Search results

You can find it in the Havoc Telegram group for OP6/OP6T

Because we do not have a maintainer for our device at the moment...

I am following the Telegram channel, but there was no info about any release in the near future. It was said that there is no maintainer for our device in the moment. At least there was someone who stated that testing for fajita is ongoing. I guess we can only wait and hope for now....

I don't have any weather in my lockscreen, but also don't know of any setting for it...

Yes, it does.

Did you try to fastboot boot to Twrp?

Yes, that might be the issue! Here it is certified...

I just tried, no issues here. Installing and running without any problem. Can it have to do with the country from where you are trying to download and install? I know that developers of Playstore apps can not only restrict devices but also countries to install their apps. You could try with a...

https://drive.google.com/drive/u/0/folders/1r7Oijx4aXDE1WstDkJiOAMsBwpQRKOsD

Because there were issues with fingerprint security with some apps. Quick unlock is still included in the Timmah-builds in test folder, so you can have the same havoc version as official sourceforge build and still have quick unlock. Works flawless here...

How exactly did you install it?

Which recovery are you using?

Also working fine here...

Yes, you can make it work with havoc, so it is supported. But it is not included out of the box.

As far as I know havoc does not come with microG included. I always flash open gapps package and never even tried to use microG, just saw some discussion in the telegram group were it was advised against using microG because of to many issues coming with it...

Flash the unofficial Timmah-builds from test folder then, they have quick unlock included... Latest is 07/26.

9.0.7 is fine as base. These are the steps how I dirty flash a havoc update: 1. Remove any lockscreen security (PIN/pattern etc) 2. Remove any theme overlays Steps 1&2 are optional just to be sure. Normally should also be fine without. 3. Reboot to TWRP 4. Flash HAVOC & TWRP in a row 5...

Only the Rom, or also the base/firmware? Dirty or clean?

Were you decrypted before starting to flash?

Also I get bootloop to charging animation (which is not animated) when powering off the phone when charger is plugged in. It is like this since quite a while for me.

I had the same, I just now downloaded it again from OP and reflashed it from within Magisk. That fixed it. The red message is gone now.

Latest Blu spark works flawless

It is already back in the latest test build (06/07)

There were issues with fingerprint unlock in some apps. This is why it is removed for the moment.

It was posted in the telegram channel

Changelog for 29042019 build ?? Official Release - 04-29-2019 * Updated oneplus camera and gallery * Kernel upstream * Android Q lockscreen clock * Various tweaks and fixes

Or to flash smurf kernel and to set the config file accordingly... Fast and easy...

I had the same, was solved by booting into safe mode by keeping volume down or up (don't remember now, just try both if first does not work) pressed during the whole booting time ---------- Post added at 10:46 PM ---------- Previous post was at 10:40 PM ---------- I had the same, was solved...

Use any other package that includes what you want and flash that one.

As far as I know aroma is not yet compatible/working with Pie.

Hi, I shortly tried to use the inbuilt swipe up and edge gestures but could not make them work. I anyhow use the Oneplus gestures app from Playstore and am quite happy with them. Much more customizable than stock. Perhaps the inbuilt gestures don't work for me because I use the other app, would...

Latest build where the hide notch feature was brought back is 20181117 not 1114...

Hi, the instructions are not wrong. You can't have followed them strictly and seem to have some misunderstandings. I agree that OP6 can really be a ***** to flash correctly. I also had to learn it the hard way. Never before I had to set up a phone from scratch and to unbrick as oftrn. But once...

I am running 11/01 build on oos stable 9.0.2 without any issues. Still there are people claiming that OB6 is mandatory... So for me works fine, but there seem to be guys who could eliminate issues by switching to OB6 firmware.

Hi. Also I would recommend to flash the kernel as the very last. So, to flash havoc+twrp, now reboot to recovery (which changes slots), now gapps+magisk + kernel, now reboot to system and enjoy. In my experience it is very important to reboot to recovery after havoc+twrp to flash the rest on...

What are you running now?

And here is the one dedicated to OP6 only: https://t.me/joinchat/DeCfhk9-9pD7-UqxrONPVg[/ See you there. Cheers.

It is working fine here to switch back and forth on 27th build. ---------- Post added at 05:09 AM ---------- Previous post was at 05:04 AM ---------- No future here, it is already 29/10 here. You might have missed the updates posted in the telegram group. Yes, they are test builds but mostly...

It is working fine here on 27/10 build, just some of the weather info is hidden from the notch because of to many icons there. Otherwise all the settings are accessible ---------- Post added at 09:26 PM ---------- Previous post was at 09:22 PM ---------- Same here. Vowifi is working fine...

You can try to flash dirty, I did it with Havoc many times without any issues, but this one is quite a big update, so if you run into any issues you might have to go clean. I ran into quite some problems with titanium myself. Try Swift Backup. It is easier to use and not as powerful as TB but...

Very welcome. I really think if you enjoy flashing custom ROMs it is worth it to learn to backup and restore the important stuff fast and securely. If you can do that in 20 minutes instead of hours or even days you don't care any more to wipe. Happy flashing!

You can try to flash dirty without wiping, I did it often and it went well. But if you run into any issues you might have to go clean before bothering anybody. For this quite big update it is explicitly recommended to wipe data b4 flashing...

Welcome to the OP 6 world! If you recovered from crash dump you already learned quite a bit. I owned quite some android smartphones and always rooted them and flashed custom ROMs, but the OP6 is by far the one I bricked the most and had to setup from scratch. Once you get the hang of it, it is...

You don't have to know complicated fastboot commands. You only have to connect your phone to a PC, boot it to fastboot mode and double click the.bat file you need. Everything is explained in the according thread...

Didn't try other versions yet but 17.2. Was working well and passing safetynet for quite some time. ---------- Post added at 09:32 PM ---------- Previous post was at 09:28 PM ---------- I found flashing OOS fastboot Rom the easiest and fastest way. But flashing from twrp also works well.

Since 2 or 3 builds it's broken here, showing ctsProfile: false unfortunately

As long as you can enter at least fastboot mode you should be able to get out of any bootloop or bricked state. I would try first to directly fastboot flash stable oxygen OS pie as it could save quite some time and hassle. If that fails msm download tool will get you out of there. Don't bother...

I was there several times. Was very annoying also to me and took a lot of trial and error. If you get the msmdownload tool to work it will get you out of there! The next useful thing to unbrick your phone are the OOS fastboot Roms which you can install easily from fastboot. Once you succeeded to...

Which PIN issue?

Today I tried to switch on Pie controls in gestures menu. I regret that step quite a bit. From that moment on theDisplay went black and I could not do anything any more. I forced the device to reboot by pressing start Button long. It went through startup logo and bootanimation,then screen went...