• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Search results

  1. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    I udated to v7.10 by OTA from v7.9 and MindTheGapps-11.0.0-arm64-20210412_124247.zip, and bootloop occured. Then I reinstall MindTheGapps-11.0.0-arm64-20210412_124247.zip and it works fine. Now, ZenParts-> Vibration strength can be saved fine. Thank you for v7.10.
  2. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for reply and confirm. And these are not critical for me, too.
  3. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    I reinstalled cleanly as follows. (1) factory reset (2) format data (3) advanced wipe (Dalvik/ART cache, cache, data, internal storage, system and micro SD card) (4) install crDroidAndroid-11.0-20210811-X01BD-v7.9.zip from USB-OTG. crDroidAndroid-11.0-20210811-X01BD-v7.9.zip was checked by...
  4. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    I clean installed crDroidAndroid-11.0-20210811-X01BD-v7.9.zip and MindTheGapps-11.0.0-arm64-20210412_124247.zip, and restored apps from google drive and the same issue happened. The stock firmware of UL-ASUS_X01BD-WW-17.2018.2004.424-user.zip was used before the first crDroid...
  5. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for reply. I'll install mindthegapps next time. Thank you very much. I sent logcat via conversation. And changing Zenparts->SELinux mode from permissive to enforced makes 'ZenParts keeps stopping'.
  6. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for v7.9. I updated by OTA, and reinstall NikGapps-core-arm64-11-20210804-signed.zip and NikGapps-Addon-11-Gmail-20210804-signed.zip because of boot loop occured. It works fine other than zenparts->vibration strength.
  7. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for v7.8. I updated by OTA, and reinstall NikGapps-core-arm64-11-20210704-signed.zip because of boot loop occured. It works fine other than zenparts->vibration strength.
  8. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for important information. I'll flash NikGapps-Addon-11-Gmail-signed.zip if it occured again.
  9. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Gmail 2021.05.16.376957181.Release is working. I deinstalled and reinstalled gmail.
  10. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Gmail 2021.05.16.378324220.Release with android system webview 91.0.4472.101 is not working on v7.7.
  11. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for v7.7. I was updated by OTA and boot loop occured again. So I flashed NikGapps-core-arm64-11-20210612-signed.zip and works fine. This version works zenparts-> Vibration strength and I'm very happy. Thank you for good rom.
  12. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    As I failed upgrading to v7.6 from v7.5 via OTA, I reinstall v7.6 cleanly and works fine. As I can't hang up telephone by tapping headset icon while calling on NikGapps-core, I set to hang up by power button.
  13. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for reporting of good working v7.5. I clean installed v7.5, NikGapps-core-arm64-11-20210415-signed.zip, Magisk-v22.1 and they work well. I can't set zenparts->vibration regardless the enforce/permissive mode.
  14. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Is there anyone who can install v7.5 successfully ? I installed v7.5 by OTA but bootloop occured, then I installed NikGapps-core-arm64-11-20210415-signed.zip but bootloop occured again. So, I rollbacked to v7.4 by dirty flash.
  15. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    I could upgrade from 7.3 to 7.4 by OTA successfully. Nikgapps had been backup and restored successfully. I can't set zenparts->vibration regardless enforce/permissive mode.
  16. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for important information of bootloop. And I set zenparts->vibration while permissive mode and then returned to enforce mode. Zenparts->vibration shows default value, but it works with the set value. I'm very happy with v7.3.
  17. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Thank you for v7.3 (20210209). After updating to v7.3 with OTA, a boot loop occurred. Therefore, I dirty flashed NikGapps-core-arm64-11-20210130-signed.zip with TWRP and it started normally. Bluetooth headphones work well. ZenParts -> Vibration couldn't be saved.
  18. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    Today, bluetooth headphones are operational with AAC/LDAC codecs. AptX codec is not operational (No sound and repeated to connected/disconnected.) The difference of today and 2days ago, I installed magisk 8.0.7 and EdXposed 93.0(93-v0.5.1.4_4669_master(SandHook)), yesterday.
  19. I

    Post [ROM][11][OFFICIAL] crDroid v7.10 [X01BD]

