Search results

I just flushed BrokenOS 4.2 (MM) and "CM_HAL_MOD (Lollipop & later) (Stable)", Picture Plus and Superzoom don't work. They can take pics but it's just normal pics, not 24MP or 50MP, did I miss anything?

My bad, problem solved.

I'll try that, thanks a lot!

Every time I open Synapse it shows "check" and "X" buttons, I tried both buttons but they're still shown next time I open Synapse, what should I do to make it disappear?

Thanks real_pac , I thought since min frequency of CPU 2 and 3 is set to 69 Mhz, it would use this frequency. Good to know how it works exactly! :)

I think it's in MISC, VTG, but I've never changed this one, so I don't know if it works properly.

Apparently it's designed to work this way: In Synapse, restore a selected profile, Synapse crashes, reopen Synapse, press the "X" button on the top, done :)

Thank you! I'll give it a try.

I applied 220v1.3 last night and went to bed, the phone was mostly in deep sleep mode, when I check the status today, it shows that CPU 69Mhz and 146Mhz are unused, is it normal? Another problem is that I can't set "Max Compression Streams" under Memory tab to any other value but 1. I can...

Thanks! I did what you said, press X when reopen Synapse. Still, seems some of the settings weren't loaded properly. E.g. After pressing X button, I checked CPU Multicore Power Saving setting, it was Disabled. In real_pac 's screenshots this option is Enabled. Don't know if there's anything...

Ehh...after Synapse crashes and I open it again, I press the "check" button....so I should've pressed the X button instead?

Hi real_pac, I just saw that you put screenshots of Synapse settings, just want to confirm that the values in the screenshots are the applied value right? I'm using CM12.1+AK 213, thanks! Edit: The reason I asked because Synapse always FC after I press "Restore Selected Profile" on my OPO, so I...

I removed DocumentsUI since I have Root Explorer installed, and it causes Snapseed 2.0 FC.. Put DocumentsUI back fixed the problem, I don't know why Snapseed couldn't call Root Explorer to browse photos.

Thanks for the tip, I restarted MyAndroidTools and the restore finished in 3 minutes. I'm using OPO+AK v140+CM12.1.

Hi real_pac , thanks a lot for sharing your optimization methods, I'm using MyAndroidTools to restore your backup, it's been an hour, the MyAndroidTools logo is still spinning, I'm not sure if the process's hung. Usually how long does it take to restore your backup?

Edit: Since real_pac started a new thread, I'll post my question there.

Cool! I'll give it a try. My opo never had touch screen problem on ColorOS, I flashed CM12.1 last week, since then it's been really annoying because of the ghost touches, thanks for the tool!

Upgraded from 0404 to 0406, double tap home button to switch off screen doesn't work very well in 0406, now I have to tap home button 3 times in order to switch off the screen. It's like the first tap is to activate that area, and then the next 2 taps switch off the screen. Anyone else has...

Probably a silly question...I'm using 0404 version with AK kernel, if I flash 0406 version, do I need to reflash AK + UKM and reinstall Synapse?

Thanks for the great ROM! I flashed 0404 version yesterday, so far so good. Only noticed one thing, when I use gesture "V" to toggle flashlight, the "flashlight" tile in Notification Drawer disappears, so there's no way to switch off flashlight, I have to reboot the phone.

I flashed the new radio on cm 12.1-04042015-unofficial, it always shows no signal on the status bar, but wifi and LTE both work, strange.

Does this rom have the stock Color OS camera app which is much much much better than CM camera? I tried both CM11 and Color OS, the pics taken by Color OS camera are super clear, this is the only reason that I'm still using Color OS.

Thanks! I'll give it a try, fingers crossed~~

Thanks! I'll have a look, will try to do the same on my opo, hope it will work on mine too. I want to try the franco kernel, but I don't know where I can get stock CM11S kernel, just in case I want to flash the stock kernel back later.

