Search results

How is the layout in blinkfeed? No black bars on top and below? Because of the s8 screen ratio? I've installed the sense home apk a few weeks ago and there I had those black bars.

Guys, I need some help I think. I've first dirty flashed 1.2 (on top of 1.1) and was stuck at samsung splash screen. So I reflashed with full wipe, still stuck at Splash screen. Reflashed 1.1 and still stuck at splash screen. I can go into twrp recovery with no problems.. Do you guys have any...

I have a s6 edge running alexis custom rom and I do have the latest Oculus software an drivers. All is still working fine. If you need more info let me know! Cheers.

Guys, I do not have a Gear VR but I use a developer board with the same sensors. After flashing Oculus DK1 firmware onto the board I can play Gear VR stuff in developer mode. Works great. Yesterday I was messing about and as I mis the touchpad input sometimes I need to take my Phone out of the...

If you install the open rift dk1 drivers in windows.. your pc will see it as dk1.. Some dk1 apps need the display too but most work just fine.. Great you have things working!

What happens if you go i to gear vr service and set dev mode on and connect the board? And then launch a gear vr app?

Did you do the firmware update? Did that work?

I have found a windows flash instruction to flash Foculus rift on youtube. They guy starts with a firmware update, and then flashes the foculus rift firmware. check it here: (at 7:00 minutes!) https://www.youtube.com/watch?v=17pzEGNfmWA

Yes all 3 jumpers are set. Goodluck hope it works!

From reddit: Hey tomcat. This board is great! Pretty much perfect tracking as it uses the same sensors that the DK1 has. It's super cheap too. I got mine from digi-key.ca for $20 http://www.digikey.ca/product-detail/en/STM32F3DISCOVERY/497-13192-ND/3522185 There is also the American version for...

I think with virtualbox or vmware you make things extra complicated. Just grab a 4 gb usb stick, install linux with https://UNetbootin.github.io Make sure you reserve some space during installation so you can install stuff and save settings in linux.

In the video the guy flashes other firmware to the board but the procedure should be the same. And yes low persistence is working, I must put the gear VR service into dev mode otherwise things do not work.

No need to, someone did it for you :) just make sure you select the foculus firmware.. https://www.youtube.com/watch?v=RrkbMUyrVUw And a link to the ST website, here you can find a windows flash tool. http://www.st.com/web/en/catalog/tools/PF254044 But why not download a bootable USB version of...

Please can you update your mod to work with 6.0.1?

Check here: http://forum.xda-developers.com/mobile-vr/gear-vr/samsung-vr-apps-generic-vr-vr-box-vr-t3287848 And my YouTube vid that show the whole thing working: https://www.youtube.com/watch?v=17pzEGNfmWA By the way I use a Zeiss VR one and with a controller and the Gyro board all works. Some...

Thanks for this rom, I've flashed it on the phone of a friend. I first unlocked the bootloader and then rooted the phone, deleted some bloatware but went a little to far.. nothing worked like it should. Could not hard reset the phone after that.. SO flashed TWRP and flashed your rom! You saved...

Yes it is normal that the screen gets a little dim and flickers a bit Low persistance mode they call it and should make blur in fast pace action a thing of the past. I have a greenthrottle controller, but I'm thinking of getting the one that is recommended by samsung for gear vr, the steelseries...

Cool that you have it working!! I enable dev mode too then I just open Oculus home go into Library and just press launch on something that is installed. Then oculus home starts and I select what I want to play. How smooth headtracking works with the gyros of the STM32f3 board, much better then...

I used Linux mint 17 64 bit But check the video I posted in my post above (just updated) that is a windows flash guide!

Too bad you are a windows guy but if I managed to flash under windows so will you! Yes in the windows link there is the tool to flash under windows (do not forget to flush the datablocks that is talked about in the Linux "how to" (erase_sector 0 0 127) And yes the firmware is the .elf file Do...

Hi Kayo90, that's quick!! I hope you are a Linux guy, start with "how to flash" TXT file I have flashed the board once in windows and once in Linux, In windows was a long time ago, but I think it was just as simple as using the flash util form ST homepage. I flushed the data blocks as is in...

Sure you can!

Yes I use a bluethooth controller, the only "limitation" is the gyro refresh rate this is 200hz while the gear vr runs at 1000hz. However I do not notice any lag in head tracking it runs butter smooth. And if you have a gtx video card you can take it a step further and install the foculus rift (...

