Search results

  1. jonitfcfan

    Post Accessories Case Pr0n

    A couple of times, yeah. I wondered if maybe there was some dust/dirt covering the proximity sensor at the time (not sure where exactly the sensor is, though) as I do get a fair bit building up around the edges at times. Maybe try blowing or wiping the dust off around the top and see if it...
  2. jonitfcfan

    Post Question Haptic engine adjustable?

    If you haven't already you can have a look under Sound & Vibration > Phone ringtone > Vibration Pattern & Intensity and see what intensity is currently set. Otherwise there's no other way I know of (so far) to increase it further.
  3. jonitfcfan

    Post Accessories Case Pr0n

    I have this one... https://www.amazon.co.uk/Ringke-Compatible-Transparent-Camouflage-Shockproof-Camo-Black/dp/B08W77Q1F5/ I like how it goes with the Pine Green
  4. jonitfcfan

    Post Question What Magisk modules are you using?

    What about Energy Bar? I'm currently using this on my OP9 Pro. As I type this I also noticed the same developer has a version which puts a battery ring around the punch-hole camera if you prefer that sort of thing (I might try it myself).
  5. jonitfcfan

    Post Question Usb pd 3.0 45w

    Perhaps your current USB voltage tester doesn't support PD 3.0? See what happens with the new one.
  6. jonitfcfan

    Post Question [SOLVED] - Bootloop with completely new OPO9pro after oem unlock

    I haven't tried this yet, but I found this link which seems to give a different fastboot command to use. Not sure how much difference it'll make for other users but thought I'd link to it just in case it helps others. I'll probably try it either tomorrow or over the weekend.
  7. jonitfcfan

    Post [ROM][Pie][OFFICIAL]Resurrection Remix v7.0.2 [unified 3/3t]

    One small thing I've noticed with the 20180422 build: the "sRGB" and "DCI-P3" options in the new "Colour profile" setting under LiveDisplay don't appear to stick on reboot. It reverts back to "Standard". Does anyone else get this? [EDIT]: Sorry, forgot to mention this is on the OnePlus 3 (not T)
  8. jonitfcfan

    Post [APP][5.0+] Blokada ad blocker [open source][without root][v4]

    I've installed this on my OnePlus 3 running Marshmallow and it runs very well for the most part ("start on boot" is active). There's one thing I've noticed though. When I open the app to tick which hosts files I want active in the blacklist and then reboot the phone, it reverts to its default...
  9. jonitfcfan

    Thread [BOOTANIMATION]Alternative OnePlus logo boot animation

    I thought I'd give making a boot animation for the OnePlus 3 a go. I basically chopped up the OnePlus logo and added some different animations to different bits, nothing too fancy. Here's a YouTube preview of what it looks like (unfortunately the video doesn't seem to be in 60fps like it...
  10. jonitfcfan

    Post [APP][5.0+][2020.12.22] CF.lumen v3.74

    Different device but same problem, even after updating to v3.66. Using this on a Galaxy Note 4 N910F, with stock ROM and Emotion kernel. If it makes any difference I use the colour temperature setting both for sundown and sleep modes, using the CF.lumen driver in "Compatibility" mode. I...
  11. jonitfcfan

    Post [N910F]Random reboots (links to logs included)

    [UPDATE] I've decided to go through my network provider to get a replacement sent out to me, which they were happy to do after going through their line of questioning over the phone ("have you tried turning it off and on again", "did you try taking out your memory card and see if that helped"...
  12. jonitfcfan

    Post [N910F]Random reboots (links to logs included)

    *bump* [UPDATE]: Once or twice when it's crashed as above, it would try and boot again but then reboot into download mode with the following text at the top of the screen above all the other info: Could not do normal boot. ddi: mmc_read failed If I then pull the battery and turn it on again...
  13. jonitfcfan

    Thread [N910F]Random reboots (links to logs included)

    Hi, My N910F has recently been acting weirdly. It either randomly reboots itself, or just freezes for several seconds when switching screens or scrolling/tapping buttons. This started a couple of weeks ago on stock 5.0.1 (this version, I think) running Emotion kernel. This was running fine...
  14. jonitfcfan

    Post Which Note 4 Cases Have Port Covers?

    There is also the Supcase Unicorn Beetle Pro (strange name lol). If it matters to you it's one of the few cases I've seen which also covers the stylus.
  15. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I too would like to ask about the LED brightness. When running the ICS version of Siyah the LED was quite bright (the way I like it :)) but having recently flashed a JB ROM followed by the JB version of this kernel (v1.8.7) I noticed the LED seems a bit dimmer. Is the brightness something that...
  16. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    Did you do a checksum on the download as per this post?
  17. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I think this is modem/ROM related, thus you should ask in the general discussion thread. On another note I'd be sorry for us to lose someone like GM in the S3 kernel scene, but thanks for all that you've done up to now and all the best to you, whatever you do :).
  18. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    What volume hack? You mean the mod to change music tracks when you hold the volume keys? If so that should be available under 'Settings' > 'Rom Customizer' > 'ROM Settings' > 'Choose modifications' > 'Choose 'n tweak lockscreens', then toggle 'Skip song'.
  19. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    (Better late than never) What he meant to say is that you should be a bit more patient around here. While there may be lots of people here on XDA they aren't always present round this way in order to answer everyone's questions in the blink of an eye. There are real people behind the usernames...
  20. jonitfcfan

