• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Search results

  1. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    Yap... For bt.. For some reason Bt service in Android side can't read bt Mac address For camera.. Camera app in ubuntu can't write the image file due to some weird permission issue.. Fingerprint has everything in place but can't enroll it for some reason. (Not sure if it's a hardware issue...
  2. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    Which network did u test on.... Calls seem to work good on Vodafone for me on v4
  3. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    In ut ssh is enabled by default and if u want vnc there may be apps that u can install...
  4. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    I guss that's why kenzo use pre build ril stuff .. It might some time to fix
  5. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    for waydroid - connect kenzo to linux laptop then in PC terminal ssh [email protected] - then execute the patch script one by one (see if any line fails ,else run waydroid logcat ) For audio - try , normal reboot followed by a hard reboot (don't let go of the power button) ( if it works...
  6. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    hy plz try this in terminal ssh [email protected] #fix updated for waydroid 1.2 sudo -s mount -o rw,remount / mount -o rw,remount /var/lib/waydroid/rootfs/vendor cp /system/lib64/libui.so /var/lib/waydroid/rootfs/vendor/lib64/libui.so cp /system/lib64/libbinder.so...
  7. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    t try v4 ,it has some more fixess.busybox things are gone now
  8. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    updated the flashable zip .. thankyou for the fix @Kn8Ryder
  9. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    try a hard reboot(long press power button) .it should work afterwards
  10. M

    Post [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    both flash may end with flash error that not a problem its a busybox compatibility thing.(not relevant )
  11. M

    Thread [Rom] Ubuntu touch [halium 9] with waydroid [10] support

    This is an update to the post that I did a while back which can be found here. That was a port using halium 7. To be fair it was prity old and buggy. This one uses halium 9 (bugs are still plenty though ;-P ), and is a marginal improvement over the previous one.Yet this port was no means easy...
  12. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    waydroid is working on kenzo (halium 9) #waydroid fix sudo mount -o remount,rw / sudo apt update sudo apt install waydroid sudo waydroid init #as phablet user run: #sudo stop waydroid-container #sudo umount -l /home/.waydroid/rootfs #sudo resize2fs #/home/.waydroid/images/vendor.img 1G #sudo...
  13. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    But this does not fix the actual problem ...(assuming it to be some permission being denied by the kernal) ... Also can you check if data calls and audio are working properly...had done fixes for those ....
  14. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    https://www.androidfilehost.com/?fid=7161016148664814914 bro ,try this
  15. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    it will take around 15 to 20 min for the first boot ..due to the issue I mentioned earlier...
  16. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    Connect ur phone to laptop ...do a new wired network show up ...if yes open terminal and connect via ssh To the device using ... ssh [email protected]
  17. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    ssh [email protected] sudo mount -o remount,rw / sudo -i # And enter your password cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,$3,$4,$2}' | sed -e 's/\r//'...
  18. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    https://docs.ubports.com/en/latest/porting/configure_test_fix/Lomiri.html sudo mount -o remount,rw / sudo -i # And enter your password cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\"...
  19. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    download https://gitlab.com/JBBgameich/halium-install/ and unzip download the following 4 files (including flash.sh)and move to the above folder https://ci.ubports.com/job/xenial-hybris-android9-rootfs-arm64/ https://www.androidfilehost.com/?fid=7161016148664801049...
  20. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    boots after a lot of fixes .. still issues with halium7 exist here too mainly rild- > mobile data . (also could not find a pure los source )..if you like to debug i can share an image ..(not at a usable state )
  21. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    still no idea why rild is failing on the android side ..may be some could look in to this !!?
  22. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    seilfish os and ubuntu seem to work differently regarding the problem at hand .. postmarket os wiki was helpful though...
  23. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    hi... ubports recommends downloading updates as full packages instead of going apt update...(may break things )
  24. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    tried it ,didnt work ..thanks for the help:)
  25. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    no point in flashing LOS ..can't properly load the firmware anyway.....i might be able share a flashable zip tomorrow...
  26. M

    Post [Ubuntu touch] [linux] [alpha] for kenzo

    i did add a script for this but it does not seem to work. could you connect the device to a Linux pc and run the following in pc 's terminal ssh [email protected] sudo -i cp /system/etc/wifi/WCNSS_qcom_cfg.ini /data/misc/wifi/WCNSS_qcom_cfg.ini sudo echo 1 > /dev/wcnss_wlan sudo echo...
  27. M

    Thread [Ubuntu touch] [linux] [alpha] for kenzo

    Disclaimer This is an alpha build, a lot of things don't work and cant be used as a primary device..also i am not responsible if your device blows up... Having said that this is working well with good battery life. Back up your current boot image if you would like to multiboot. For easy...
  28. M

    Post [ROM][9.0 - PIE][kenzo] LineageOS 16.0 [UNOFFICIAL][Security Patch Level - June 2020]

    I am planing to port ubuntu touch for redmi note 3.... Found a noobs guide...
  29. M

    Post [ROM][9.0 - PIE][kenzo] LineageOS 16.0 [UNOFFICIAL][Security Patch Level - June 2020]

    Hi can you plese give the link to the sorce code.that you use ....
  30. M

    Post Treble Kenzo

    It could make it possible to run ubuntu toch gsi on redmi note 3......
  31. M

    Post [GSI][arm64][A/AB] Ubuntu Touch (ubports)

    I was asking if someone has comeup with a patch for thisss......bro
  32. M

    Post [GSI][arm64][A/AB] Ubuntu Touch (ubports)

    Not working on device with 8.1 vendor image...will there be any patches??
  33. M

    Post [ROM][GNU/Linux] PostmarketOS

    How to use the terminal... No virtual keyboard
  34. M

    Post Treble Kenzo

    Will there be a pie based vendor image...
  35. M

    Post [GSI][arm64][A/AB] Ubuntu Touch (ubports)

    Hi... I was trying to make a patched kernel for ubports Ubuntu touch GSI. Did everything as per the xda page.. and made the patched kernel.....and flashed it on my phone .but it doesn't boot stuck on boot logo... What could be the problem , what am i missing...how to fix this.... ----------...
  36. M

    Post [Guide][Noobs Familiar]How To Build Android Kernel With Features!

    Hi I was building a kernel for Redmi note 3 and while compiling it's says this "nothing to be done for dtb" And when I try to flash the kernel after repacking with Android kitchen fastboot says. "Remote dtb not found" How do I fix this
  37. M

    Post [GSI][arm64][A/AB] Ubuntu Touch (ubports)

    Can anyone point to a guide for paching kernal with haliam....and is it posible to patch an existing kernal...
  38. M

    Thread new vendor image for kenzo

    Hlo is there a pie 9 based vendor image for redmi note 3
  39. M

    Thread halium patched rom for redmi note 3

    Hlo ... I wondering if there is a halium patched kernal for redmi note 3... If not how do we make one . This would make it possible to run ubuntu touch on this device. ... .. Can anyone point towards a guide to patch and create a halium kernal
  40. M

    Post [ROM][9.0]AospExtended ROM V6.6 [DUI][OFFICIAL]

    But won't restoring old system backup bring back the old rom!!