Search results

I guess you need to "forget" your home wifi if it's still in range. Can you please share the link to Android image you used on R Pi 4 ? Thanks!

I've tried with 7.1.2 tv stick but got no response from the car headunit, however got it working with a Xiaomi phone with Android 7.1.2. Don't know how to downgrade or even if it's possible because there are a lot o versions of these sticks and found few tutorials but sticks from images/videos...

"Car mode" is enabled automatically on master phone after successfull connection with car headunit. Don' t worry about car mode on stick. The stick/slave needs only AAgw app to route data received from wifi to usb port.

You can ask Emil for different versions of the app. Also, if you have root, you don't have to check the "NON-root" option within the app settings. After fresh install of AAgw on slave, a system message pop-up to move the app to system in order to allow usb permissions. Here you have to choose...

Emil added some tweaks for this issue on version 2.0.6, so try that version.

It's a bug. Install > open app and tick your settings > chose "NO" when prompted to move to system > grant permissions > exit app and grant root > restart phone > open app again > move to system when prompted > restart twice

Also, for Alderon666 It works on Kia Proceed 2019 with 7" headunit (without navigation). My config: master = LG G8s - Android 9, without root; slave = Xiaomi Redmi 4X, Android 7.1.2 MIUI 11 rooted, and AAwifigateway 2.0.6 without tethering, installed as system app. Steps: Enable Bluetooth...

Try with time in 24h format. Another password to try is 2998. Edit: i saw 11:45 pm on phone's screen ... Sorry

I also have Kia Proceed 2019 (standard, no GT). Please tell me what type of head unit do you have: 7" or 8" ? with or without navigation ? what software version ? Tks,

I would have told you if i knew. Did you read back few pages ? Nobody knows how to access android settings on Mobis infotainment at this moment ... only engineering mode. The same thing i'm looking for, to activate wifi and use Android Auto wireless and get rid of the usb cable.

This is how it works on my car: go to settings > system info and do the 5+1 clicks according to this video: https://www.youtube.com/watch?v=tdOxEf87FF4 You need to press at the verry bottom of the vertical line 5 times and 1 time on the right bottom corner. It's important to press BOTTOM, even...

Proceed 2019 I have a 7" Mobis HU without navigation and found that there is an active gps module. Found that when i was looking to enable wifi. Maybe there is a wifi chip but disabled from software. Does anyone knows if it's possible to enable wifi on 7 inch Mobis head unit?

I also tried to install compatible themes (according to developers description from Playstore) with Asus launcher but no luck. I don't have root. Is there another method without root access ? I like Asus launcher but i hate his icons/notifications :)

Check under Settings > Location > Menu (3 vertical dots on right upper corner) > Scanning and turn off "wifi and bluetooth scanning". These are automatically activated by third party apps (e.g. Google Maps > location accuracy tips) when request location services. This is also a cause for big...

Carat shows me as Hogs, apps i didn't use these days (Maps, Officesuite, ICEsound service ...). I think it makes some predictions based on his user database. I appreciate your time and effort to make all these tests. Good luck !

I turned off "Clean up in suspend" option from Mobile Manager > Settings and left the default settings for Doze and now my battery seems to have a normal behavior. In this way Auto-start Manager from Asus doesn't try anymore to kill user apps. I get 1 day and 10 hours battery with 4h 30 min...

I agree with you and i really appreciate your work ;) Yesterday I've installed Carat after i read your first post and today i did new OTA update and cleared cache partition. Let's see how it works in the next few days.

I don't think it is a good ideea to change Doze settings for system services like com.qualcomm.* or telephony*. In theory, these services should be compatible with operating system and they should work as designed. I would focus on third-party apps who doesn't work well on Nougat. Anyway, is...

My hints: 1. The switches have the same firmware (or Cisco IOS) version ? Even the config lines are the same, some software features are activated/deactivated by default (without a dedicated line in config). 2. The signal is good ? 3. Can you clear the arp-cache on switch? Be carrefull with...

Network provider's data accounting system is not influenced by that setting. Trust me, i work in telecom ;)

First of all, you have to be sure you can redirect calls from one sim to the other. This feature depends also on your service provider. Some of providers allows calls redirects only in their network some of them don't allows redirects for pre-pay sim ... check this with your providers. The...

