Search results

Update 1.8.1.693 Update 1.8.1.693: -rotating lights brought back into view (bug fix) -holiday setting turns on and off (bug fix) -more tweaks to preferences look

Update Available Update 1.8.1.419: Many Changes: App is half the size, same with the expansion file, (added the ability to patch the base bitmap, but you can still use full bitmaps, see the obb flle in android / obb, it's a zip, the version and size are checked against mods , however you...

MwTTFdqWoZE Dash Home on the Play Store Hi, This is the app I am using with my car's android based radio to give it a custom touch and save my sanity trying to do anything while driving. The hardware and OS are rather limited in the device, so my app goes into retro land to get some...

Probably just lagged or too far down the list, you can search for com.bm.dashhome. Cheers!

Dash Home I created an app for the s100/s150 called Dash Home, it's on the play store if anyone is interested. It's a front end for the android home screen, gives you a wince kind of interface but on Android. Updated version 1.0.1.200 Update: Added 3D stuff. See this xda thread to avoid...

If the "rom" is deodexed, I believe everything would be signed using the test keys, if everything is not already (based on the installer). Isn't this an AOSP based firmware? I would try it and see. Cheers!

Can't really add much as I don't have an aux 2 set up, and it sounds like you have tested things. Going to grey is odd, it's like it is ntsc vs pal. Stripes sounds like a loss of sync altogether. If you had a scope you could probably see what is going on, some attenuation causing it to fall...

Hi, Do you have the camera powered from the unit or via the backup lamp? If you have the former connection, the unit decides when the camera is on, (it could be always on for all I know, or on/off with the unit) if the latter, it turns on only with the lamp. There is bound to be latency due to...

I was looking into trying to figure that out as well, I am not sure what the ADset.xml id and derived id are for and if they are supposed to match winca=X in the configs. There must be some baked in defaults when nothing is found. . On the device file system there is a /bootlogo/config folder...

I used the original Linux instructions to set it up as my laptop's sdcard reader was a problem for the windows app. I have bought several usb sdcard readers and they all died or got lost at some point, didn't feel like buying more. :) Cheers!

Hi, If anyone is using the back up wire on the unit with a KIA soul 2010 and the power and video connector with a backup camera, the wire is available under the driver kick panel / driver step trim and it's grey. I had to test around 20 wires to find one turned off when I went from reverse to...

Hi, Yes, a few times now. I reverted back to 2.4 and sygic works again and the audio glow live wallpaper, but maps live wallpaper still won't work, no biggy. At one point I did have the radio just changing stations rather than seeking, but I can't get back to that point, perhaps it is the...

Hi, I am having issues with sygic gps with the new update (2.5), it installs, loads the maps, then says unfortunately it has stopped, this also applies to audio glow live wallpaper and live wallpaper for maps. Special = "2" does nothing for me for fixing the tuner button, still seeks...

Hi, Thanks for the information in this thread. Had a thought for a solution to the non native apps not working with the buttons. What intents are registered in the default app apks? When you hit a button, the application is launched via an intent as this is android we are talking about. If you...

RBC / Bell allow the Galaxy S3 and S4 to use your phone to tap to pay, but requires a nfc sim card and doesn't actually work yet, but does promise the same support for future phones if they decide to bless them. Insert disgusted sarcastic smiley. (Sounds stupid to me, all you should need to use...

Quick question: What checks does the Miracast functionality have? What is preventing me from using Miracast and a custom kernel? I had added a few tweaks and one day noticed Miracast stopped working, it would connect, but not stream. I reverted to stock for system and it still wasn't working...

Hi, There is also a telephony.lteOnCDMADevice=0 that I changed to one. And I set the prefs to LTE/GSM/CDMA auto. I did the edit manually as well. Tip: chmod 644 build.prop when you are done if it gets changed. 4.4.2 stock here. I am in Canada. Cheers!

http://www.aliexpress.com/item/Free-Shipping-Wifi-Display-HDMI-Mini-Portable-Dongle-Compatible-with-Miracast-and-DLNA/691479188.html This one works. You can stream movies bought/gifted from Google Movies from wifi to the phone to the device, which is neat. Flick golf and games like that work...

The Nexus 4 is a freaky slippery phone, I have laid it on flat surfaces and have had it move a minute later and take a tumble. Last time was around 4 feet off my fireplace, landed perfectly flat onto hardwood floor without a scratch. Cheers!

I bought a nexus 4, wife is using the Atrix with Virgin Mobile. No more 3 year contracts. Cheers!

Hi, Like anything in the Linux/computer world, if you don't have the latest OS, you may not be able to install the latest apps or even compile them without modifying the source. Jaunty is rather old now, and the very latest version of everything is looking for something newer. You may be able...

