• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Search results

  1. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    This is for OP8|OP8 PRO, not sure will works with 8T. Try to find for your device. P.S. Tested on 11.0.7.7, still works.
  2. V

    Post [OFFICIAL] LineageOS 18.1 for Xiaomi Mi 6 (sagit)

    Ok, flashed latest NikGapps-stock-arm64-11-20210601-signed and everything seems fine.
  3. V

    Post [OFFICIAL] LineageOS 18.1 for Xiaomi Mi 6 (sagit)

    lineage-18.1-20210527-nightly-sagit-signed and NikGapps-stock-arm64-11-20210514-signed. Should i try to flash same gapps or new one?
  4. V

    Post [OFFICIAL] LineageOS 18.1 for Xiaomi Mi 6 (sagit)

    Just perfomed OTA update to latest nightly. Caused a bootloop and restart to TWRP. Oficial lineage OS 18.1, root, magisk, NikGapps. Any suggestions?
  5. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Firmware updated to 11.0.5.5. Instruction the same. Everything working.
  6. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Sorry, this guide for 8, 8 pro. I have't 7t to check. Try this driver, maybe it will help.
  7. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    No, it should not. Try this driver. Don't forget to dissconect phone before reinstalling.
  8. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    After reactivation profile "efsprofiles" folder always overrided with default config. You have to make sure, that “India-VoLTE-Vodafone” Sub0 and Sub1 is active, and “Oversea-Commercial_DS” is removed in PDC. Then, repeat this steps: Run EFC explorer “as administrator” and connect to your phone...
  9. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Glad to hear it, but to be on the safe side, I would still perform manipulations at the time of connection.
  10. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    All manipulations the same way as with "Audio+codec+EVS+HD+.zip" You should make all changes in PDC in moment of EFS Eplorer connecting and scanning file system. Also don't forget to deactivate and then remove "Oversea-Commercial_DS" profile. It's important step. Read carefuly manual and repeat...
  11. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Sorry. Run EFC explorer “as administrator” and connect to your phone if not done earlier. Backup to PC “carrier_policy.xml” and “carrier_policy.xml_Subscription01” from “/policyman/” folder. Replace “carrier_policy.xml” and “carrier_policy.xml_Subscription01” from “carrier_policy_14032021.zip”...
  12. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Hi. Try fresh policy carrier config. Maybe it help
  13. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Do you have VOLTE supported and activated by carrier? Be sure using Sim slot 1 also.
  14. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    What exactly "not working" which step?
  15. V

    Post Root / magisk vs bootloader?

    No. You can try make backup with titanium backup to minimize afterwipe restoration.
  16. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Please report if everything went well. Good luck.
  17. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Ok, folks. I checked again on clean device and latest version OS 11.0.4.4.IN21AA. there are some changes. It's seems like QPST need COM device to communicate. Disconnect your phone. Update Qualcom driver to newer version (download in attachments 1st post section). Connect your phone. After "ADB...
  18. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    Hi, patonovich Same question. Do you have "Qualcomm HS-USB WWAN Adapter 9091" in windows device manager after "setprop sys.usb.config diag,serial_cdev,rmnet,adb" command in ADB Shell? Also, what Build number and Model you have? Attach screenshot
  19. V

    Post [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    zorantoma Hi. Do you have "Qualcomm HS-USB WWAN Adapter 9091" in windows device manager after "setprop sys.usb.config diag,serial_cdev,rmnet,adb" command in ADB Shell?
  20. V

    Thread [Guide] VoLTE/VoWiFi/ViLTE/EVS HD+ codec [no root] latest OOS 11.0.7.7

    To be safe, make a backup via TRWP of your EFS partition BEFORE you flash anything! If you're not rooted, do a nandroid backup via fastboot Steps: 1) Set your stock dialer app as default 2) Download and install “Logkit+v1.0.apk” 3) Open dialer app and enter *#800# Scroll down to...
  21. V

    Post how to disable SecureBoot and delete the system image partition to free up space?:)

    Could yo provide screenshot? Do you have TWRP?
  22. V

    Post how to disable SecureBoot and delete the system image partition to free up space?:)

    lol, it's not useless partitions. They're contain your OS and drivers for hardware. You can wipe it and not boot again. More info here.
  23. V

    Post Is there any way to unlock the bootloader on Xiaomi mi 6 without erasing all data?

