Search results

The FM Radio is not working on the latest firmware? 01.06.2020 I cannot search any station... highwaystar_ru I have found the problem: root 0 0 E iris_radio: Enabling RECV FM fail -19 #define ENODEV is 19 (no such device, aka radio FM) in errno.h Have you deleted some FM Radio...

Is it faster than 20200331 version of Lineage 17.1?

Step-by-step guide for any Lenovo P8 (no matter of OS, because this is a clean flash). 1.1. For stock Android 6.0 devices, you should take into account that LTE does not work in Europe. If, somehow, LTE works, then go to 1.2. Else, you need to flash 8703N via QFIL (chinese firmware) which has...

Because is an update from 9 to 10, the best procedure is to wipe Dalvik, Cache, System, Data partitions 1. Copy the .zip for Lineage 17.1 into the SD-card + openGapps (I have used nano version) 2. Go to recovery TWRP (VOL+ & Power). Wipe Dalvik, Cache,System, Data 3. Install the zips 4. Sign...

Installed Lineage 17.1. It works even better than Android Pie (it's more responsive). Thanks !! The ,,full screen apps" setting has been removed from Android 10? In Pie, I can hide both the status and navigation bar per app (from Settings - Display). On Android 10, I can use just gesture...

The problem with offline charging is not a custom ROM related, but Android Pie. A reboot (or a cycle On-Off) is enough to solve the problem.

Hi all, I've found an issue (but I cannot confirm if it's ROM related or a general Pie problem): Let's say, we are starting a GPS Testing app. At first glance, we can see 33-34-35 sat's (GPS, Glonass, Beidou and 1-2 from Galileo GNSS). TTFF = 1-2s - very good. But, after some seconds /1 min...

I have found some bugs in the latest Lineage 16.0 (20190608): - while the phone is off and is charging, pressing the Power button shows only the "battery icon" without % level. So, we cannot find the level of charging when it's off. - the battery saver mode is not persistent after rebooting the...

Later edit: After trying both Lineage 16.0 and crDroid based on Android Pie, I come with a feedback. There are some problems with Pie (in general, not device-oriented), and some problems with custom ROMs. I will group into general/specific sections. General issues: 1. In both ROMs (and...

I don't know yet if the delayed notifications/SMS/etc. are due to Android Pie itself, or a custom ROM problem... any clues?

Yep, exactly this complaint was stated. Maybe it's a Pie problem (and not from custom ROMs Lineage/crDroid/etc.). Interestingly, the bad performance (lagging in games for example) is not generated by a low-memory/low-device specs. I really think that Pie (as a standalone OS) is not mature...

Thanks for feedback. Reading the russian forum, it seems that the notifications (via SMS/WhatsApp/etc.) are not triggered while the tablet is in sleep-mode. After turning on the screen, all notifications come in cascade (emails, SMS, etc.). Both on crDroid and Lineage (Pie version). I'll try to...

Hi :) Before upgrading to LOS 16 (Pie) - currently I'm on crDroid Android 8.1, (Lenovo P8 - 4G version) I have some questions: 1. Does it still have the problem with the RTC Clock while there is no SIM card/internet connection? (back to default value of 1970 1st Jan after every boot)? 2. How...

What about the date/time issue in LOS?

Oh. Thanks! Stock ROM for LTE version is available? ( those with X at final). Also, does this device have a reset button (a hole which need to be pushed with a needle) if a bootloop occurs?

Hello. I want to buy a Lenovo P8 from Gearbest: https://www.gearbest.com/tablet-pcs/pp_1542868.html?wid=1640583 I have some questions: 1. It comes with Android 6.0 and has a locked bootloader (I think, it can't be unlocked). Can it receive update to oreo (the custom rom from this thread)? 2...

