Search results

That's interesting, cause I got confirmation from a repair store that the displays match. We will see when it arrives (in about 6 weeks)

And because of the full ceramic it's slightly smaller? Alright, thanks alot :)

Hey there, For the first time I broke a smartphone screen, and it's the one from my beloved Mi Mix 2 Special Edition. The problem is I can't find a replacement screen that sais "Mi Mix 2 special edition". I know this phone is an abbreviation of the normal Mi Mix 2, but the outer measurements...

did you also take the white mix 2 from gearbest?^^ atleast that is what i did. let's see if i regret it :D

as far as i understood, you need the king variant for USA

The Phone is now listed on Gearbest, but only as preorder/notice and only 6/64 GB https://www.gearbest.com/mi-mix-2s-_gear/ update: the price dropped from 777$ to 660$ , but still a bit expensive for the 64GB version imho abdurrehman09 : well, "about $650" for the 256GB variant is a bit...

in a german article it was stated that only the "king variant" with 256GB will have the global LTE modem. The article also states that this will only be a downside for the 128GB and 64GB Version if you live outside of Europe...

Hey, i am quite interested in the new Mix 2s, but only if it fits my needs. I know it is very unlikely that the brand new UFS 3.0 technology will be used in this phone, but hope never dies ;) Even if not, is there a guarantee for atleast UFS 2.1 ? Anything less would be disappointing in my...

Anyone can help me with this? I am searching for a New phone and would prefer one with SLC or MLC NAND Flash and with ufs 2.1 or 3.0 standard since i keep my phones for 4+ years.

Could some1 use a terminal and give me the output of cat /proc/scsi/scsi ? Thanks in advance

yeah,the "Auto-pin" function went away due to the Android 5 update. On 4.4 KitKat, it was the same until HTC brought a patch, then the phone did not ask for pin after getting out of the car. I hoped HTC would repatch this after a while again in Android 5 ... but so far nothing happened.

Hi. Yes,rsap still works on Android L,although i lost the menu where i could disable the remote sim access(which i never plan to do anyway). Currently im on Android 5.0.1,unrooted, qualcomm snapdragon MSM8974AB,baseband 1.25.214500021.06G_20.68.4196t.01_F I am using the VW premium fse 3C8 035...

Hey, i think i can give you some input: First of all, the built date of your car is important, because the version of the pfse differs pretty much. Old ones from 2006-2009 only support rSAP,between 2010 and 2013 also hfp(for iphones and stuff) and a2dp (audio streaming), and only the newest ones...

Hello, my every-update-question: Is rsap (Sim access in Bluetooth menu) still available on lollipop? (go to Bluetooth -> Advanced to check) thanks in advance

bought 2014-09-03, received 2014-10-04, so far 1 crack on the bottom left side.

Yep,that also worked on KK. But...what i am missing now(or am i the only one?): When i connect my controller, i lose the wifi connection to my Router,and that is not acceptable. Im sure it wasnt like that on KK.

Gamingmayr and diigibio: I am having the same issue, really laggy,even on "desktop" (switching pages). Did you try HDMI Mirror Mode? It really looks broken to me, every movement makes black and white stripes on my TV (doesnt matter if i interact with the tab or just watch a movie), i didnt have...

Thanks for your reply. Great,gonna update then :)

Hello, since we are to ask questions here,i'll be asking: Could any1 of you, that updated to 4.4.4, look into Settings ->Bluetooth -> Advanced , if the remote Sim Control option is still available? In Germany it looked like this on 4.4.3 : reason is, i won't update if it's gone ... this is...

...for logical reasons:laugh:

I can confirm that rsap is working with firmware 2.22.161.6 in Germany, it works flawless with my Skoda/VW Premium system. Yay @ HTC for that step :)

Wow,where do you come from. Thanks to your post I checked for updates,and found the 4.4.3 update 2.22.161.6 and updated. Seems like this also had rsap within,but I am gonna verify that tomorrow to make sure. Germany btw

Did any1 experience an increase in Battery Perfomance? I'm wondering because i think it got really better. I am using it only frequently (on a short, daily base), but it never hold out that long. Right now I am at 10 days 3 hours with 27% left, usually im charging once a week.

For any1who is interested: rSAP has been confirmed working on the M8, tested with Porsche and Audi rSAP systems. It is important to check the "recovery installation" box, just like for the M7. For more information visit the homepage and forum www.android-rsap.com thanks Lamensis

Yes, there is an active thread with ppl thinking about buying a M8 (like me),but no one that already has + root. Very specific? well, as i said, xda has _millions_ of users, and the rsap profile is not that limited on cars(VW Premium, Audi SAP adapter, Nokia 610/616, Opel, Mercedes SAP...

