Search results

  1. M

    Post Missing rSAP support..

    Did someone try to root and install this http://www.android-rsap.com/bluetoot...s-profile.html on the DUOS version? I like this phone but I hate the missing RSAP funcionality... (I have the Exynos version)
  2. M

    Post S8 is much slower than the Google Pixel?

    No problems here. It's really fast. Faster than my old S6 Edge.
  3. M

    Thread Stay on display with transparent cover

    Hi, I'm using the S8 and I'm really happy. It's great device. But I cannot find and setting to Keep the Stay on Display on if the Cover is closed. I have the transparent one from samsung and I would like to see the Display but if you close it then the Stay on Display is going Off. Any Ideas how...
  4. M

    Post [ROM][4.4.4]VanirAOSP[OFFICIAL][Samsung X Cover 2-GT-S7710]

    Hi, I looked a bit to the radio problem. This was on my device too. What I did: - Device with latest Firmware XXAND2 - Flashed CWM - Flashed Vanir - Flashed GAPPS -> No Radio. Imei and radio informations were not availible. The reason is not the efs partition. It's the version of modem...
  5. M

    Post [ROM][2.3.6][XWLA4] UltraToxic ROM 8.1 - Lite'ning Themed

    Hi, is there maybe a problem with 8.01 and Jkay? 8 worked great, but after update to 8.01 boot loop in the start of androids GUI. The status bar is crashing. Markinus
  6. M

    Post [PRJ][17.09.11] Android/Linux on TG01 development, new stuff in git

    100% hmm , I don't believe it. This device has some hardware, which is only used in this one. I think WLAN and BT shouldn't be a big problem. Its some work but should be possible. RIL is difficoult. If you have luck then you can find a compitible libril, then is could be done fast (SMD or RPC)...
  7. M

    Post [PRJ][17.09.11] Android/Linux on TG01 development, new stuff in git

    hi! there is not a kitchen. Mount it and do your changes. All done by hand. For WLAN you need on android side the modifications in libhardware_lagacy.so. But you need as first the kernel modifications. That means correct MMC init and then correct wlan drivers which are working with that AR...
  8. M

    Post [PRJ][17.09.11] Android/Linux on TG01 development, new stuff in git

    here are the kernel sources: http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc/commits/linux-on-tg01 clone, checkout, compile and test. Here is a fresh compiled kernel, but I couldn't test it because my device is not here. Test all this stuff at you own risk.
  9. M

    Post [PRJ][17.09.11] Android/Linux on TG01 development, new stuff in git

    HI! added some new stuff to repo. Changed first Page, some new Info there. For me its the end of TG01 dev. Have no time. If you want to real use it, then you have to concentrate for a new RIL lib. The best would be to write a new one, RPC based like in WinMo. But that is much work. USB...
  10. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    hi use the flash.cfg in first post for tmous users.Replace the one in 1.7 build.
  11. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    it's dependend on radio. Simple take a call and then drop the call. Then the voice is good.
  12. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    It is not realy working. It's dirty and absolutly dangerous.
  13. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    USB MASS STORAGE MODE IS DANGEROUS IF YOU BOOT FROM SD! You boot from SD and then you will export this card over USB, if the system will use the data or system then it crash or corrupt you sd card! For all SD Builds use MAGLDR mass storage or wince to copy files there.
  14. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    great that this is working now. The data stuff can by very different between the builds. Its very recommendable to use a new datastorage for every build!!! Else you can have crashes etc.
  15. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    for sd problems with magldr boot, take try this initrd
  16. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    for browser problems, use this flash version: http://forum.xda-developers.com/attachment.php?attachmentid=507808&d=1296746097
  17. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    Don't try that, the sys types have nothing to do with you problems. People with sd card problems try this initrd. I think the reason is, that some sd cards are not partitioned. Then the mount fails. THIS initrd only for wince users!
  18. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    did this not work with this images?? The names are different and system type is ext3, this is all . . Are you sure you need more than 512 MB? ;) Here is 1GB . .
  19. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    they don't work without sense . . . keyboard could be possible, never tested,
  20. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    I added a update in post1 for wince users. I cannot test it but it should work.
  21. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    ha! ;) I looking to the browser, but it seems strange, on some devs it works very good, on some not. I using VPN PPTP the whole time and and works great. Hmm, cannot test Cisco. How do you configure it, through the menu or my hand? Market?? Hmm, I downoad much stuff since 1.71 and it works...
  22. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    hmm, strange. Works here great. Maybe a other installed app?
  23. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    Hi! in my build wifi works in standby. This is the reason why you see more power. I you want that wifi disabled, go to wifi settings and activate the wifi standby policy. Markinus
  24. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    Hi! this was my copy/paste mistake. It's not Launcher Pro, it's the Gingerbread Launcher, there no options. You can get Launcher Pro from Market. Markinus
  25. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    I released a SD Version! Link is in first post.
  26. M

