• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Search results

  1. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    The m3 core is effectively 6 instructions wide. Yes it has 12 pipelines, but it can only feed 6 per cycle. At that rate, your memory bandwidth requirements just to feed a single m3 core fully is 4bytes per instruction x 6 pipelines x 1800 mhz = 43 GB of bandwidth. Additional clock speed is...
  2. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    lol...ykk.. you are indeed correct. technoob...which kernel was this? and did they actually put in correct voltages for those speeds? if they just said eff it and did max voltage then you'd definitely run into temp issues. it would be crazy if they did it with the joke of a stock voltage...
  3. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    i'm finally back..haha..life has been kicking my ass...glad to see others picking up and chiming in. As with regards to the gpu, this thing _SHOULD_ in theory be able to get into the 800+ mhz range as arm was touting 850 mhz on an older process for this gpu design. YKK knows my thoughts...
  4. O

    Post [KERNEL][TWRP][TW][G/N96XX][Q] / [LOS17] White Wolf Kernel (01/03/2021)

    I'm running this on a note 9...and no matter what I do I can't get synapse to work. It keeps complaining about uci and uci doesn't seem to be in the terminal.
  5. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    Looking forward this. I wonder what other bugs we're going to find in this hot mess that samsung put out (pun intended).
  6. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    absolutely correct....there's a further benefit to that curve which is the mif. the above frequency curve literally gives you every option for scaling at pretty much the ideal power cost. I really do think the mif is an underexplored aspect of this cpu.
  7. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    But looking at it some more.....the ideal frequency curve (assuming a properly working governor that literally only fires up the big cores when we need them))....would end up looking like small cores at 455-1053 and the big cores at 1066/1170-1794. This curve would allow a seamless transition...
  8. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    that's looking at the stock table literally as is. samsung literally breaks their curve at a certain point just to say it performs at a certain level. assuming we actually get the voltages we are looking for actually working....i figure 1 - 2 weeks tops for each voltage setting optimized...
  9. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    after looking over the curve a bit...the real intended frequencies or actual ideal frequencies are 1053 for the small cores and 1690/1794 for the large cores.
  10. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    and holy hell this is a screwy factory curve...lol...the top speed has a significantly lower voltage than the next step down.
  11. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    i think i found where to read it! /sys/kernel/debug/opp/cpu4 and /sys/kernel/debug/opp/cpu0. There's a bunch of of u_volt entries there. I'm assuming it just assign to the first core of each cluster and the others follow
  12. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    if you figure out how to read any of the voltages...I think I can figure out how the pin setting works. It should be simple math to figure out how it's actually controlled. And I'd guinea pig on myself once we're able to try it.
  13. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    give me the commands for the gpu voltage ...i'm still on the note 4 for now...i'll come up with a table brute forced to mine..and we can start some testing there. i think they're gone because fewer devs and fewer people that know wtf they're talking about are around to test and debug these...
  14. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    so it looks like the voltages DO work even with speed changes. I'm surprised mine will max out the undervolt slider. According to my asv table mif:7 int:7 cl0:10 cl1:8 g3d:6 But yea..i'm familiar with binning..I did all my previous undervolts based on the pvs bin table for snapdragon...
  15. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    the bug i mentioned before where you change the frequency sliders go poof....it exists in two other kernels...so i'm thinking it's the app. that being said...i'm not sure it's working properly as my phone can completely do the lowest global voltage slider no problem...i'd be surprised if i got...
  16. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    It seems the voltage bug exists on the other kernels that support it. I wonder if it's a bug in the kernel managers since they're modified ports. It's really a shame the dev community thinned out so bad. That being said...yea..there's definitely a lot of potential, but man..this is gonna...
  17. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    good to know...I hadn't seen a selinux thing do that before.. I'll be looking forward to helping make this damn phone what it should have really been from the factory *rolls eyes at samsung*
  18. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    squashing the kernel manager bug might prove more than useful if that the plan. We know the damn thing isn't tuned for power. Getting a proper safe power scaling curve for this thing that a variety of people can have input on easily is going to be be a big help both performance and...
  19. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    I'll explain the bug i found with the cpu clock speeds I've found...it's not tied to your kernel at all. If you look at the exynos9810.dtsi file...it shows the clock domains for both the cpu and the memory memory interface controller (MIF) The same clocks are listed in gpu dvfs table in...
  20. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    I just know I haven't saved a profile yet on the phone. I know you make the change in the app..leave and come back in...sliders go poof. It would take somebody who has coded a kernel manager type app to give any more insight. I just do know I've been able to explicitly replicate this one on...
  21. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    oneui / android 10.. and there's definitely something bugged about the kernel. using an app i could not adjust the voltages at all via the slider on mtweaks or thundertweaks....that corrected itself once i did a wipe and reinstall of the alexisrom and the kernel. I haven't been able to...
  22. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    it's not an undervolt issue. I found the issue on other kernels. I just tried yours a few hours ago and yours seems to be the only one that works with newer stuff and has any type of undervolt. I only underclocked. It seems to be how the clock domains work on this thing. BTW, I can't...
  23. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    Have you verified that the undervolt is actually working? I'll start testing it myself on how the other things interact. I've always run my phone slower than stock...and I can already reproduce some really weird glitches just via forcing certain frequency combinations. I think I'm getting...
  24. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    i did find those. and it's not only 800 max...it's 800 across the board stock. it's the cpu voltages i've not seen any sign beyond andrei's article on the note 9 on anandtech. thanks for your responses.
  25. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    between the change in the bootloader....the change in scheduler behavior....and ALSO going having these phones with multiple core types....the learning curve is beyond steep. I used to keep a spare note 4 for parts...I might get a spare n960f if this picks up. I saw the gpu voltages...
  26. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    and i read your comment in freeza's original thread...long time lurker...but i'm also in your boat...having to replace my sprint note 4...and went this route....man so much has changed. I think _A LOT_ can be gained by having a proper kernel. I'm more than willing to be a guinea pig if you...
  27. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    correct...i'm looking for what the cpus/gpu will request for voltage.
  28. O

