except for the English specific apps, the Busybox install and root. Try flashing the custom ROM and let me know if that solves your problems. nguyentoogood I've got a chance to have a look at your backup today as...