    Post [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    hmm, right, for sd version 1.13 is not needed. 1.11 should be enough
  27. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    Did you maybe look in adb logcat? I need some more informations what is going wrong. I have no Idea how to test it myself. Connect usb dev mode, start a "adb logcat" in a command shell. Then do in your mobile that what do a FC. After FC copy the output from command shell and paste bin it. (e.g...
  28. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    liblights is the default one from original desires froyo builds.
  29. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    hi! yes, is correct. You can use it in this way. And right, no 24M, you have enough place ;)
  30. M

    Thread [6 Feb]MAG/CE SD MarkinuX HD ExtraClean V1.71b[fast, small, DesHD-WO Sense, DailyUse]

    Hi! I released a SD Version of my ROM. The Idea behind it is a mix from HTC Hardwarelibs/Settings and APPs but without Sense. The Build is based on a new Desire HD Build (Android 2.2.1). I removed all HTC Widgeds, Sensestuff, etc. But I let some Apps, like Camera, Album, Musicplayer...
  31. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    From 1.7 and above system is mtdblock3 (because as CMR)
  32. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    the 1.71 Update installs my newest kernel (stock repo)
  33. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    Hmm, should work. nothing is squashed. You need only a software with root rights. Don't know adfree.
  34. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    Hi! I fixed now the win-key problem with the lockscreen. Will add it to the update tomorrow. Markinus
  35. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    FC? You mean a crash? Hmm, I don't know that I changed something in this direction. Hmmm. Could you look in logcat if that happend? (connect with adb and then: "adb logcat".)
  36. M

    Post *** UPDATED 1/19/11 *** HD2 G-Sensor Solved!

    HI! I fixed this problem in the kernel. Markinus
  37. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    HI! some news. I found the gsensor face-down calibration problem. Fixed in in kernel. Should now works with all orig files from desire or HD. Will add a update. Markinus
  38. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    hmm, strange, here it works very nice, I use it permanently.
  39. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    Hi! space is a problem. On one side, we can have much space if I sqaush anything. But you have the problem, that you cannot replace anything without squash/usquash. Till 1.6 I sqashed parts, but still much users needen modifications. I thought longer about a compromize. But in the moment I say...
  40. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    app2sd+ works good. All applications are moved to sd. Only some application data is in nand. Better for performance and the internal space is used.
  41. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    do not install cmr images! Use my build! Cmr images have other partition layout for cache, no prepared for 24m! Simple install my dft 1.7 there is cmr 1.3 in and you can use cmr from magldr after flashing! - as first install magldr 1.13 - as second enable 24m - as third install my dft rom then...
  42. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    maybe there is a problem with a restore. Try a clean version.
  43. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    I wrote in post one to overclock, that you have to change the batch file. Change partition von 0 to 2.
  44. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    ALL WORKS! USE DAF.EXE for flash NOT install.exe!!!
  45. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    HI! I working on 1.7. I fixed the browser problems. I will remove now all sqash files too, because to much people want to change something. And I will prepare the partition layout for CM. Markinus
  46. M

    Post [5 FEB]MarkinuX HD Extra Clean V1.71 [app2sd+, DesHD-WO Sense, DailyUse] [KERNEL?]

    It happends if you configure you gmail account on start of the system in the wizard, he knows what you downloaded and download all stuff again. Skip the gmail account in wizard and create later by hand. You formated your second partiton on sd, right?