Search results

Ok I'll wait before switching as my daily driver

What's the issue with battery drain/SoC heating up?

Running Franco kernel and its got ExFAT support.

EXFAT SD card here also, worked fine in LOS 15.1, can support be added in kernel for 16?

Official builds is back for 16.0 since Nov 5th, maintainer is aryankedare https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/pie-lineageos-16-0-t3915672

What a coincidence! I found an S4 in the battery recycle bin yesterday and boum today I installed LineageOS on it without knowing it was JUST released haha, thanks!

Same here, changed realease-key to test and no ladybuy

Can't seem to be able to get Kouch's Superuser.zip to install, keeps complaining that the su binary is out of date and is unable to update it Edit: ah, no longer maintained and doesn't support Lollipop, installed SuperSU fine.

AT&T variant can be unlocked for free from AT&T directly, you can find them on Amazon.com for $30-50 USD, after tax, shipping and fx convertion, we are looking at $50-70 CAD

Yes that's what I changed, I want to make things larger and not smaller, thus 180 (180 is also the native/physical DPI of the screen)

Trying to run CM11 final with dpi 180 but Trebuchet FC and lock screen looks weird. The lock screen also lags and is very slow, tried to change the widget from cLock to the normal digital clock but it made no difference and tried to change cpu governor as well. Does your version noe exhibit the...

I see that in the known issue for cm11 that there's wifi wakelock issue, so that means as long as wifi is on, it will drain the battery right? No way around that? Yesterday I flashed cm11 final, reflashed gapps, added NotoColorEmoji.ttf and replaced boot animation with cm12 dark 320 :) I...

Should have checked this thread before flashing gapps, now I will have to do it over again lol I tried a few version of Google Play service in different variants, all gave fcs without the proper libs and perm flashed under /system. Ended up flashing the lightest (and most up to date?) gapps I...

Yes, as the charts points out, you can't just relay on class alone. There are 7 class 10 cards in that list with abysmal random 4k writes < 0.01MB/s ouch Anything at 1MB+ should be good and surprisingly, the top one is a Sandisk 32GB CLASS 2?!

Will this somehow work with the P500? https://github.com/Firerat/CustomMTD/ I've used it on an HTC Legend before. Since most Android devices are mtd based... However, the mtd layout on the P500 have the system partition sandwiched between boot and recovery: (is this correct? Not from my device...

I thought we have to use version -010 for armeabi (armv6)? Can I just install the Google Play Service without flashing anything to /system/app?

Guys, just a heads up, Class 6/10 are not the best for random 4k writes necessarily, it may actually be the opposite. The class only dictates the minimum sequential write speed, eg during file copy. One have to look at actual benchmark to know if a certain card is suited for random 4k writes...

Flashed RC14, looks good so far, have yet to load gapps, which one is most compact and up to date? PA? No more nightlies too?

I tried it and it wouldn't flash the latest cm-11.0.0-RC14-p500.zip

Amazon.com ou Amazon.co.uk perhaps? I'm in Canada and I got it from Amazon.com (US)

On the Moto G LTE, I can't use photosphere and the Spotlight player :( Gonna take out the larger magnet..

Same problem with my Rogers/Fido XT1040, 4.4.3, no updates to 4.4.4 yet.

huh Motorola is no longer a Google company, it was sold to Lenovo

I was able to add an account but without setting the option to "Ask for each call", the default is to use it only when making internet calls: For all calls when data network is available *Only for Internet calls Ask for each call Anyway to change this setting by command line? I'm gonna try...

How does a level app works then? Smart Tool is able to display pitch and roll correctly Edit: Found my answer, it has a multipurpose AK8963 magnetometer which also provides orientation and hall effect (magnetic cover screen on/off)

I don't see what's the hype over aptX, it's just another low complexity/low latency codec based on subband ADPCM. One will get much better results by avoiding transcoding altogether by losslessly transmitting MP3 and AAC as-is to supported BT devices. See...