Post the output of cat /proc/cmdline Sent from my MB860 using xda premium

Yes. Sent from my MB860 using xda premium

That would be whatever kernel image you wanted to replace your existing kernel with. As the ones around are in zip files with prepackaged boot.img files you would have to unzip and extract to get just the kernel part. Also, you would need any dependent libs copied over to /system/lib/[modules]...

Hi, There seems to me to be the general idea that swapping kernels is just flashing a different boot.img, however, what seems to never be mentioned is that each boot.img has a unique ram disk or included set of files/folder structure. This ram disk was designed to work with a specific version...

Hi, I updated the OP with the src project for eclipse. If someone wants to do more with it, go ahead. Cheers!

Hi, CG42 is not required to flash the bootloader and can be removed from the IHOP pudding. Cheers!

Your custom firmware doesn't list the word virgin because the same network is shared by both. What this means is that the two identifier numbers coming from the network (mcc 610 and mnc 610) are compared with apns.conf on the phone itself (these files differ in each firmware) and whatever...

Hi, The Blur hardware driven install script in the CWM zip references system/lib/modules, yet the zip itself only has system/lib. Just a heads up. I am not sure if all the files should be in lib or lib/modules but the install isn't looking at the right place...

I would try it but there is no link in that message. Cheers!

Uhm, "busybox --install ." works too, you just need to use a proper busybox build. Cheers! Sent from my MB860 using xda premium

DLNA, phone typing sucks, autocorrect. :) The service is running, there is no app to set it up, yet I see 3%, 4% for that and webtop. If webtop is going to remain useless with the lapdock, it should be shelved, or made an optional install or a disable switch, IMO. As for the comment about...

DNA and we top services should be looked into as battery eaters. Sent from my MB860 using xda premium

Moving the webtop/vendor image to preinstall instead might be worthwhile for dual boot purposes. Thanks. Sent from my MB860 using xda premium

Hi, Please emphasize that the script needs YOUR complete /proc.cmdline in there, from a working phone adb session, not recovery adb session as the recovery has it's own possible /proc/cmdline via a different kernel, etc. You are not just editing the mem=?? stuff. What would be best is to first...

Thoughts: 1. Connect to adb in network mode as you connect / reconnect the lapdock. 2. adb logcat 3. write an app that detects screen on or some other global event and see if there is a resolution passed to it or use adb shell to launch intents for some apps. What is the resolution being passed...

Use dump image from within adb in cwm. Cheers" Sent from my MB860 using xda premium

Nice, works well for me, it doesn't seem to be logging a lot of debug output but i had a cooler phone previously on the other leak. data speeds are very low, trying radios now. EDIT: that 100r radio gives me decent data speeds, but gps doesn't work properly. Heat issue when using the phone at...

edited my previous reply with new zip file and setcmdline from ramfix. Cheers!

Alternative boot.img, same as OP but with debugging turned off and adb shell defaulting to root access (for testing only). See attached. Cheers! EDIT: re-upped zip with the embedded cmdline from ramfix removed. You will need to use setcmdline via adb in cwm recovery to create your own on non...

If you modify default.prop in the boot image to have: ro.secure=0 ro.allow.mock.location=1 ro.debuggable=0 persist.sys.usb.config=mtp,adb The phone is much faster on first install, optional to have ro.secure = 0. Cheers!

There is a binary in ramfix.zip called cmdline, it is renamed addcmdline by the script, if it is renamed setcmdline you can copy and paste what is working for d00 to the boot image of the new firmware. cat /proc/cmdline give you want you want to copy from your working rom. adb into cwm...

Idea for those with tegrapart issues: When you have a working phone install, copy /proc/cmdline and use that with the ramfix binary, instead of just adding a [email protected] line, embed the complete working cmd line. See Ramfix thread for details on the binary used. Cheers!

I really think Google plans to dump Motorola Mobility and just keep the patents. They are thinking very short term, alienate the customer base, toss a few phones out there to make it look good and when the red ink keeps flowing, sell it off. Cheers! .

Now that the Atrix has reached end of life with no updates, I wonder if it will at least get a proper unlocked bootloader from M.

Sure, if you run into issues feel free to ask me questions. I am not sure how faux's kernel would change anything in how you go about installing packages though, I pretty much just worked inside webtop configuring things to allow for more installs, that should have nothing to do with kernels...

Quick note: webtop2sd is not compatible with what I am doing. I can't support it as it uses a different method. I'll get back to you on the rest, got to run. Cheers!

That and the fact that is is a FAT file system with the Linux file system emulation assigning default permissions for files, not going to work regardless. Cheers!

You can replace jaunty with something later in the repository list (lucid, karmic) and refresh, by doing that you can get the later versions of some things, however you will run into issues with the kernel version and/or libc6 needing an update. This is rather touchy stuff so you need to know...

I was referring to docking the phone as opposed to streaming video over wifi over distance, I say use NFC for communications including video/sound and induced recharging ala powermat all at the same time. Technically challenging perhaps but not science fiction. Cheers!