Search results

so, having now V10 with Pico gapps - and it works fine :) no FC so far!

I'm having the FC issue with Google Play Services, too in V9! I tried it with OpenGapps, and with Benzo, and enabling permissions - nothing helps. If I enable network connectivity in the Setup Wizard on initial boot, then I cannot even get past the wizard as the FC does not allow me go beyond...

Problem solved for me - stiil used the GAPPS referenced in this thread. I used an extra wipe on cache and dalwik after installing the ROM and GAPPS which solved it (I cannot recall anymore, but it may well be that I wiped cache and dalwik only before the install - which is not good :) )

having the same problem. any other previous version was fine, but with 25 the same error occurs. did full wipe, had GAPPS installed, wiped cache, dalvik, whatever - no good.

Good idea with the FB beta app! Tried yesterday, still works fine :)

nope, the Facebook app force-closes since the beginning. just use the browser for FB. and I have to join the ones praising this ROM - it is awesome!

so after a few days of testing, one issue remains only for me which is annoying - and this is Bluetooth. since 4.2.1 it became "normal" that my carkit and the phone do not connect automatically (although are paired), but yesterday they even refused this ... I as tapping the carkit in the paired...

oh, so there's a solution on the way :) thanks!

... just tested GPS once more, now that the other problems are solved for me, but still cannot get a fix. the GPS receiver is found, but it sees exactly 0 satellites :(

did a full wipe - problems were still there ... tried reinstalling, and resetting and wiping in different sequences, finally after googling some forums it turned out that the solution is to install the latest gapps package made for JB 4.2.1 :) this solved the "gapps stopped" problem :)

have to add this to my problem list ... today I noticed that GPS is also not working for me with the Build 06. (04 was still fine). and BT does not want to connect to the carkit automatically, although they appear to be paired.

since Build 05, I experience some instability. Build 04 was smooth, it just got slowed down when the phone got online after a longer period of not being connected to the internet (I guess all deamons started to refresh / sync at once). but Build 05 and also, Build 06 have two problems for me: -...

I just had a short mailing with HTC support yesterday, and they assured me that although the update is in delay, it should come "Summer 2011".

take a look here: http://forum.xda-developers.com/showthread.php?t=523735

thanks a lot, man! this pretty much solves it - mines' also working now :D

yepp, the new 2.07 official ROM also flashes the radio. but that also does not help :(

don't do Task 29 - it has no harm on the phone, but it's of no use either... I tried it.

uhm, sorry, with my sentence on the LED I was not referring to the LED state while being in Android. I was rather trying to say that after going back to WinMo, its not just the display not wakin' up but also the status LED staying dark (althogh the phone charges). and since then: - I did a hard...

and... the LED is also not working

have the same issue as Star-Lite: tried Android, got back to WinMo, and now things are far from OK... phone starts up, everyting seems to be fine, but the 1st time it goes on standby and I switch it back on, the display is black! keys work, the phone itself is alive, but no screen... I use the...

you could at least tell us on which device you're trying to do this...

awwww, that's funny - it is in the list, but when you try to click Download, it's gone ...

as you also wrote, "similar" in quotemarks... - we don't know which camera HW is mounted in the devices (there can be cams from different OEM vendors even in the very same type of device depending on production series) - we don't know what post-processing software (with which settings) is...

I don't know where you were looking, for me it is still there: http://www.htc.com/europe/supportdownloadlist.aspx?p_id=250&act=sd&cat=all

goldcard alone cannot be downloaded. you have to generate it for (and from) your own SD card. the tool to be used is QMAT (revskills.de), which even comes with a user's guide - although goldcard generation is only available in the registered version!

digicams well, without going too much into the physics of camera sensors, some rule of thumbs: - the smaller the CCD sensor (for same resolution), the smaller the pixels, the greater the noise! - you cannot build a good camera without good optics / lenses. usually, mobile phone cams have very...

apps well, even if it is from SirfTech, all GPSs support the NMEA protocol. if the app you showed also supports NMEA, then this is fine. I normally use CruxView (attached), which is also quite simple, has some nice functions (+a dedicated SiRF section, which I'm not touching :) ) /edit: I...

no, you're not the only one :-) your method worked pretty fine for my TP2 also. used QMAT to generate the GoldCard, and the update went fine!