    Post CPU, GPU binning

    does anybody know where to actually find the voltages for the various bins?
  29. O

    Post [Kernel | Android 10 | One UI 2.5 | FUF5/FUH1] BeastMode Kernel v2 for N960F | v2.11c6 | 20210920

    since i can't seem to find it anywhere else...would you happen to know where i can see the stock voltage table for all of the cpus and gpu?
  30. O

    Post [Kernel] BeastMode Rage r56 (Marshmallow PE2 based)

    Just out of curiousity... anybody have any idea why my lernel adiutor settings get overridden everytime i seitch the screen off and on?
  31. O

    Post [Kernel][STOCK/PORT][N910P] [08-25-17] DtuxKernel W07F - 710N - DR4G0N v2.8 (EOL)

    anyways...i'll sporadically try your kernels as you build them. if one of them breaks the phone/wifi ...i'll post again and we'll figure out what logs you want/need. thanks again.
  32. O

    Post [Kernel][STOCK/PORT][N910P] [08-25-17] DtuxKernel W07F - 710N - DR4G0N v2.8 (EOL)

    also...why bother with aroma on a kernel?....there should only be a handful of builds period....and aroma doesn't work properly on quite a few builds of twrp. it's already a big undertaking trying to build and solve issues on a kernel....don't be too ambitious.
  33. O

    Post [Kernel][STOCK/PORT][N910P] [08-25-17] DtuxKernel W07F - 710N - DR4G0N v2.8 (EOL)

    ironically dtux rom is too heavy for my liking...it works and is solid...but still the graphics driver bug exists on my phone. it shouldn't be an overheat issue...I'm underclocked and undervolted when it happens...and I've seen it reboot just sitting on an idle launcher screen when the drivers...
  34. O

    Post [Kernel][STOCK/PORT][N910P] [08-25-17] DtuxKernel W07F - 710N - DR4G0N v2.8 (EOL)

    oddly enough....I had ALREADY tried this. I got this phone with pk1 on it.......and then put pe2 (both loader and modems)....now it's on qc1. I've probably reflashed kernels maybe 50 times in the past few days. The behavior is oddly consistent on my phone. I'll be the problem child...
  35. O

