• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Search results

  1. G

    Post RemixOS on Toshiba Encore 2 (WT10-A32) NO REPARTITIONING

    Hi all, Just to give you news of a almost perfectly ROM working on this table. github.com/ouija/android-x86-toshiba_encore2
  2. G

    Post [OnePlus 6T (Global)][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds

    Just want to Thank you. With yours steps i finally got my Oneplus 6T back online :laugh:. Do I need to format data and lose my internal storage everytime i get to OOS?
  3. G

    Post [OnePlus 6T (Global)][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds

    I want now go back to OOS. So i flash OOS, finalize.zip, twrp, format data and reboot system. Is that right? Thanks.
  4. G

    Post [OnePlus 6T (Global)][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds

    Thanks you. After Turn off the phone it booted to pixen on slot B ? . Now i can do everything again. Why the system didn't boot up after OOS flash? It was because not flashing the finalize.zip? Do i need to flash twrp in both slots? Thanks
  5. G

    Post [OnePlus 6T (Global)][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds

    I've installed OOS 10 from twrp and now it goes always to OOS recovery. I had Pixen Rom then i had to go to stock. I've erased data then install OOS 10 in twrp, forgot to install twrp again after install and now it doesn't boot. I'm without computer now. Can anyone explain me please the...
  6. G

    Post [ROM][OOSCAM][OFFICIAL][OnePlus 6/6T][10.0_r53]PiXeN-OS[2021/04/12][EOL]

    My screen is getting very dark when using outside. I need to disable auto brightness to work normally. Is there any work around to by pass this? Thank you.
  7. G

    Post [APP][Beta 0.10.1] Tap, Tap: Double tap on back of device gesture from Android 11 port

    Same here on Pixen Oneplus 6T. After sometime, it stops working, I need to disable and enable the turn off screen option to start working again.
  8. G

    Post [APP][Beta 0.10.1] Tap, Tap: Double tap on back of device gesture from Android 11 port

    New update working flawless ?. The sensitivity slide it's perfect. Thank you.
  9. G

    Post [ROM][OOSCAM][OFFICIAL][OnePlus 6/6T][10.0_r53]PiXeN-OS[2021/04/12][EOL]

    It's good but for me, it disable the default open and close windows animation and puts the screen bottom very short, like keyboard its so down that i can't write very well.
  10. G

    Post [ROM][OOSCAM][OFFICIAL][OnePlus 6/6T][10.0_r53]PiXeN-OS[2021/04/12][EOL]

    Amazing ROM, so fast and gorgeous. Can i have back gesture like OOS? Tried 3rd apps but are laggy. Thank your for such amazing ROM
  11. G

    Post Paranoid Android Quartz 5 - OnePlus 6T

    Hi, can anyone tell me how is battery life and if it as full screen gestures like OOS. Tham you
  12. G

    Post [ROM] LineageOS 14.1 for Samsung Galaxy J3 (2016) [SM-J320FN/F/G/M] [UNOFFICIAL]

    Yes, I'm trying a lot of things. The j6 is very fast with this ROM, but since it's for my daughter, I need the family link
  13. G

    Post [ROM] LineageOS 14.1 for Samsung Galaxy J3 (2016) [SM-J320FN/F/G/M] [UNOFFICIAL]

    Please anyone have a solution for FRP lock using family link? After enabling the family link account, the developers option is missing (obvious) but after restart no boot and stays and frp message ?. Thanks
  14. G

    Post Android 10 Open Beta for OP6T/OP6 now available!!

    Nop, it's not compatible yet. It will brick your phone
  15. G

    Post Android 10 Open Beta for OP6T/OP6 now available!!

    Working perfectly well here. This version it's not for T-Mobile
  16. G

    Post USB C to HDMI?

    Please, can you give me the link for the cable that works with you? Thanks
  17. G

    Post USB C to HDMI?

    Hi, I want to try it the Android Q desktop mode on my Oneplus 6T. Anyone have try it any cable that works fine connecting to an external monitor? If so, please, can you give-me the link? Thank you
  18. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    In the latest update my phone is getting weird. The slide switch it's not enabling the do not disturb mode and sometimes the dt2w it's not working. Anyone facing this issues?
  19. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    I'm Oxygen 9.0. when i updated i needed to wipe all my phone. If i update this version (9.0.2) it will wipe everything again? Thanks
  20. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    I've flashed via twrp and everything was erased. Because it says that can't decrypt the data and must erase all. I've made a backup before.
  21. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    Great UI. Can you tell me what are the widgets you are using?
  22. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    I'm using Franco kernel, do you have tested? So I can compare before test holydragon kernel.
  23. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    Is there anyway to use volume to control media and not ringtone like pie? Thanks
  24. G

    Post [OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

    I can't enable dark mode in latest Google messages(doesn't have that option) but in pie was working with latest version. Is anyone facing this problem?
  25. G

    Post [OP3/3T] Modded Google Camera with HDR+, 60FPS video and Slow Motion

    Anyone know what version have the new night shot mode? thanks
  26. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    xyyx can you change the link of the downloads to point to version 9? It is pointing to version 8 and we need to change the folder to version 9 to download. Thanks
  27. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    You can use Swift Installer. Amazing simple, with all colours and background you want
  28. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    I'm having same issue with Bluetooth car audio. I start listening the audio call then I loose audio and I need to change to phone speaker. Another thing, anyone here using MI band 2 or 3? I can't get the name of the caller even with all enabled, but In Oreo was working fine. Messages is...
  29. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    No, it's different things
  30. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    I disable them normally in settings of the app you want, then set default app in settings too. I don't need freeze with titanium
  31. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Google dialer has more features: - material design - It can detect who is calling based on internet (great feature)
  32. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    What is happening
  33. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Here you have it https://forum.xda-developers.com/oneplus-3t/how-to/firmware-modem-collection-flashable-zips-t3565535
  34. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Is there any place that I can see the changelogs or telegram updates? Thank you
  35. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    For me amazing, 6h of SOT
  36. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    After 2 week of testing, just want thank xyyx for the most amazing and stable ROM that I had in my OP3T. Thank you ?
  37. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    xyyx is it possible when you had time to enable double tap to sleep in any part of the lockscreen not only above the clock? Thanks
  38. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Found it, i'm using 3d live wallpaper, with that the screen off takes 2s, but with normal image it's fast. Thanks
  39. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    With dirty and new flash now, it's the same here.
  40. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Thanks for the tip. I found that is the problem. If i double tap the screen and use fingerprint, it will work fine, but with screen off is taking 2s to unlock. The strange thing it's that in version 16 it was working flawless. Did you change that on this release? And thanks fot such a great ROM...
  41. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    After new flash still getting fingerprint delay ?
  42. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Dirty Flash. The 16 version was working perfect, this one for me is having delay in fingerprint :(
  43. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    New version, i'm getting delay unlocking fingerprint. Anyone else have this problem? Thanks
  44. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    Not here. Must be an app that you have installed i think
  45. G

    Post [ROM] [10.0.0] Nitrogen OS Beta

    It's amazing better for me too