Yes the gyros are the same as in the rift DK1, a guy found out that the gear vr uses the same gyros. As you can see in the video it works great: https://youtu.be/3m_zDxdiqAI http://www.roadtovr.com/can-now-clone-gear-vr-test-virtual-reality-apps/

Get a STM32F3discovery board on ebay for 25$ Flash open rift firmware to the board. Connect the board with a usb hostcable and you are done. I have done this with a zeiss vr one. The gyros on the board give me much better tracking then in cardboard apps.

I don't think so but what you can do (I've done this and works great) is get a stm32f3discovery board for about 25$ on ebay. Then flash the open gear vr firmware and you are good to go. And if you connect the board to a pc and install the open source foculus rift drivers and you have a gtx...

You must turn development mode on. In android go to settings, apps, app manager, gear vr service. There tab the version a few times. If you have placed you signature file correctly you will see you are a developer. Then in gear vr service you now have a switch for developer mode. Turn it on and...

nevermind I've got it all working.. in developer mode I can start oculus home and the ST32f3 board works great. I have head tracking!!

I have the developerboard and flashed the open rift firmware on it. My pc detects it as a rift dk1. When I connect the board to my fone with a hist cable the board lights up nicely. But I am unable to get oculus home running without a gearvr. (The chip on the board is the same as in the dk1 and...

04K71586FU912043A 10$ for all the hard work!

Please share!!!

Non of the edge functions are lost, I see the "people pull tab", the colored people light when you get a call, and night clock are all working. I installed apps bar and that too works. I came from a HTC one M7 and Blinkfeed was the one thing that made me reluctant to leave HTC but now... I have...

Thanks! I love HTC Sense!!

Okay I got a little further: I found that in data/data/net.sourceforge.opencamera/net.sourceforge.opencamer_preferences.xml There is a line where I can set focus on video, however net.sourceforge.opencamer_preferences.xml keeps changing back to continuous forus. The string...

love this app, great options but.. Is there a way of saving the video settings, like I want to use infinity focus and save that so that when I start the camera it will always be on infinity focus. Even if I lock my phone and let open camera bypass my lock screen focus is back to normal. Does...

For me with onkyo app I can play music just fine.

I tested the zoe feature, and of Works just a little different. Press the zoe button, you make one photo. Press it longer (less then 4sec) and you get a zoe like we are used to. Press the button longer then 4 sec you see locked. Press again to stop recording. Then in gallery, open the zoe clip...

This firmware did not erase anything for me. (hboot 1.55 rumrunner s-off) Works like a charm!

Thanks!

hboot 1.55 Guy´s a question I did search and I think the answer is yes but before I proceed I want to make sure. I have a M7UL with hboot 1.55 unlocked and s-off. Is it save to flash the latest dark bootloader? Thanks!

I can't findout the unlock method either. Is there no one the knows how it is done? I can't imagine the installer unlocking via htcdev, how many phonez can you unlock on one account? And don't you think HTC would found out and block the installer unlocker?

I have the same, but solved it flashing the latest TWRP (2.6.3.3.)

Thank you!

Yeah tell us more!!

I agree with you on this.. You might just ask LlabTooFeR.. I hope he does not mind.. more developers are better!!

I'll keep my eyes open. Thanks for the info.

Thanks for the quick reply!! Hope to see an Updated version soon (however I do not use Facebook, or any other social media) The three day "do not use my base" are gone ;) so will you make a new thread with your rom? Or is this yours...

Hi Magpir, I would like to know a little more about your stipped down rom https://www.dropbox.com/sh/1qj773an3co8b10/5nStlVTGnT/Downloads Stripped down but include Blinkfeed? (I love blinkfeed) Do you have more info? (build numbers, what did you take out, what Sense version?) maybe make a new...

??? Okay to complete the confusion. I check every now and then on the Dutch HTC site on there you could see looking for the HTC ONE comming soon. (that is still on the site, the comming soon statement) Today I went to the site to see if there was any official info on the delay. And then the...

I agree lots of negative speculation, just wait and see. I'm not bound to any brand or OS for that matter. Currently I have a sgs1 and this is the first phone I come across that is a real step forward instead of just being an upgrade. So even if it takes another month.. sgs4 will still be just...