    Post [Kernel][STOCK/PORT][N910P] [08-25-17] DtuxKernel W07F - 710N - DR4G0N v2.8 (EOL)

    hey carlos...long time lurker. Thanks for your work. I actually built my own ultra stripped down version of the stock firmware (qc1) and have been testing kernels like mad. My phone seems to reject quite a bit of things. The state of development of kernels is quite sad on the note 4...
  36. O

    Post Hacking the new Nook GlowLight

    I can't for the life of me install a working market/gmail/etc.....any clues/pointers/tips?...I'm definitely rooted and have full adb/launcher access...I just can't figure out where to go from here.
  37. O

    Post [ROM] Chemistry_Rom (1/28/13) "working multiwindow"

    I've always been a forum lurker on every phone I've owned. Your rom is good enough for me to come out of the woodworks just to thank you for your work. If you ever need a helluva tester, hit me up. I learn to break/crack things in very odd fashion (i figured out the baseband bluetooth bug...
  38. O

    Thread bug in bt with cm7.2

    in cm7.2 stable and newer the bluetooth phone stack doesn't work properly. however avrcp(aka id tag streaming) works properly. both of these do work in the RC2 build. I have not tested rc3 as it was a broken link when i tried to dl it.
  39. O

    Post Sprint LTE development halted

    I knew lightsquared was falling apart for a while now...but halting their own lte development is just odd to me....sprint has a huge amount of licensed spectrum...wth are they doing with it?!?!?!
  40. O

    Post Your New Moderator!

    Honestly...as somebody who has used this forum a lot...and many other various forums....we honestly should have a mod that truly understands the phone. Otherwise, the moderators depth of knowledge is lame sauce with an extra side of weakness...just like this burger. I would like to formally...
  41. O

    Post [PSA] Do not accept ota updates! No more s-off for speedy as of right now

    Haha...I don't post often..so you might not even know that I have the same phone..lol
  42. O

    Post [PSA] Do not accept ota updates! No more s-off for speedy as of right now

    lol..you guinea pigged..and gave me the groundwork/info for me coming up with it...it's probably 2/3s me and 1/3 j00...but if i didn't get a good description/understanding of what was going on...i wouldn't have figured it out....so maybe it is 50/50
  43. O

    Post [PSA] Do not accept ota updates! No more s-off for speedy as of right now

    yea.....i've raped hboot of it's all controlling glory again....i'm torn on the process....htc might "fix" it again if it's posted how it's done.
  44. O

    Post New cellular radio 1.08.01.0111, touchscreen firmware flashable zip

    http://www.mediafire.com/?2ocadzq8xf60fjf radios only http://www.mediafire.com/?as90ept0wzawcwl touchpanel only
  45. O

    Post 2.77.651.3 - Bootloader/Root/Discussion

    http://www.mediafire.com/?6awra2u30ry6o9j radios (both of them) and the touchscreen firmwares....confirmed to work on two shifts using eng hboot. just place on the root directory of the sdcard..and reboot into hboot (vol down + power)...it'll pick up.
  46. O

    Post New OTA 1/11/12

    that's good to hear...i wouldn't want to have to guinea pig myself again..lol
  47. O

    Post [Q] CM7 Nighties no longer being developed?

    My understanding is their build bot is very messed up and the amount of work involved to reconfigure it is quite tedious so they're just doing manual builds and will redo the build bot configs once cm9 is close.
  48. O

    Post force hboot to allow downgrades

    it appears you didn't let it finish downgrading...the downgrade is a two flash process....it appears to be a bootloop if you have no idea what's going on...you bailed in the middle of the downgrade, so you'll have to get the 2.3 ruu ...and reupgrade it and then do the entire downgrade process...
  49. O

    Post force hboot to allow downgrades

    Who said anything about complaining? All I did was point out the facts. I'm all about choices and options. That's the whole point of root, is opening up those options. If it bothers YOU, that others are offering another option, why even bother rooting? Knowledge is meant to be...
  50. O

    Post force hboot to allow downgrades

    Intentionally bumping this thread to make a point. The ideas were originally mine and the instructions were written by scaryghoul. It makes no sense that more than two versions of a script to perform a concept is not allowed. And even I'll admit that my idea was borrowed...