@Deiota the problem is that the "Internet push" option always relaunches opera. there's a thread somewhere here around about fully disabling this - which also gives you cca. 9 MB extra RAM :-) upd.: here's the link for killing opera forever :-)...

cab works thx go to Smaberg, as his .cab fix works :-) otherwise: the same for me, none of the downloaded hotfixes work for me, although I have an unbranded WWE ROM...

invalid vendor ID does not work for me either, on standard non-branded ROM. I guess HTC put out a wrong update ...

hello flywhc, will try to get Studio + SDK working... and will get back to you :-)

had this problem once: I switched on the camera, and then left the device on the table for a long time - so it went to standby. I could not wake it up by the power button after 20 minutes, but as an incoming call came, it was ringing with a black display, and I could answer the call with my BT...

ah, OK, that still has the old FM chip.

Touch Pro 2 hi beemerTPPC, I have a Touch Pro 2, with which only the basic functionalities work yet with flywhc's GFMAPI 1.6 (tuning with his test radio app but RDS not yet). now with HyperGPS (v7) even tuning does not work... driver loads fine, and I also see in the test windows the commands...

hi 2'NixorNot2'Nix, which device are you using?

broadcom FM @flywhc: I had initially some problems with my stereo BT headset which was working pretty fine with the Raphael - so I had to investigate this question and soon it turned out that HTC has now the Broadcom BT stack - and of course also the Broadcom BT chip inside. the BTFM.exe does...

radio app found!! well, I did some research in the Windows folder, and found some things: - there's a skin by default for an FM radio app (which is NOT the standard HTC radio), see attached. the skin has "Broadcom" on it! - there's another related dll called "FmRadioSdk.dll", see also...

that's sad. after setting to Verbose = all, still no messages appear (but I know that this station transmits even TMC data) I'm a bit afraid that having the Touch HD .dlls will not help us if the FM chip is another brand. it's not the physical address, but the different protocol! UPDATE: I...

one more hint: I guess the change behind the APIs and DLLs is really bundled together with the change of the BT+FM chip itself. in previous products it was from Texas Instruments, now for the Rhodium it is from Broadcomm. probably they supplied another API library for it. however, the broadcomm...

@flywhc: here's my feeback on my TP2: - used GFMAPI 1.6, new FMS, renamed Wrapper - old FMradio0.2 shows station name in the arriving messages - with the debug version I tried setting RDS from 0 .. 12, nothing happens, I always get SetRDS(n)=0. shall I try some higher numbers? and what shall I...

yes, HTC FM shows the station names correctly via RDS!

:( after I changed back the fms_api.dll (which was renamed from fmsdkwrapper) to the one from Blackstone, APItest says: "failed to init FM radio"

xFM shows also no RDS, but Mute works fine!

@flywhc: - APItest is still looking for FMS_API if I do not rename FMSDKWrapper - I set Frequency to 94800 (we have a local radio transmitting RDS and even TMC on 94,8 MHz) - there's no any number after RDS :( ( I can hear the music fine) - at poweron, when mute is set for the 2nd time...

GFMAPI hi yes, I copied the new dll into the PRadio folder (overwrite old one), with the old version PR did not even open. if you wish, I feel myself strong enough to help you with tracing / testing etc :-)

GFMAPI thread Hallo 6Fg8, have posted my experiences with Rhodium and GFMAPI in the other thread, flywhc released a new version, but there are still some problems with PowerRadio. hast du ein bißchen Zeit, könntest mal da auch reinschauen :)...

so, I made another test with PRadio 1.2 - the situation is somehow better, at least the scanning works, and I have stations, but still, no RDS info is extracted at all (I have full fieldstrength) and upon exit, the app crashes and leaves radio on. and Mute does not work from PRadio (it works...

Yesss :) wow, - copied your new version to my Rhodium, - copied FMSDSKWrapper.dll to the same dir and renamed to FMS_API.dll --> and it worx!!! I mean, both APItest and XFMradio are working (even Mute)! Good job ;) @6Fg8: PowerRadio has some problems: - have copied the new DLLs to the...

Rhodium @flywhc: I get the same errors both for APItest & XFMradio on my TouchPro2, even with v15B of GFMAPI I noted that Rhodium has an other version of FMS.dll in the win directory than what was posted on the 1st page (and there's no FMS_API.DLL on the whole device). The "ported" HTC FM...