How did you remove the larger magnet? You have to separate the cover?? Then glue it back? o_o

I have the official flip shell and the thicker textured rear cover, almost "soft touch", is much better than the slippy rigid plastic of the stock cover like these clones. The magnet auto on/off is also nice to have *BUT*, it mess up with the built-in compass/magnetometer, so while using Google...

Maybe the Moto G also have a low bitpol (bitrate) value for the SBC codec? When used with a compatible BT receiver that accepts MP3, it will sound fine whereas transcoding a loosy format to SBC at a even lower bitrate will cause audible audio artefacts. I'm thinking of getting these small 30...

+1 for Llama location profiles Power Toggles, notification toggles and home screen widget (I used vibrate/volume/silent+brightness+LED) so I can adjust those quickly without unlocking my phone :good: Screen dimmer, when you need dimmer than lowest :cool:

Last nightly from March 1st, it's no longer building them?

Is there a way to gain temp root or root without unlocking the bootloader (Superboot trick)? I just need to SIM unlock the phone and leave the rest as stock as possible, perhaps even skip the installation of Busybox. I guess I could just dump out that whole partition then run string on it on a...

Llama does it and is much more powerful https://play.google.com/store/apps/details?id=com.kebab.Llama

How about 10.4.2.17? :)

Looks like the OTA for the WW firmware is out, I did a check update this morning and it tried to download but failed. Will try again later tonight after work :)

"How to make your tablet ugly" Why does one so much protection for their tablet? Such slim and streamlined device uglified. I can't image the weight on it lol

It's actually Gorilla glass, so no need for a screen protector, had mine for 2 years now, I don't really baby it and there's only maybe 3 tiny scratches and they're not visible when the screen's on.

I'm having the same problem with a Fido Xperia U, had 10 attempts initially, now down to 4 after going through an ebay seller mister unlock and now cellunlocker.net, both provided me the same unlock code but it doesn't seems to work. Mine's a brand new phone, everything stock, I even tried to...

No offence but it looks fugly

RC1 did have a battery drain issue, use RC2 or one of the nightlies What version are you running?

No this: p500: Revert to Froyo radio stack (android_device_lge_p500) http://review.cyanogenmod.com/13233 That would explain these problems:

Since update-cm-7-20120420-NIGHTLY-p500-signed.zip It reverted back to the froyo baseband, does it mean it won't work if the phone have Gingerbread on it? So the baseband would need to be downgraded?

I requested on Feb 9th for LG to release the source for the P500h gingerbread and they replied today that it was done a month ago but forgot to inform me lol For those interested the source code for the V20a of Telus's P500h is out as well.

Anyone built a kernel off the official source code? Is LG's fix of the touchscreen better/worst than the workaround/patch already available here?

wow I thought it was gonna wipe everything so I made many backup but the LG utlity came up after the long first boot up and restored everything :cool: Edit: More infos, used Win7 x64, had to disable Kasperky (antivirus) Had 2x virtual modem listed, disabled them both (looking at the logs, it...

A little glitchy but works once it's up, either hangs or take a lot of time to get ready Flashed CWM 5.0.2.0 using fastboot :) I suppose flashing a KDZ "russian" way would loose the fastboot?

I think you'll need a flashable zip, the one koush provides is just a img and a fake flash .zip

Did you highlight fastboot in the bootloader/hboot and pressed power to select it? It should say fastboot usb plug or something like that

Good call, copy paste error :) Also if you don't have the fastboot command, you'll need to download the "Android SDK Platform Tools" (under "Tools") from the SDK manager (how did you get adb working though without the platform tools?!) Should be under the same directory...

See http://developer.android.com/guide/developing/device.html "If you're developing on Ubuntu Linux, you need to add a udev rules file that contains a USB configuration for each type of device you want to use for development. In the rules file, each device manufacturer is identified by a unique...