• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Search results

  1. 123SIT

    Post Need help fixing an issue with magisk and edxposed causing a bootloop in Android 11

    Give this a try: https://forum.xda-developers.com/showthread.php?p=83471367 Sent from my Pixel 4 XL using Tapatalk
  2. 123SIT

    Post [Guide] Magisk Modules Disabler for booting into Magisk core-only Mode

    Sooo, I was in the same boat as you were with forgetting to disable my modules before upgrading. I tried adb wait-for-device shell magisk --remove-modules and booting images that had the overlay.d adding in to disable Magisk but none of those things worked and I just figured I'd be without root...
  3. 123SIT

    Post Android 11 Release

    Appreciate it. I mainly wanted to confirm my patching was successful and based on the hashes of both our files it was. I guess I have a module acting up that's causing my bootloop and adb wait-for-device shell magisk --remove-modules was unsuccessful in removing modules. Need one of these...
  4. 123SIT

    Post Android 11 Release

    Someone wanna post their working patched boot.img? Much obliged. Sent from my Pixel 4 XL using Tapatalk
  5. 123SIT

    Post [Kernel][05.08.2021][4.9.278] Kirisakura_R 3.1.0 for Pixel 3/XL aka Bluecross

    Working fine here. Sent from my Pixel 3 XL using Tapatalk
  6. 123SIT

    Post [Kernel][05.08.2021][4.9.278] Kirisakura_R 3.1.0 for Pixel 3/XL aka Bluecross

    All good here. Multiple charge sessions and no reboots. Sent from my Pixel 3 XL using Tapatalk
  7. 123SIT

    Post [Kernel][05.08.2021][4.9.278] Kirisakura_R 3.1.0 for Pixel 3/XL aka Bluecross

    TWRP 3.3.1-2 flashed it with no issues and it boots fine. EXKM didn't fair so well, image attached. Appreciate you. Sent from my Pixel 3 XL using Tapatalk
  8. 123SIT

    Post [Kernel][05.08.2021][4.9.278] Kirisakura_R 3.1.0 for Pixel 3/XL aka Bluecross

    3.1.3 appears to be working fine on June update, booted with no issues.
  9. 123SIT

    Post TWRP 3.2.3-1 for Pixel 3 XL

    3.3.1-1 works on June update, upgraded from May, "-w" removed from flash-all.sh.
  10. 123SIT

    Post [Kernel][05.08.2021][4.9.278] Kirisakura_R 3.1.0 for Pixel 3/XL aka Bluecross

    Went in to take my final this morning, left phone in car, came back out after and phone froze then rebooted. Pstore folder in link below. https://www.dropbox.com/s/y0bpa71h4i9a18h/pstore.zip?dl=0 Sent from my Pixel 3 XL using Tapatalk
  11. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    I appreciate that and I normally keep the previous version in case of situations like this. Haven't heard any others with the issue so I'll correlate it to being me and my phone lol. Sent from my Pixel 3 XL using Tapatalk
  12. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    I got an update those morning to 19002, I think it mentioned Q in the changes but I'm still on P so didn't pay that much attention. Sent from my Pixel 3 XL using Tapatalk
  13. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    Very weird indeed. The complete zip from 3/12 works fine for me and if you're referring to the twrp vibration bug, it was fixed in 3.2.5 [emoji106] Sent from my Pixel 3 XL using Tapatalk
  14. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    Same result, log here: https://pastebin.com/Znhqs4db Sent from my Pixel 3 XL using Tapatalk
  15. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    Four files present, think that may have been the issue? Sent from my Pixel 3 XL using Tapatalk
  16. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    Canary 19002, but the normal system based install didn't work either. Let me try again just to make sure. Edit: I used the complete install from a previous release and it worked, could be a bad extraction on my side. I'm going to download the entire zip again and compare md5 to see if that's...
  17. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    Sysuirightclockoverwifi, fwgrayqs, rightoverwificlocksmallampm, trafficspeedsinglerightoverclock, whitecirclebattery, smalllte. Sent from my Pixel 3 XL using Tapatalk
  18. 123SIT

    Post Tulsadiver Mods - Android 11 and 12 ADB Installer-Zip Installer, creates magisk module

    Both the system complete install and magisk complete install fail with error 127(I think this was the error number if I recall correctly). Sent from my Pixel 3 XL using Tapatalk
  19. 123SIT

    Post [CLOSED][DEV] Magisk Canary Channel - Bleeding Edge Builds

    Np, went through the same thing earlier today. Sent from my Pixel 3 XL using Tapatalk
  20. 123SIT

    Post [CLOSED][DEV] Magisk Canary Channel - Bleeding Edge Builds

    If you go to the magisk_files repo on GH and click commits, you can get to previous versions. View canary.json to see which version corresponds to each commit. https://github.com/topjohnwu/magisk_files/blob/529d1434f4e5bab5ce4b6669df9996d889b3ba29/canary_builds/magisk-debug.zip Sent from my...
  21. 123SIT

    Post Black boot animation

    Good catch, the change in proton was made after v7 in an interim release and included in v8. Sent from my Pixel 3 XL using Tapatalk
  22. 123SIT

    Post Black boot animation

    Never has for me and I've done it in previous phones as well. Sent from my Pixel 3 XL using Tapatalk
  23. 123SIT

    Post Black boot animation

    I used root explorer, navigate to /system/product/media, paste in bootanimation.zip, should prompt that it's read only, change to rw, paste, change permissions to 755. You still get the white bootloader screen for a few seconds but then it switches after. Sent from my Pixel 3 XL using Tapatalk
  24. 123SIT

    Post Black boot animation

    Proton kernel allows R/W on product, which allows the boot animation to be changed.
  25. 123SIT

    Post Android 10-Various Mods-Zip installer-creates Magisk module.