If you're talking about the yellow hue at bottom of the screen, it's not kernel-related, it's the screen OPO uses, lots of complains in China. OPPO Find 7 uses the same screen so Find 7 has the same yellowish hue problem too. Although, I'm still curious...What did you do to make it almost...

Looks cool! I'm on XNPH25R, wanna give it a try. Where can I find the stock XNPH25R kernel in case I want to flash the stock kernel back? Thanks!

That's strange. Although, on this page, it shows that OPO does have a gyroscope. http://oneplus.net/one#specifications

That's the right thing to do. In China the 16GB model isn't popular either, even in their flash sale no one wants the 16GB model, while the 64GB model usually sold out in just a few minutes.

New to this rom, flashed it this afternoon, so far so good, thanks for cooking and sharing it! I'm not sure if anyone else sees this problem, I installed the new google camera, the app crashes when I click either "front camera" or "rear camera" resolution in settings.

Check this one out, from Nexus 4, no FC on settings. https://dl.dropboxusercontent.com/u/6784939/shared_p%20refs.zip

Are you able to enter settings of this new camera app? I installed it on my N7000 and can use all features/modes, but whenever I click "settings" icon, the app FC.

I'm downloading 0330 build, but it's extremely slow, about 20KB/s. Edit: Now it's completely stopped. I'm new to Carbon rom, the downloads is always slow like this or just today?

Have downloaded and flashed 0227 build, how pathetic am I :p

Thank you so much, it works, now I'm on 0225 build! :)

Yeah, I also tried 0224, same systemsui error after flashing. I'm rolling it back to 0223 for the moment and will wait for future versions, 0223 is good enough for me anyway :)

Upgraded from 0223 to 0225, keeps giving "the process com.android.systemui has stopped" after the 1st boot-up. I've tried to flash it twice, same error. Anyone else sees the same error after flashing 0225?

Flashed 0219 just now, on my device it seems Double tap status bar to sleep feature only works once after a boot-up.

Signal issue +1, although I think it's only a display issue because I made few phone calls when it shows "no signal" and it worked perfectly, voice was very clear. Another problem I see is that OmniSwitch sometimes set to OFF by itself. Don't know how to reproduce it, I just use my phone with...

Settings for CPU governor and I/O schedulers in Performance lost after reboot.

I Flashed build 1227, standard kernel, made 3 full backups in TWRP, all good, no crash at all, thanks a lot Chasmodo:good:

Just want to share a quick note about TWRP stability on my note, I've tested TWRP backup in the following Asylum builds: 1217 good 1218 crash, 402 MB data backed up. 1219 crash, 402 MB data backed up. 1220 good 1222 crash, 402 MB data backed up. 1223 crash, 402 MB data backed up. 1225 crash...

Easy to use, fast, slim, most importantly, responsive! Better than all other quick launchers I've ever used, good job! Would be nice if we can backup/restore settings and targets using Google drive. (Or even just save settings/targets locally)

It's the same with the one in 1219 rom. See post #11028.

I had the same problem this evening when backing up 1218 before installing 1219, except I didn't turn compression on. TWRP crashed twice, the 3rd time is showed "backup successfully", but the backup was only 410MB. (usually it's 1.7GB) Anyway, not a big issue for me since I have full 1217...

I'ved tried both and my choice is stock asylum kernel.

And will there be a special B day boot animation in today's build? :victory:

Do you need to pull down twice in immersive mode in order to see notification panel? Wonder if there's a better way to do so.

I personally don't notice any major speed difference (for now). And I'm using xposed + greenify, so I'll stick to dalvik for a while until xposed supports ART.

Waiting for Asylum_Omni_4.4.2_20131213_n7000.zip, 25MB on the server so far LOL

I'm in Shanghai...In your case, honestly I'm not sure if it's worth to pay for a new mainboard and international postage. The mainboard costs about $33 USD, plus international postage, around $40 - 50 USD depends where you are. So total cost would be around $73 - 83 USD, while a new U950 costs...