    Post [ROM]-[JB]-[--VK--™]-[-XXDLIB-V-1.1-]-[-Beauty & stable-] UpComing Soon

    At the time of posting he's offline. How convenient...
  21. jonitfcfan

    Post [ROM]-[JB]-[--VK--™]-[-XXDLIB-V-1.1-]-[-Beauty & stable-] UpComing Soon

    You've labelled your thread 'ROM'. Don't try and pull the bloody wool over our eyes.
  22. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    You could try one of the following if you haven't done so already: - Check the folder permissions of the Alliance folder. If it shows as belonging to the root user perhaps try changing permissions/ownership to non-root user (I don't use Root Explorer so I can't tell you where the option to do...
  23. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    Have you tried using a root-enabled file explorer to delete it?
  24. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I don't always post on this thread, but when I do I make sure something like this is included in my post :p: ID4SB886932W8396631 ($10, or £6.42 in my realm at the time of writing) Even though I'm not running your JB kernel (not yet, at least ;)) I appreciate the work you put into the ICS...
  25. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    How the hell do you get every folder twice? Nothing like that on my end. Perhaps flashing in recovery mode will help.
  26. jonitfcfan

    Post [ROM]AllianceROM LH3 ICS Final Update | Smoother than JB | 16 LockScreens 4/11/2012

    Patience is a virtue :). EDIT: Lol got beaten to it
  27. jonitfcfan

    Post Cheapest in UK

    Greetings, I've been looking for a UK retailer that has the TF700 in stock but couldn't find one :eek:. Good thing I stumbled on this thread :). Slightly off topic but I'm guessing the original release date (31st August) for us got pushed back since I couldn't find anyone in the UK that had...
  28. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    [Slightly off topic hat on] Don't know if this helps or if you knew it already, but a quick Google search reveals that model number to be the upcoming international LTE version of the S3 :). If you knew this already just ignore me :silly:. [/Slightly off topic hat off]
  29. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I think that option only works in tandem with the Better Battery Stats app (might be wrong), so if you have it installed already then by all means go for it and tick it.
  30. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Does anyone have a zip file for v1.5.1 that they would be able to upload please? I only see v1.5.2 on Dev Host. Thanks :)
  31. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Gestures - see this thread LED fading - basically you can change the default behaviour of the LED light when you get notifications. You can choose either straight on/off 'blinking' (my personal preference), or you can have it 'fade' in/out. Hope this helps :).
  32. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Thanks for including an LED fade/blink toggle in STweaks for v1.5 final, I'll test it out and see how it goes :). [EDIT]: For those who are having problems enabling LED 'fading' after selecting it in STweaks; I got it working by selecting the desired option, then switching the screen off and...
  33. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Usually ROMs include apps like that, not kernels. They merely contain the su binary that apps like SuperSU rely on for root access. Having said that I use SuperSU with this kernel without issues.
  34. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Do any other root apps work (e.g. Titanium Backup)? If so then STweaks probably doesn't have root permissions.
  35. jonitfcfan

    Post Post your SGSIII Homescreens!

    I have the following on my homescreen (from top to bottom): Launch-X Pro (there are two of these widgets on my homescreen) Advanced Task Manager Battery Widget Light Flow Extended Controls Theme: default theme with AllianceROM v1 Launcher: Apex Launcher
  36. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I've flashed Franco on top of previous versions of Siyah before without any major side effects. You might just find the STweaks app is still there in which case you can just remove it. Other than that you should be good to just flash away :).
  37. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Just some quick feedback on this, I've currently got mine set to 57 in the speaker_tuning_level file with the 'Speaker Tuning' checkbox ticked in STweaks, and as far as I can tell I don't get any distortion in my music (mostly hip-hop). Not sure about anyone else here... Also (silly question)...
  38. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    I can't reproduce this either, tried with both PowerAMP and the stock music player, and the music played through earphones first time round after step 4 (see sig for current ROM/kernel).
  39. jonitfcfan

    Post [KERNEL][01APR][JB][SAMMY&CM] SiyahKernel S3 v1.9.1

    Hi, Just tried searching within this thread to see if this has been talked about before but didn't find anything initially, so here goes... I've been experimenting between Siyah and Franco on my S3 and so far Siyah seems to offer a bit more for me (haven't got round to updating my sig yet :p)...
  40. jonitfcfan

    Thread [Q] Status bar text colour

    Hi, I'm working on making a theme for the Samsung Galaxy S and one of the things I've been looking to do recently is to change the text colour of the notifications in the pull down menu. So I edited some of the XMLs and it seemed to work...almost. Here's a screenshot below of what I've done...
  41. jonitfcfan

    Thread [Q] Twitter and/or Foursquare app with SSL?

    Hi, I'm currently looking for a good Twitter and/or Foursquare client for the Android platform, but I'm not too sure which of the ones currently available in the Market either have an option in the settings to connect via secure connection (i.e. SSL) or which connect this way by default. I...
  42. jonitfcfan

    Post Super amoled vs qhd...fight?

    qHD is the screen resolution, not the screen 'type' as such. But yes AMOLED screens are good :).
  43. jonitfcfan

    Post [REQUEST]Search within a single thread

    Haha I probably was high for all I know :p. Yes it was a big fail on my part, even though I don't come here all that often :D. This won't go away anytime soon, will it :o?
  44. jonitfcfan

    Post [REQUEST]Search within a single thread

    **** :o...yeah, bit like that :D. Thanks for pointing out my stupidity :p.
  45. jonitfcfan

    Thread [REQUEST]Search within a single thread

    Hi there, I apologise if this has been asked before (if it has can someone please redirect me to the relevent request?) but this is something I think would be nice to have for the XDA website if such a thing were possible to implement: searching for keywords within just one thread. Think about...
  46. jonitfcfan

    Post [KERNEL] Semaphore 2.7.4 (CF-Root + Voodoo Snd v10 + OC/UV + BLN)

    Did you make sure to copy the 'enable_tun' script to the /system/etc/init.d directory? Did you also make sure that OpenVPN Settings isn't already trying to load the tun module itself (i.e. did you untick the 'Load tun kernel module' box)?