Hello. I want to buy a Lenovo P8 from Gearbest: https://www.gearbest.com/tablet-pcs/pp_1542868.html?wid=1640583 I have some questions: 1. It comes with Android 6.0 and has a locked bootloader (I think, it can't be unlocked). Can it receive update to oreo (the custom rom from this thread)? 2...

up

up

[Porting] CANNOT LINK EXECUTABLE < /system/bin/ file>: cannot locate symbol < ... > Hi. I encountered a problem while trying to port AOSP Extended v. 4.1 (Android 7.1.2, kernel 3.10.65+, MTK 6753) on my device (VOYO Q101, 2GB/32GB, kernel 3.10.65+, MTK 6753). After successfully started the...

[Porting] CANNOT LINK EXECUTABLE < /system/bin/ file>: cannot locate symbol < ... > Hi. I encountered a problem while trying to port AOSP Extended v. 4.1 (Android 7.1.2, kernel 3.10.65+, MTK 6753) on my device (VOYO Q101, 2GB/32GB, kernel 3.10.65+, MTK 6753). After successfully started the...

Hi. I have two OFFICIAL builds for my device: - the first one, 3.10.65+ kernel, with Lollipop 5.1 and - the second one, 3.18.35+ kernel, with Nougat 7.0 1. The first build, has the bootloader locked, and in FastBoot, the volume-UP button doesn't work (for confirming the fastboot oem unlock) 2...

Hi. I have two OFFICIAL builds for my device: - the first one, 3.10.65+ kernel, with Lollipop 5.1 and - the second one, 3.18.35+ kernel, with Nougat 7.0 1. The first build, has the bootloader locked, and in FastBoot, the volume-UP button doesn't work (for confirming the fastboot oem unlock) 2...

Hi. I have two OFFICIAL builds for my device: - the first one, 3.10.65+ kernel, with Lollipop 5.1 and - the second one, 3.18.35+ kernel, with Nougat 7.0 1. The first build, has the bootloader locked, and in FastBoot, the volume-UP button doesn't work (for confirming the fastboot oem unlock) 2...

Hi. I have two OFFICIAL builds for my device: - the first one, 3.10.65+ kernel, with Lollipop 5.1 and - the second one, 3.18.35+ kernel, with Nougat 7.0 1. The first build, has the bootloader locked, and in FastBoot, the volume-UP button doesn't work (for confirming the fastboot oem unlock) 2...

Hi. I have two OFFICIAL builds for my device: - the first one, 3.10.65+ kernel, with Lollipop 5.1 and - the second one, 3.18.35+ kernel, with Nougat 7.0 1. The first build, has the bootloader locked, and in FastBoot, the volume-UP button doesn't work (for confirming the fastboot oem unlock) 2...

Hi. Unfortunately, my Internet stops while uploading the recovery on the app. What can I do? Thanks.

Yep, I always set the raw image as 2684354560 (= 0xA0000000) bytes (original one). File_contexts file used is from boot.img/ramdisk (the only place in whole firmware where I found the file) What do you want to say to "use the correct make_ext4fs" binary? I am using under Linux: ./make_ext4fs...

Hello. I also got the same problem regarding unpacking-repacking the stock system.img. It's a Nougat (7.0), kernel 3.18.35+. So, every tool I've used (on Windows and on Linux too) gives me an output (.img) which is smaller than the original .img. Moreover, the resulted image is unbootable...

Any ideas please?

Hi everyone, Despite the fact that I have just unpacked-repacked the system.img from an Android Nougat build (without any modifications), the system is unbootable after flashing. I have tried several tools (for Windows and Linux, too), dm-verity off (deleted the "verify" tag from /system...

Hi everyone ===== [INFO] Chipset: MTK6753 OS: Android 7.0 Nougat, Kernel 3.18.35+ Device: VOYO Q101, 2GB RAM, 32GB FlashRAM ===== In order to start a porting process, I have just tested maaaany unpacking-repacking system.img tools. Including simg2img (in Linux), and other Windows versions...

