Search results

If the chinese vendor works for you, that may solve my issue as well. I too ordered mine from aliexpress so I assume I got the chinese version as well.

I tried using chrome and opera. Never the built in browser though.

The thing is, I know the mod is doing something. If I set the screen refresh to anything above 84Hz, the screen lags to around 30fps. Just don't understand why testufo isn't showing the refresh rate I set or flashed.

I'm in the exact same boat as you. Did everything step by step as per the the guide. Aida64 reports screen refresh rate as 82 but the testufo site shows 60Hz. This is on a fresh install of .eu 2.3.26 weekly. If you figure out your issue please let me know.

"unable to decrypt fbe device" I get this error when flashing the kernel but it still goes through with flashing. Could this be an issue preventing me from getting the mod to work? I believe I am fully decrypted now.

Hi, could you explain what flashing the fde does? And how do I do this? I think I need to do this because I reflashed the xiaomi.eu rom in orange fox recovery without enforced encryption/DM-Verify, and it still doesn't work. The rom boots, even after flashing the vendor and dtbo. Flashed milk...

I'll try on a clean install later. Maybe that would work.

I'm probably missing something simple. Flashed milk kernel, patched vendor image, fix. The phone boots and wifi works. The app has root and applies the overclocked frequency. Rebooted. Aida shows 75Hz, the app says it's on 75Hz but testufo still shows 60Hz. Really strange...

Firstly, thank you for this mod. I wanted to try it ever since I saw the previous version. I have root (magisk 20.1), the app requested and was granted root and I did reapply the setting in the app. Everywhere says the screen is running at 72Hz but when i run the test it says 60/61 Hz. Not sure...

I tried this and everything flashed and worked. No issue with wifi either. however, When I used the app and set the screen to 72Hz but on testufo website it still shows 60fps.

I tried it and got stuck at boot screen also. Haven't tried the fix yet. i'm on .eu beta 20.3.26 with stock kernel.

Hi, make sure your bluetooth is off. Some roms have this bug...

Uninstall Sounds 2.0. Go to apkmirror, get google sounds 1.0. Install ;) Edit: Don't forget to disable "auto update" of sounds

Downgrade "sounds" in play store. The latest version crashes on our devices.

YumeMichi Loving this rom. Very fast and smooth. Installed latest build and found the battery drain was a bit higher than the initial build. Also, is there any way to vary the brightness of ambient display? I loved the dim brightness from the first build, but I know there are members that prefer...

Used the OTA updater, works well! No issues there at all. Also, I was able to keep root after the update. Rooted using magisk 16.

Happy new year everyone! Thanks again for your hard work Michi.

Works fine for me. Flashed AOSP 8.0 and other items fine.

Thank you! This worked for me. Dirty flashed the last build and everything is good so far. No more overnight freeze. As for the boot animation file, you would need to copy it to system/media, overwriting the original bootanimation.zip and give the new file the proper permissions. YumeMichi...

Hi, Were you able to get the rom to boot?

pbarrette, Thank you for your contribution to our devices! I've moved on to another phone a while now, but it's because of you that I still can use my Mini as a backup.

Just tried it and it works...

Clean flash? I have no problems with the newest update. Even got magisk 14.2 working without an app FC's.

Still got my droid mini around. Will do some testing for y'all. Edit: Can't get this to boot. It's stuck on the BL screen and doesn't even reach the rom's boot screen. Using TWRP 2.8.4.0. Is there an updated one for obake?

Try fully uninstalling magisk, reboot and try installing gmail again. Installing magisk broke many apps for me, even after a fresh install. SuperSu worked for me without FC's.

The 25/09 build works great. The only issue I'm facing is I'm unable to connect to networks with hidden SSID's. Not sure why but this has been happening with each build. Substratum works fine, root with super su works for me. Tried magisk and it turned into a FC fest. I rooted using super su...

This happened to me the both times I installed the rom. Both the 0901 build and the 0912 build. Gapps installation says successful but it doesnt reach to the end of the progress bar. All i did on both instances was to hard power off the phone (hold power button till it goes off) and turn the...

Did a bit of testing. Camera works, hotspot works. Still having issues connecting to hidden wireless networks. Amient display works, so does double tao to wake. Button swap also works. Seems fast, as fast as Nougat. Will let you guys know more after further use. This is the AOSP 0912 build btw.

I did a dirty flash. So far so good. Network drop issue is indeed fixed. Will keep testing. Thanks Sanjay!

Not sure if the stock kernel will fix the issues. Yes, if you format the SD card as internal memory you WILL lose your data. Best bet is to copy the data off it, format as internal and then copy it back on.

I also have this problem. Still, this is one of the best roms I've used on my OPX.

Honestly, I would suggest 1. wiping system, dalvik, cache, data. 2. flashing latest nightly.. 3. flashing gApps.. 4. reboot and let rom fully boot 5. go back into recovery 6. flash Arsenic kernel.. 7. reboot If you did it your way before and it worked out, then great. This is just a...

Known 7.1.1 issue. If you need root try flashing supersu from here: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703 On another note, would the ability to change the brightness of ambient display be returning in the future updates? Love this rom...

Nice update! Mobile data switching works fine for me. Also using arsenic kernel.

Remember to re-flash the rom you are using, in order to reinstall the original kernel. Then flash Arsenic R26. I installed it that way and had absolutely no problems.

the "V" gesture activates the flashlight as well.

When installing this rom I used pico gapps. What version of gapps are you using? Other users were having issues with other versions of gapps.

Play store works fine for me. What is the exact error you get?

It's in the build folder. Won't link it here as the dev already said those are test builds and aren't ready for release.

Flashed the 11/01 build. Tri state keys work, mobile data switches properly. Battery life is great. Will be following to see when camera is fixed. Thanks for this.

Thanks!

Did you still flash super su? I got bootloop when I did that. Try without super su.

Awesome! Thanks. Will install and test soon...

I'll test the speakerphone today. Also, if anyone compiles the rom with the LED patch for the droid mini, I wont mind a share. Thanks.

I'm officially using it as my daily. The only thing that doesn't work that bothers me is the flashlight. Video recording actually works fine for me. Device is a Droid Mini.

Installing now, will test and report my findings. Thanks for this! Been looking out for a while. Edit: So after using this rom for a day, I can say its quite stable for an alpha rom. It's fast, transitions and scrolling are smooth. I had absolutely no freezes, crashes or restarts. With some...

Flashed and everything is working fine. Droid Mini w/CM12.1.

Try 5.1 gapps from here http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330

What are the main differences between PAC and CM12?

The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.