Samsung is trying to make this easier for users and has an option called "dual-sim always on" under settings. If you enable this function, you get this warning: "with some service providers this function may not work properly or you may be charged" . Both sims are always "on-line". You can...

S3 Neo dual (I9300I) has 1,5 GB RAM with 1.35 GB available for user.

It is NOT dual sim full active. Once a call is active on one sim, the second sim it's "out of network" but you can redirect calls from one sim to the other when "out of network". Ofcourse carrier charges may apply using this option. It's your decision. HTH

wake up lag I have a 2 seconds lag when i wake up the screen. No matter if i press home button or power button. Tried all types of locking screens: swype, pattern, pin, with or without widgets, with or without power saving ... the screen lights up after 2 seconds from key press ... looks like...

Hei guys, i want to root my Neo too. What about "device status" under: settings > about device > status ? Does it says "official" or "custom" after root ? Are there any signs which could result in loss of warranty ? Tks,

I'm also interested on this. Tried ver 1.5.5 last week but it did not work on UNrooted Moto G with stock KitKat. Can you confirm ver 1.5.6 works ok ? Tks,

both sim's works on 3g I confirm: both sims works on 3g but only one at a same time. You have to mannually select which sim will use mobile data on settings > my device > sim manager > data service network. If you choose sim2 for data, sim 1 will automattically switch to 2g network and sim 2...

Yours settings are good, for sure. If apn settings on his phone are not like yours, then data connection don't work.

Check APN settings on his phone: Settings > more > mobile network > access point names.

I've updated through PC Companion to .145 (OTA said no updates were available) and root is not working anymore :( ... so stay with .140

I just updated my V to .145 via PC Companion and root is gone :( I was on .140 before, and no updates were available ota. I'm looking for a new root method now.

Read first post from here for NFC problems after root.

Yeah, all required settings were according op. Thanks for tips. I managed to root it with this guide.

It does not work on Xperia Active ST17i with 4.1.B.0.587. Tried on windows 7 x32 and x64 and vmware XP SP3; checked all prerequisites; tried with/out SD card / SIM card, the gui reported successfull but superuser wasn't there. But the ideea is good :)

Tried few times and successfully rooted my Xperia Active. Now I just want to share my experience with this: - at step 1, a compatible .562 kernel with my ST17 was Ray's kernel -> st18_4.1.a.0.562_kernel.ftf; flashing other kernels resulted in phone soft bricks and various errors in Flashtool -...

In screenshot you have a very weak gsm signal in your area. This drains your battery. If you don't use 3G/HSPA mobile data, you can try to manual switch to 2G network (2G band use less power from your battery). HTH,

One hour ?!?! You are charging it at 380 Volts ? :d Mine is charging in around 2 hours.

Start read faria's thread from post no 136

I'm using Faria's 4.1.2 rooted rom with ALL2 baseband, but in 2 days i didn't noticed any signal drops. Maybe you can try some apps, like this one , or visit service center.

The code is *#*#info#*#* but it doesn't work :(. I don't think it's a good ideea to disable those settings. Maybe it's a temporarily problem and i know Vodafone is testing/launching 4G coverage. For me, this network issue is happening once in a week. How often do you lose phone signal ?

Well, i understand to lose signal if network coverage is bad, but my phone gets "network stuck" in the middle of town. I noticed this few times: at job, the phone stands on the table near me, and i receive sms about missed calls (i have voice calls diverted to voice mail when unreachable). If i...

I'm exactly in the same situation :( . Please let me know if your new firmware solves the problem. Tks,

This is my home screen

You can try a app from market called "imo". I'm not a big fan of gtalk app but i used it few days without any fc on stock JRO03H.I8190XXALJL build.

In ICS, notifications and ringer have the same volume slider ... maybe this is what you heard ;)

1. Install another launcher; Apex launcher works fain for me. 2. Install "power toggles" from market.

You have a step by step guide on page 8 in post no 74 It works great.

Well, i'm not on CM7 anymore but i'm sure that "in-accurate option" exists ... maybe i don't remember exactly the path :( Anyway, i have few more tips: 1. try using 2G only network ... sounds weird but you have nothing to lose :) 2. link 3. link 4. link 5. you can install Sense 3.5 rom.

Have you tried the next setting from CM7.2 ? Settings > Display > In-accurate proximity