Search results

Thank you for the reply ! Does that mean the 2 features I was asking is currently not working as intended ? (I'll tweak other parts of the kernel if it is so.)

Good day, I have just clean installed v2.7.0 (about 10 mins ago) and is unable to bring CortexBrain and CronTab online thru Synapse. Is there something else I need to install or do before I can turn it on ? Not sure if it is relevant but Magisk lose root and I reinstalled v14 instead of v14.2...

Good day, I am experiencing bootloop issue after installing the module (1.7.3) through the Magisk Manager. Phone is freshly factory reseted and no more modules are installed. I am running Magisk v14 with root and busybox module installed, Android 7.0. Looking back for a few pages but did not...

Good day, I got this ROM working after getting lost in the process along the way and I just want to ask something regarding Magisk. I did not select the option to install it during the initial setup and I went over to the Magisk thread itself which told me that I needed a stock image which they...

Good day, I have encountered a problem at step 7. Go to Wipe and click on format data. Type "yes" and it will format. When I try to mount or wipe, it will pop up an error telling me /data and /storage not found and /data crypto folder is missing. I am using TWRP 3.1.1.0-herolte and...

Good day to all, this is my first phone that comes with internal storage and not an external SD card so I just wanted to ask if performing a factory reset (via recovery) would erase the internal storage that holds the photos, data, among other stuff. I did a rough search on Google and found...

Hi, I have recently moved to this phone from an Xperia Z1 and is getting overwhelmed by the amount of work being shared. So far I have managed to unlock the bootloader, flashed a custom recovery and kernel and rooted the phone. I have been so far being confused by the terms being used to...

I did some reading, digging and experimenting and ended up with more questions. Since I can't figure where the dnsmasq.leases file was created, I went to try out other tethering apps (WiFi Tether, OpenGarden). The app reported that tethering was on but I am unable to see it on my other device...

Hi all, does anybody knows the location where dnsmasq.leases resides under /data/data folder for stock WiFi tethering ? The reason for this question is that I wanted to use this -> http://forum.xda-developers.com/android/software-hacking/adblock-haveged-dnsmasq-mod-t3019468 and one of the...

Went thru the list in data/data/ and located what appears to be the native WiFi hotspot location (com.sonymobile.settings.wifi.hotspot2 or com.sonymobile.seamlesstether), there is only a lib file in it and toggling the hotspot on and off generates no file. Am I doing something wrong ? Or it is...

Hi PiggyFlooper I was reading thru the instruction on the 1st post and there was this requirement to modify the pointer in the /system/xbin/ARCHIDROID_CRON to point to a file which is supposedly generated by the tethering app. Is there any way we can find out beforehand how or where this file...

Greetings, I am looking to move back to KK (the .108 version, tried the Vodafone .157 and it gave me problems. That and I'm not exactly sure of the differences between the 2) from LP and wondering if it is a requirement to flash the kernel FTF before flashing a 3rd party kernel such as...

Right now I'm on LP but will be reverting back to KK as I did something funny and Phone app broke. I'm looking to use the phone stock mobile Wi-Fi hotspot to allow my tablet to access the net since it's on a low data plan. I am open to suggestions on what app I can use to achieve the same thing.

If I may ask, would this work when using the phone as a hotspot? (I'm not exactly sure if tethering is the same as a mobile hotspot) I had some issues with CB back on 4.4.x that broke the hotspot function as dnsmasq refuses to turn off.

Hi OP, I am currently on this firmware and it has been working really well (before I did something funny to it XD). I just have some questions that I would to ask regarding flashing your packages (if you don't mind) Right now I am encountering some issues with my Contacts having the error...

On discovering this issue I actually did not know that CrossBreeder was the cause, I checked out several solutions online (such as removing the wifi directory) and it didn't work so I did a factory reset which restored the functionality. After further more testing with Titanium Backup and...

Hi PiggyFlooper, just recently discovered that your zip broke the WiFi hotspot on my Xperia Z1 4.4.4. It returned "Error while tethering" and goes into an endless loop of turning on and off the hotspot.

Hi bigsupersquid, thank you for your reply and instructions. I'm building it for a 4.4 KK ROM as it seem like LL still needs some time to work things out.

Hi, I seem to have a problem with init.d scripts loading on r25. I placed a test script with the following code #!/system/bin/sh touch /data/initd_test.txt echo "Testing initd..." > /data/initd_test However no files ever generated, indicating there might be an issue with init.d Can anybody...

Pardon me but how do you build the dnsproxy2 from the GitHub ? I ran thru the post link but is unable to find the link for the dnsproxy2 file and the one I had is really old when 4.3 just came out. Another question is that is it possible to uninstall it with the older version of the uninstall...

Hi all, pardon me for asking such a question but the r25 version is safe to flash on a 14.4.A.0.157 ? I read somewhere among the pages that an earlier version was built with .157 sources, hence I was wondering if the later versions would be compatible. The reason for asking is that I read the...

Hi all, I have recently unlocked my bootloader and upgraded to 4.4.4 (Build 14.4.A.0.157). Going thru the General section it seem that during the 4.2.2 to 4.3 era that there is a high chance of bricking the device when there is mismatch of baseband/firmware/kernel. Is the issue still happening...