    I have installed v7.2 (20210109) cleanly. Here is my problem: 1. WiFi wpa2 TLS authentication has corrupted the CA certificate. This may be due to a memory leak. 2. Bluetooth headphones (SBC/AptX/LDAC) can be connected, but there is no sound. 3. ZenParts -> Vibration cannot be saved.
  20. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    Thank you for v7.2. I installed v7.2 without any troubles. It works fine.
  21. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    Thank you for crDroid 6.12. I could update by OTA successfully. The problem for me is LDAC codec on bluetooth is still not working.
  22. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    I updated to 6.10(20200920) from 6.9 with open_gapps-arm64-10.0-stock-20200918 by dirty flash. I can use bluetooth headphones with SBC/AAC codecs. And bluetooth tethering is working well. If I try to use bluetooth headphones with LDAC codec, the system will be hung up. P.S. I did not install...
  23. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    Thank you for updating to v6.9. I updated from v6.8 to v6.9 by OTA, successfully. The battery drain is gone on v6.9. But it remains hanging up with bluetooth LDAC connections.
  24. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I used standard TWRP 3.3.1 until a few days ago, but now I am using standard TWRP 3.4.0.
  25. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I resized by hands with parted and gdisk. # fdisk -l /dev/block/mmcblk0 ..[snip].. Number Start (sector) End (sector) Size Code Name ..[snip].. 25 376832 2473983 1024M 0700 system 26 2473984 2535423 30.0M 0700 crypto 27...
  26. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    Thank you very good information. I reinstalled crDroid v6.8 and opengapps nano 20200714 with clean flash. It's working well face unlock and front camera. Opengapps stock use com.google.android.GoogleCamera and opengapps nano use lineage os's camera. I think if I installed opengapps stock...
  27. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I reinstalled v6.8 and open_gapps-arm-10.0-stock-20200714 with clean flash. Camera(com.google.android.GoogleCamera) works while first set up of face unlock, but doesn't work after compeletion of set up. Other camera apps are work but front camera doesn't work.
  28. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I can't use camera, too. As I didn't use camera nor face unlock, I didn't notice this bug.
  29. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I updated from v6.7 to v6.8 with dirty flash with TWRP 3.3.1 ( non HH version) successfully as I have 3gb system partition (that was partitioned by hand ago). Opengapps stock 20200710 was dirty flashed, too.
  30. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    The reason was found that I installed 'magisk and edxposed' that led to work there apps. It seems that the 'device personalization services' was not concerned.
  31. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    It has problem for bluetooth LDAC codec. It hangs after it connected with LDAC mode. It is ok when AAC mode. I updated with dirty flashed.
  32. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I updated zenfone max pro m2 to v6.8 and it remains magisk-hide working fine.
  33. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    Thank you for crDroid v6.8. It works good.
  34. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I think magisk-hide may need some update. Boot animation is the same as v6.7. I.e. it is slow while first 2 minutes from bootup, and it turns off screen automatically. After power on again, it is normal speed and shows lock screen after about 1 minute.
  35. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    I updated to crDroid v6.8. Almost everything is good but magisk hide is not working.
  36. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    Gmail for non google account and amazon appstore work fine on crDroid v6.7, today. I don't know why. Perhaps, because 'device personalization services' was updated yesterday.
  37. I

    Post [ROM][11.0][OFFICIAL] crDroid Android v7.10 [hammerhead]

    Thank you for updating to crDroid 6.7. I feel this is very stable. I'm using open_gapps stock with 3gb system partition resized by hand with parted and gdisk.
  38. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    And amazon appstore crashes on crDroid v6.7.
  39. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    When I read/write emails other than google account with the gmail app on crDroid v6.7, I'm having trouble that gmail app crashes. I don't know which is worse, the gmail app or crDroid v6.7.
  40. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    I updated to v6.7 (crDroidAndroid-10.0-20200610-X01BD-v6.7) with dirty flash. It works NFC, I can read pasmo ( that is a rechargeable contactless smart card, electronic money system in Tokyo, Japan). And LDAC/aptX HD/AAC is working with sony WI-1000XM2/WH-CH700N/WI-C310. Thank you for good job...
  41. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    I found that NFC is not usable and aptX/aptX HD codecs are not working with SONY WH-CH700N headphones. Again, I clean installed crDroidAndroid-10.0-20200513-X01BD-v6.6 and open_gapps-arm64-10.0-stock-20200529, this problem was not unchanged.
  42. I

    Post [ROM][10][OFFICIAL] crDroid v6.12 [X01BD]

    I installed crDroidAndroid-10.0-20200513-X01BD-v6.6 and open_gapps-arm64-10.0-stock-20200527, today. Although the stock rom (android 9, WW-16.2017.2004.075 ) cannot use LDAC codec for bluetooth, this rom works fine at LDAC codec with SONY WI-1000XM2 bluetooth earphones. I'm very happy, thank you.
  43. I

    Post [ROM: LineageOS 14.1 -x86] Android Nougat for PCs

    I installed lineage x86 to dell vostro laptop and vostro desktop machines. They are almost good working but I have three issues. (1) Although I want to set RTC(real time clock) to UTC, lineages are overwriting RTC to localtime. (2) I want to assign ip address statically to ethernet, but l must...
  44. I

    Post [ROM][unOFFICIAL] LineageOS 14.1 for Nexus 5 (hammerhead)

    With the clean installation, lineage-14.1-20171122-nightly-hammerhead works well both WiFi (EAP-TLS authentication) and active sync mail.
  45. I

    Post [ROM][unOFFICIAL] LineageOS 14.1 for Nexus 5 (hammerhead)

    Thank you for good information. My nexus was updated by ota and so this was dirty flash. I'll try to clean installation tomorrow (I have no time today).
  46. I

    Post [ROM][unOFFICIAL] LineageOS 14.1 for Nexus 5 (hammerhead)

    And more over, lineage-14.1-20171122-nightly-hammerhead can not connect exchange mail (active sync) server via WiFi(password authentication)/LTE. lineage-14.1-20171107-nightly-hammerhead is good working for active sync server.
  47. I

    Post [ROM][unOFFICIAL] LineageOS 14.1 for Nexus 5 (hammerhead)

    I tested again and found that EAP-TLS authentication (which is my configuration) is not working but password authentication (which is for this test) is working.
  48. I

    Post [ROM][unOFFICIAL] LineageOS 14.1 for Nexus 5 (hammerhead)

    After updating to lineage-14.1-20171122-nightly-hammerhead via OTA, I can't connect to WiFi. I reverted to lineage-14.1-20171107-nightly-hammerhead, WiFi connection has come back again.
  49. I

    Post [rom] [jem] crDroid (unofficial) (Nougat)

    Thank you for update include KRACKs patch. I'm very happy. I try to durty flash, but it is not success. Wi-Fi can not connect. Then I did factory reset and flash crDroidAndroid-7.1.2-20171018-jem-v3.8.zip and open_gapps-arm-7.1-pico-20171022.zip, it works fine.
  50. I

    Post [rom] [jem] crDroid (unofficial) (Nougat)

    Thank you for 2 steps installation I can install crDroidAndroid-7.1.2-20170827-jem-v3.7 with 2 steps installation. It operates very well. Thank you very much.