    Noway. Make backup with Titanium Backup, for example.
  24. V

    Post Low battery health after replacement

    Only one right way is to measure battery capacity with special charger. Something like this. Drain battery to 0%, turn phone off, connect through device, and charge to 100%.
  25. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    Try to disconnect from all networks and test with just turned on module. So you can understand that it's specific network connection fault or whole wifi stack.
  26. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    I have only one idea - again clean install with minimum apps, one day control check, then consistently installing other software with permanent battery drain control.
  27. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    Are you made clean install with wipe data or dirty flash? What about firmware update? What's your gapps variant?
  28. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    Are you switching to "Show full device usage" mode in Battery manager? Show your screenshot.
  29. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    what the battery manager shows? Who drains battery?
  30. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    I said same thing two pages ago. It's sad. You can disable unused soft from setting, or try to uninstall with side software, but you need root.
  31. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    No ) It's to different photos. One in standart mode and second with Bokhe. Almos sure, it's uses different cameras for each mode, because resolution of images is vary. And there is settings for Bokhe effect.
  32. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    For sure. Here is example for you. Don't look at quality. Recompressed Jpeg becourse of forum limitations. Don't forget, you can manage focus and strength of effect in tweak menu of photo viewer.
  33. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    Here you go. Yes, it have bkeh effect. One of the best camera, that I try.
  34. V

    Post [OFFICIAL] LineageOS 17.1 for sagit

    This cam works well without any movements. ---------- Post added at 06:24 PM ---------- Previous post was at 06:19 PM ---------- Just installed latest nigthly build 20200407. I want to inform you that the latest (open_gapps-arm64-10.0-nano-20200407) Google apps nano inevitably lead to a...
  35. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Hello, NeoArian. Is there any chance, that this build will be updated to 10 version? On 4th October 2019 you said there about stable beta with possible release in few weeks. No news since. I very like this firmware. It will be very sad if it's discontinued. Thanks!
  36. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Try this. But i don't think it will help. Better carefully check instructions.
  37. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    You should install third party app. Call Recorder - SKVALEX one of the best in my opinion.
  38. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Has anyone encountered fingerprint sensor issues in recent updates? When the phone is locked, sometimes the sensor simply does not respond to anything. It's enough just to press the power button and light display to wake it up. I did not find any pattern. This may occur a minute after blocking...
  39. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Confirm, 6.5 version works only with 9.5.15 firmware from NeoArian.
  40. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Well, I think there was a typo. Most likely it meant V9.5.8.0.OCAMIFA firmware from this branch https://sourceforge.net/projects/xiaomi-firmware-updater/files/Stable/ Because the eighth version is only in the https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/ branch, then...
  41. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Hi, NeoArian. Your link for Firmware 8.5.9 not working. Can you provide some more? Thanks!
  42. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Is there option to disable bottom search bar? It's annoying..
  43. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Hey, man. I have some screenshots. Here you go
  44. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    planetera, thank you, everything went fine. Could you explain to me the difference between firmware and ROM? I tried to use google, but everywhere they write that this is the same thing. Thank!
  45. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Well, since no one answered. Can I update the firmware version over the current one from the recovery?
  46. V

    Post [9] AospExtended ROM v6.6 [OFFICIAL]

    Hi. How can I find out the version of my firmware? I have some bugs and thinking it's not 8.10.11. Thanks.
  47. V

    Post [OFFICIAL][8.1.0] LineageOS 15.1 for sagit

    I'm the only one who sees a blank screen for a long time in the smart lock section? Last build.
  48. V

    Post [9][UNOFFICIAL] LineageOS 16.0 for sagit

    Thanks for explanation. And what about Titanium Backup? Will I encounter some bugs, or can use it without fear? I don't want to make annoying tweaks and settings. Thanks!