That's unfortunate, I was looking to use Titanium Backup to move my stuff over. I will have to explore other options then. Thank you for your informative reply :D

Hi, I just wish to ask if there is any undesirable side effects from unlocking the bootloader ? I came from the Sony Xperia side and there are unfortunate side effects such as loss of DRM keys and stuff. The sticky thread for information under the development section for knowhow is filled with...

Hi, I was reading thru the flashing instructions on the 1st page and there is this section that talks about the need to flash Sony's firmware to match monx's base ROM. Is it absolutely necessary to do that ? I have read on another thread that it is possible to brick the phone if the firmware...

Hi all, Just wish to check if this kernel will play fine with V6 Supercharger and CrossBreeder on the SlimBean ROM? I tried it once with Asylum and it has issues with Supercharger. Sent from my GT-P1000 using xda app-developers app

Hi Many40, I have used your PhilZ settings previously on NeatROM 4.4 but I went to test out AOSP (SlimROM in this case) for fun. Taking into consideration that PhilZ is very close to stock and similarities between governor and I/O, would it be possible to apply them to CM kernels in general ...

Your ROM needs to be upgraded to enjoy the latest version Sent from my GT-I9100 using xda app-developers app

johnbeetee, you're right. The script executed, I guess Script manager is the one at fault Thanks for the script, will be testing it out via init.d instead !

I'll try it with the terminal emulator and update you again later =D

Hi, I was trying out your pegasus script and I get syntax errors for "fi;" It say, "syntax error: unexpected "fi" (expecting "then") I ran this using Script Manager tho, not in init.d Could that have made a difference ?

For some unknown reason, the update broke and now I can't update anything via PC Odin. Not GB nor ICS I was following the update procedure for ICS and it went into a bootloop when the update is completed

I encountered an odd problem when upgrading from 11.5 to 11.9. I have some apps reporting that I am out of space and thus is unable to start the app or unable to install any new more apps. Only by performing a full wipe does such issues went away. Is there anything else I can do besides full...

Scratch that, I found what I'm looking for

Just reporting back that all is currently working well on 3.2rc1 and Epsilon v2. Made the move finally after GB development is totally dead and I missed Siyah too much XD BLN found working with whatsapp, others not tested yet. Full battery cycle now with default profile. Damn, I missed you...

Just tested this ROM last night, so far so good. Came from FoxHound v2, performed full wipe. Sent from my GT-P1000 using XDA

Went to the official website and browsed the chinese version. Are we using the 1.0 or 2.0? Can't really seem to find the download link for it tho. Their app is equally interesting too. I read from the link in the OP that ICS is available already? This is surely an interesting ROM to try, I...

Hi, with regards to AndreiLux's settings on gohkan's website, can I just insert the code into an existing script, say VC, or do I need to create a new script in order to get it to run ?

Just flashed 2.6.7 this morning, everything seems ok. Only thing I noticed is that the overall responsiveness is down. Tested with sio with demand/lulz/smartassv2. No scripts, no oc and uv settings which I have used for the last couple of revisions which is stable for my phone. Tho I must say...

A little question from me about the rest of the addons in Pikachu's thread, beside the screenstate_scaling addon, has anybody tried the rest of them ?

Hi Pikachu, thanks for the reply. I think I might have gotten the i9000 mount instead, going back to reload it again. Thanks !

Hi Pikachu, I have installed your Thunderbolt! and screenstate scaling scripts as according to your instructions. Everything flashed well and checked with File Explorer to ensure the files are in init.d I then ran the scripts with mounti9000 as mount success but for sqlite_optimize I get a...

Just curious, what is this cfg v3 that I saw on your signature. Is it some addon that you created that compliments the current battery scripts ?

Hi all, with the introduction of scripts into the new 2.6.x series of Siyah, I got a bit confused about flashing the kernel. I'm currently on VR3.0 running 2.6.1/battery script combination and if I were to upgrade to 2.6.2, would it be better to a) just flash the new kernel and re-apply...

Hi all, I have read thru the thread and still have some questions unanswered. I live in Asia (Singapore) and my SGS2 has the DXKF1. I'm currently running VR-2.4.2 with the KG6 modem. Under the grand scheme of things, where does the KF1 lies ? The opening post has a modem which merges KE7 with...

Problem solved.

There was 4 files in /system/usr/keylayout, 2 which is the .kl files and another 2 which I can't remember off my mind. I reckon it should be correct but here is the breakdown of what I did, 1) Boot into recovery 2) ADB mount /system 3) Change directory to /system/usr/keylayout 4) Push the file...

I'm having a missing curcial-oj.kl error with your zip file After I tried to manually push the file to my phone, it doesnt boots up

Hi BlaY0, first of all, thank you for the great ROM ! I'm currently using 0.6 with a2sd (ext3), the ext3 is done during 2.1 and not done in according with your guide. I have been experiencing random reboots and phone hangs lately. Could the issue be with the ext3 ?

Hi all, I have encountered an issue with applying the patch_1.zip. I installed it via ADB and has the following error. =======Error Message======= Install from sdcard... Finding update package... Opening update package... Verifying update package... E:Wrong digest:data/local/bootanimation.zip...