    Seems to be a lock screen unlock delay from sleep. Could someone else chime in on it please and thank you. Sent from my Pixel 2 XL using Tapatalk
  26. 123SIT

    Post [DEPRECATED] Greenify4Magisk [v4.5.1]

    Not sure what you would like for me to test but apps are hibernating and phone didn't boot loop... Sent from my Pixel 2 XL using Tapatalk
  27. 123SIT

    Post [DEPRECATED] Greenify4Magisk [v4.5.1]

    Works for me on pixel 2xl and pie. Sent from my Pixel 2 XL using Tapatalk
  28. 123SIT

    Post [MAGISK 16][Battery Saver][6.0+] ENABLE DOZE on Google Play Services

    Here you go: Original Oreo google.xml https://www.dropbox.com/s/k7q3g0rx9uyumza/google.xml?dl=0 and I made the below Magisk module for myself but figured others might enjoy it :) EnableGMSDoze for Oreo https://www.dropbox.com/s/562drx7q1uenf57/EnableGMSDoze_Oreo_Magiskv15.zip?dl=0
  29. 123SIT

    Post Git Clone and Building Magisk is failing

    Just for future reference, after you did the initial clone you could have ran to pull in missing the externals: git submodule update —init —recursive Sent from my Pixel 2 XL using Tapatalk
  30. 123SIT

    Post [KERNEL]Despair Kernel

    12 had some issues and was pulled, run 11 in the interim.
  31. 123SIT

    Post [KERNEL][8.1] Electron Kernel for Taimen [v4][Discontinued]

    Ah yes, feed my flashing hunger muhahahaha!!! Install of kernel and module went without issues. I have noticed the following repeated in logcat but I had to run out for a few so only posting the error until I return home. Every 10-15 lines in logcat contains the below at least once. 11-14...
  32. 123SIT

    Post [UPDATED][2017.11.6][Magisk] Root Pixel 2 (XL)

    You want the boot.img my friend, not the system.img :)
  33. 123SIT

    Post [KERNEL]Despair Kernel

    Patch either of these with Magisk Manager from topjohnwu thread, pull patched_boot.img from phone, fastboot flash boot patched_boot.img to phone. If you don't want root just fastboot them as they are. Based off stock November boot.img with snoke R11 zimage repacked. Snoke R11 SE Enforcing...
  34. 123SIT

    Post Pixel 2/Pixel 2 XL Support

    I'm working with some of the other guys on the Pixel 2 XL and would love to chat if you have about 5 minutes. I'm adding some logging into magiskinit.c to write to a log file so we can see why and exactly where we are boot looping, but I'm not really sure what's mounted at the time magiskinit...
  35. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    Awesome, now that's what I'm talking about. Ok so I assume the videos are showing delay when the module is enabled. The xposed log didn't show anything related to InstallerOpt except the very first init where it get's some preferences and shows a little information but other than that nothing...
  36. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    If you are having any issues, I need to know what rom you are using and need a logcat/xposed log(with debug in the module enable) otherwise go ahead and uninstall as your issues will never get resolved. It hurts me to say that but just telling me you are having issues will not help resolve...
  37. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    OP and repo updated with new version: 1.0.10.53 Changes: - Fixed issue that may cause notification to not show - Force English in module will also use English for version info when installing
  38. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    I'll have a look regarding the first statement but thank you for the second one, oversight on my part. Have it fixed in a few.
  39. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    OP and repo updated with newest version: 1.0.10.44 Changes: - Optimized retrieving preferences from content provider - Fixed display issue with toast if you weren't showing both version and version code - Reworked restore backup process logic to be more seamless - Reworked the way the master...
  40. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    Enable debug in module and get me the xposed log and/or logcat please and thank you.
  41. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    If you can provide them they are always welcome :)
  42. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    Pretty sure I've found the issue causing the spontaneous reboots, just need to work out the best way to resolve it. Stay tuned...
  43. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    Greatly appreciated, others who are having reboots are encouraged to try that version as well and report back with any issues.
  44. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    Try this one and make sure all is still well if you don't mind: https://www.dropbox.com/s/sud3auwdoa4jh07/net.fypm.InstallerOpt1.0.10%20%2810%29-release.apk?dl=0
  45. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    Nope lol, which version were you using that was causing reboots? 1.0.10.2 or 1.0.10.3?
  46. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    I know it's frustrating when your phone boot loops or spontaneously reboots and I assure you that I was not experiencing those things prior to releasing this version. I like to think that I do plenty of testing before releasing but with the fragmentation of Android and diverse differences...
  47. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    I'm sorry you are having issues. If the other features aren't enabled they won't be utilized. Most of the changes I've made have been on the backup manager while most of the core functionality has remained the same. If there is any way you can provide a log so I can fix this please do...
  48. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    You're gonna need a computer with adb available. Connect your phone, run: (To see and save) adb logcat -v time | tee logcat.txt Or (To save only) adb logcat -v time > logcat.txt You should see your phone logs on your computer now(if you used the first command) and they are being saved to...
  49. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    A log would be awesome if you can get one.
  50. 123SIT

    Post [MOD][XPOSED][v1.0.10.53] InstallerOpt

    OP and repo updated with latest version: 1.0.10.3 Lots of changes in lots of places, check https://github.com/afxefx/InstallerOpt/commits/master for all the details Changes: - Fix crashes due to not handling screen rotation correctly - Master switch to disable all features without having to...