Hello my friends. I have some fresh news after testing 3 firmwares available for VOYO Q101. Maybe this post will be verbose but I hope that this info will help somebody :). I also have made a full partion format (losing IMEI) just to see whether it's easy recoverable. And yes, it is. 1. VOYO...

Up?

Any ideas?

Hello. I want to report on all technical forums, an issue that I have encountered in MTK6753. It's about the GPS module of the chipset in some navi apps. I own a VOYO Q101 Phablet (chipset MTK6753, 2GB RAM, 32GB Flash-Memory), with Android 7.0. Despite the fact that the chipset model is...

Can confirm again: flashing several times the 7.0 ROM, then back to 6 (5.1 in fact), then back to 7 ... without any problems with IMEI. I got some GPS problems ... in some online apps. But I think that this is due to the firmware/hardware, not from flashing ROMs. BTW, have anyone encountered...

Hmm it's strange because I also have not problems with offline navi (I've tried iGO Nextgen). I saw this in the last days .... Have you tried with an online navi (Waze) ? I always have problems with Waze. If you want to try, immediately after "clicking" on Waze icon, drop down the notification...

No no, you don't understand. GPS Locker shows all sats (in our case: GPS + GLONASS). So, after getting a lock, we know the no. of sats used to get the location. The problem occurs when entering in an app. Any app (I have seen these days). Even if it's a navi app (Waze, Google Maps), or another...

Up

Hello. I want to report on all technical forums, an issue that I have encountered in MTK6753. It's about the GPS module of the chipset in some navi apps. I own a VOYO Q101 Phablet (chipset MTK6753, 2GB RAM, 32GB Flash-Memory), with Android 7.0. Despite the fact that the chipset model is...

starbright_ Sorry for the delay. I haven't changed my battery yet .... but I encountered a problem with the GPS. I will detail. About your IMEI problem - you should never use format option (in SPFT) in order to flash a ROM. Instead, use firmware upgrade. I always use this option when I want a...

Nope. Any settings in Dev-Ops - ON. But always 0% (here). Showing the GPU Load - ON, but it doesn't seem to show a load ... Force GPU rendering ... ON Force OpenGL ... ON, etc. So I am not sure if the GPU is working, but the CPU-Z doesn't show that, or the GPU isn't really working.

It's true. But it's not ok to have GPU load 0% every time. Sometimes maybe it's a must to use the GPU.... (games, FHD videos). Try to run in parallel a FHD video + a CPU load worker: idk ...let's say browsing. You will lose performance in both tasks because, normally, the GPU should render the...

This is the problem! For me, after updating to Android 7.0, I have always GPU load 0%. So every graphic entity is created via CPU..... I want to ask you guys if you have this problem too. Run separately a movie, game,etc and CPU-Z. What is your GPU load? Also, please mention if you have the...

I think I'll try to buy another battery (10-15$ it's okay). I'll lose the warranty, but I'm in the second year, so .... Now I am using in the 100-40% interval (with a little help from the Voltage level). More important (for me), is the update to Android 8.0 (according to the manufacturer, as I...

Hello. starbright_ Firstly, you need to install the framework. For obtaining a readable xml file, I am using APKTOOL or APK Easy Tool. Power_profile file isn't good at any chinese provider... They are "same" because it's the default file (posted by the Android Team!). This file should be...

Have you ever tried to flash VOYO I8 MAX firmware (Android 7.1) to a VOYO Q101? http://en.myvoyo.com/xiazai/V%5Ftablets%5Fseries/i8%5FMax/down/ martinza , you stated in your footer that you have VOYO Q101 - Android 7.1. There is no official Android 7.1 for Q101, that's why I am asking if you...

Sure

Back :) 1. Q101 Framework Android 7.0, from VOYO's website is the real (not fake) Android Nougat. 2. It is flashable very easy with SPFT, but use firmware upgrade mode (do not format all partitions as you will lose NVRAM, you need to restore IMEIs etc.) 3. I never use TWRP. Because, after...