So much people on xda and no one has the combination rSAP car + HTC One M8 ?

Hello there :D got a few questions. My good old Desire HD is at the edge of its limits, so i am thinking about getting a HTC One M8. I Don't think it has rSAP out of the box (cause htc never had that before),right? So i've seen alot of people asking the same question as me in the android-rsap...

No, it is not a related problem ,and won't fix mine ... aGPS is a totally different story (see wiki: A-GPS additionally uses network resources to locate and use the satellites in poor signal conditions), it uses your mobile internet connection to set your location, and that's where i first...

33 ohms is not much , shouldnt make a difference in the question "works or works not",its rather a question of detail IF it works again. To the Video: As mentioned in other Topics, this App is not a good combination with CM , cause it most likely destroys your GPS. That's the last thing i...

Somehow XDA didnt show me your reply,but thanks for that hint. I opened my device at work and the panel really is broken (no measurable resistance). I built a cable like the others did to "replace" the missing connection,but with a 33 ohm resistor attached to fit your description,but nothing...

figured that the hard way, used the RIL and ALL connections were gone, went back now to the RIL included inside CM10.1 . GPS still not working. i tried the hardware fix (without soldering,cause that wont lead to anything imho,even though im working at a job where good soldering skills are...

im on the last Radio. so that means i def. _need_ the RIL aswell? sounded more like optional to me, but thanks, i will try that.

btw,is there a problem with GPS in the latest build? can't get it back to work (tried some soft- and hardware tricks so far)

oh man i'm so blind, it is right there. Thanks a lot.

Anyone knows how to get rid of the Googe Search Bar on Top? I don't need it and after 2 days of searching the settings i can't find an option.

Unplug the USB cable while the phone is booting.

As i said, i found it in the OP that this is normal^^ About rSAP: i mean this app (https://play.google.com/store/apps/details?id=com.android_rsap.rsap). It comes with an Installer and the app itsself,and worked on JellyBean. For Kitkat,it worked the first 2 days,then after a crash/reboot it...

is it normal that i get only 592MB of RAM displayed? Edit: nvm,found in OP btw: After a random reboot on 0118 i can't get rSAP (Bluetooth Sim Access Profile) back to work, seems to be an incompatibility to KitKat since it worked on JellyBean without problems (not the fault of CM or you Mustaa...

First of all: what is the Q build? wow, now i know why that happened to me, had the same issue,thanks :D My Device: complettely wiped and installed the newest Radio. I'm using the Gapps Standard. My Impressions so far: I started with 20140114. I replaced the Bootanimation.zip with the one from...

Since i had connectivity problems aswell i completelly wiped my device and installed a new radio, and tried the new Cm11... but its really buggy . Every second reboot i get the error message that the media process closed,and that every 5 minutes. Why every second reboot? Cause the device reboots...

Hi, i got some short questions,hoping there is an answer for it here: Info: I'm using CM10.1 Build 20130418 (i know,quite old,but im not a fan of flashing my phone everyday) I am facing some Issues/things that do not work properly,like 1) Sometimes when i turn on Mobile internet (i don't have it...

and all neccessary information regarding the false update of Asus can be found in this thread http://forum.xda-developers.com/showthread.php?t=2586847

chrome doesnt support flash anyways. i gave up on the stock one years ago, cause it doesnt have the functionality or "easy-to-use" capability than all other browsers btw: dolphin used to crash even before i activated flash.

tried that one for the last 5 days since it was recommended by xda in generally , crashed about 20 times so far ...

Turn off your tab. Then hold vol.down and power. Then select wipe (2 times vol.down,then 2 times vol.up).that's it :)

What I did: since my device got recognized on my win7 x64 (as mtp device,with a yellow ! ,but still worked) I used "adb reboot bootloader" (I'm still locked and stock) to get into the boot loader where you have 3 choices: the "RCK" symbol,the android and the wipe symbol. Since android won't...

<-Germany here Edit:

true.wiped now ... flashing 10_26_1_7 atm. All data lost due to _their_ mistake ... and btw: the first time i didnt root an android device almost right out-of-the-box and this happens,... how ironic :D

i was able to get into bootloader via adb. it clearly sais : "WW_epad-10.14.1.28-20130827" this is the above mentioned "wrong" firmware edit: is there a possibility for anyone of you who has the correct one to upload it somewhere? i dont know what i would be missing if i have to wipe

damn why didnt i read this first ... i just pressed "yes, do so" ... and now its stuck at the Asus Inspiring Innovation with the loading circle ... im giving it another 15 minutes before i press some buttons Also not rooted ...