Search results

MwTTFdqWoZE Dash Home on the Play Store Hi, This is the app I am using with my car's android based radio to give it a custom touch and save my sanity trying to do anything while driving. The hardware and OS are rather limited in the device, so my app goes into retro land to get some...

Quick question: What checks does the Miracast functionality have? What is preventing me from using Miracast and a custom kernel? I had added a few tweaks and one day noticed Miracast stopped working, it would connect, but not stream. I reverted to stock for system and it still wasn't working...

Hi, There seems to me to be the general idea that swapping kernels is just flashing a different boot.img, however, what seems to never be mentioned is that each boot.img has a unique ram disk or included set of files/folder structure. This ram disk was designed to work with a specific version...

Here is what I have done for my personal webtop so far. Download To install: Make a partition on a SDCard, formatted ext3, so that the first partition is FAT, second partition is EXT3.(2GB should be fine, YEMV) Extract contents of osh2.tar.bz2 to this ext3 partition. Make a backup of...

Hi, You know that custom preinstall partition with the dosu command by xda member eval- that was/is used to root phones? Well, for Bell at least, if I use the stock Bell preinstall partition and have my shsu binary added in with 06755 (0.0) perms, it stays between upgrades. I have just gone...

Hi, I recently bought a lapdock, but while doing the various hacks/tricks I keep running into the problem of not knowing how to enter tilde on the keyboard. Copying it from a web page and pasting is rather annoying. Simple question, perhaps. :) Cheers!

Hi, I did up a home replacement for my Nook simple touch, thought I would share it. This is an initial release, no doubt there are bugs, incompatibilities, etc, you were warned. There are no checks for other devices at this point, NST only. Thanks to the nook community for the noogie.img file...

This is my attempt at a Bell FAQ, it is a work in progress. Q. Why don't the instructions I found on how to do X not work?A. This is a development forum, sometimes things are written in shorthand assuming you know things you don't. At lot of things are specific to one carrier's phone or...

Hi, This is a small CWM zip to add the [email protected] line to your existing boot and recovery partitions to fix the ram issue with the international unlocked bootloader. If the second mem is already there it does nothing. The point of this is you can have a regular recovery flashed and fix the...

AT&T is not supported at this time.Update: This is a CWM zip for the official Bell GB in stock format. Bell_GB_2.3.6.zip (md5 d757a0c2c2bb830946956d2411d22ccd) Bell_GB_2.3.4.zip (md5 e23a8d0895a13d032a2f46227d2ad7b2) Notes: This is a stock Gobstopper like the Bell 2.2.2 one, it is...

Hi, I haven't seen any good resources for how to edit edify scripts, so I thought I would create this thread so we can pool our knowledge on the subject. Intro Inside your typical CWM zip there is a folder called META-INF, inside that there is a folder called com and come CERT files, inside...

Hi, I had posted this in the Q&A thread, thought I would post it here as well. Glossary: boot logo: the static image you see when you turn on the phone. boot animation: a series of pics in a zip file that are displayed after the boot logo. Hi, If you want to change the boot logo, you just...

Disclaimer: You may brick your phone. NOT for AT&T Reminder: Make sure your phone has enough battery charge to flash this, it's larger than normal.Hi, Here is a huge CWM zip that restores your Bell phone to stock 2.2.2. I have tested it on my phone several times and it worked perfectly, there...

Hi, In the ap20bl.img, at least in the Bell gb firmware, there is a new boot option called bp tools. When connected to a PC, it installed several more drivers, interesting to me at least. See attached.

Hi, Here is the radio from the Bell GB OTA update, edited to remove everything but the radio. Preq: Unlocked and CWM recovery partition installed. May work with regular CWM, not tested. Download it here. I am currently using it with Bell's 2.2.2 Froyo. Speed test isn't the greatest, 77.15...

Hi, I seem to be bricked more than usual. Don't ask me how, I was doing something, rebooted and now I can't get into early usb mode or android recovery. I have no clue what half the other boot options are. I can use rsd lite to flash sbfs, no problem. Phone is stuck at initial m, no...

Hi, I extracted the radio from the Bell OTA and created a sbf from it. Here you go: Radio N_01.77.15P Cheers!

Disclaimer: I have only tested this on my own phone. Everything should work fine, but I am not responsible for anything lost on your phone.. Here is an application based on my Bell Deodex scripts. Still a work in progress, but I am running out of things to do with it so it may be ready for...

Hi, Here is another boot animation for you, a port of zoom quilt 1 and 2. See this link for info: Zoom Quilt 1 "An endless zoom illusion created with flash by many collaborating artists." This is Zoom Quilt 2: Zoom Quilt 2 Download ZQ1 here Download ZQ1 smaller version here Download Zoom...

Here is the radio from the French 2.1.1 sbf. Download it here. Works the same as 1.87 already posted. Cheers! EDIT: Apparently there are two versions in this sbf, this would be 1.92 for baseband, although 1.86 in the codegroup5 file.

If you have a unmodified, as in non Telstra Bell Atrix, could you please run the following script and send me the file it contains. I need to make sure what is unique and what is the same. No personal data is captured. I just need a couple of folks to run it and post a link to the file here. You...

Single Binary Format Hi, I thought I would start this thread so that all info about sbf utilities and formats specific to the Motorola Atrix could be in one place. (Kenneth Penn's idea) I don't know everything, not a lot, barely anything really, but I will share what I do. Feel free to chime...

Hi, Here is a boot animation I did up, enjoy! Download it here

Hi, I have managed to keep my Bell firmware by updating just the radio, just edited the Telstra sbf to remove all code blocks but RDl1, RDl3, and Cg5. :) Download it here. Cheers!

Has anybody had any luck with transparency and draw9patch? for example, take the music.apk file and change the background for the widget to be 80% visible, toss it into the sdk draw9patch tool, save it. You get a simple stretching operation.

If you are looking for how to get back to stock Bell, go HERE. Disclaimer: I have not tested this on anything but my phone. This is a development section of a hacking website. Make backups. Know what you are doing. Credits: Brut.all for apktool edgan for 2nd-init designgears for aroot...

Not a problem. Would delete if able.

This probably has been asked before, but I am not getting results with what I am typing into Google or this site's search. I have rooted my Legend and have Froyo installed, latest radio, etc, I am using the stripped down version of B 0.7. I am using a wireless n router, d-link 825. The problem...