Search results

This is a newer version of Touchwiz, from Note 5. It has new features and but isn't stable as Aryamode 8.1. So if like testing and some bug are not a deal breaker you can give a chance. Otherwise, you should stay in V8.1.

Hi! If you are using Delta Gapps, there is Google Contacts addon. You can found that at the botton of this thread: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368 I did have a problem like this. First installed this addon, then it works after...

Yeah, bad signal can be the source of , at least, part of the battery drain. As stated in OP, you need to follow the instructions carefully. Maybe this problem with null Imei needs to be solved first. I can only presume that you haven't backed up your EFS partition. If that is the case, I can...

Thank you for the quick reply. So this is my first attempt with custom rom on note 3. I had 4.4.2, n9005vjugni1 before and my attempt to install was over mobile Odin. So, I finally got this rom installed. I can't tell for sure, but I guess my problem was with Mobile Odin. There is a option...

Hi! Thanks for your work tkari! I have the same problem. After install bootloop on recovery. I noticed that this option, "update mode", appears on first option screen, on Aroma and then again on secound screen. So, I ticked "Update on first", since I wanna keep my knox 0X0 status, and "install...

Snapdragon here and I have 2,71 gb. Image attached

Root, by itself will not bring such results, but things that root allow you to do, maybe can (improve or not your battery time). You can perform a debloat process, this can improve your battery a little; you can change your kernel, this can improve or reduce your battery time. Well there is a...

Are you sure about your cell phone model? Note 3 do not uses the "i" letter on model. Isn't "N" instead? (I was looking to the title of your post, nevermind) Here I get 2,71 gb for total amount of RAM. You can try that factory reset option on recovery. There is no way to replace RAM on soc...

Worked here! Rooted successfully and still knox 0x0. It's VJUFNG3 kernel version

Worked! Thank you, A.S._id! Worked fine here. :victory: First I tried running as Administrator, didn't worked. Some message about "not found" something. :p Then I tried just clicking on .bat and worked! I had to do it again, cause my note was lacking of Busybox and, as result, there was no...

Hi everyone! I was flashing this new Kernel from Fosser2 (Kernel 3.1.10, from last DRH rom) on old roms, like DRH ICS. It booted, but I have no storage. Someone managed to make this work, or know how to make storage work? Sorry for my bad English!

I got 10155 on antutu. Pristine XXLT5 v3.2 + HydraCoreNirvana n10 (Pegasusq + sio) I choose 1400 max Cpu. On 1600 Can be better! LOL

This Kernel is awesome. Thank you Maxfu! Look at my score on Antutu . LOL On Quadrant was not that good. Well, I selected Max cpu at 1400 (in aroma installer), but some times it reaches 1600. Maybe this behavior makes quadrant score kinda of low, weird. Like the app uses some command to reach...

Or you can use this app http://forum.xda-developers.com/showthread.php?t=2137598 and you can flash kernel and CWM at the same time (both are in this zip. Is that kernel.bin.md5. First you have to extract that file, then,on this Universal Kernel Flash, you select that file extracted before . This...

I do respect your opinion, but I disagree... Rules are made to prevent kiddos doing wrong stuff. But, we are no kiddos. You know better what to do...

Never ask for ETA ! It's a rule...

This was my first thought. Can you indicate what version are you using to work with this script? Even so I will search on XDA and test later... Thanks for the atention!

I checked this now, Smanager was allowed on SuperSu. Still same output: If icon of root is marked before rum script on Smanager I get that error. Seems something about root check in script. Can be My busybox, I don't know... Thanks for the reply

With terminal emulador: "sh: applet not found" With SManager, first: "Current value is " " and was expected "GT-I9070"; then I marked the SU icon before execute the script, this time the result was that screen, that I can't understand. I will attach.

So, someone managed to make work this script? I don't know what is messed here, but no success at now...

That APK can help people that are afraid to mess with dd. I can't blame them! Well done Chainfire! Thanks to report digdarsan!

Thanks for share your script! So, can I ask what the script can copy? I mean, can you specify what it does, what it will backup, what it can't ? To be more clear, It can backup everything, even the bootloader, so we can flash all stock again? In my country (Brazil), Samsung called that phone...

Just reboot! Like reset of a motherboard from pc... you know?

That is the whole point. This area is only for Development, not educating. There is other areas for questions and general stuff... This is why all experienced members are asking to people like Sami Kabir to post there and not here. This area is for devs posts and debates. Rookies must only read...

Try home + power for 2 seconds. Someone reported that worked that way...

As we all know, all that info are only rumors. So there is no need to edit the first post, I guess. I have read some other informations in other forum, here on Brazil. I mean, if arkhan11 get to change first post for every new rumor, this will be endless. I suggest to leave First post like it...

Not that much... Sammobile Isn't A Samsung official channel. Look what they said in their site on "about us": As I see, they are close to Samsung, but can't talk in their name. Still speculation, with some information form inside, I guess. I am just guessing. I may have mistaken some...

Well, if you have 0, you will care about it... I do care...

Actually it has a windows version. Even Mac has a version of Heimdall. Take a look: http://www.glassechidna.com.au/products/heimdall/ Indeed I can't make it work... Perhaps on windows x86 it can work...

I have tried heimdall but I can't make it work on Windows (7 X64, it never get to comunicate between pc and mobile). So when I was messing with my rom I have to try zillions of ways to make a image to work with Odin. In the end, make the image with ext4_utils and compress with tar on my virtual...

I really suspected that, like you said, part of all that stuff was unnecessary. About the place of su binary, well, I just wanna to help. I don't know nothing about linux and less of unix. But normally, while you are dealing with this kind of stuff, you should try. Cause things sometimes work...

Hi Tom! I managed to root my s advance with this method, but in guide that I have read, was said that I should put the su binary on "/system/xbin/". I used that steps, by Xanonus. Over here everything gone right and after flashing, I got Supersu from Play store. If help you, please thanks...

Yep, you are right. After some time I can use wifi speed normally. I am downloading Dead Trigger update right now and happens right like you said.

I think mine have same problem with wifi. I Should test more...

I am testing this right now. That way: the boot.img from Tjohnson's inside that zip (this aokp) and flashed... With antutu, there is more score on tjohnson's rom (I could get 8K). I have tryed Nobe's rom. Didn't boot. Even the boot animation won't showed. Well, I am addicted on benchmark...

Hi! Thanks for the rom ! I was testing. I can't overclock. With Settings or System Tuner I can't change the frequency over 1Ghz... The slider won't go across 1ghz. Weird My fault, just needed to make the gesture right. Running on 1.2 ghz!

Same here. Yep, I miss all that options and stuff too... but the performance is amazing! 1.5 GHZ ??? WHAT?!?!? 8k on Antutu. (LOL I am addict on benchmarks. Need help! Ho my God!! :p ).

Now I see your point... Indeed, if you ask me, without think about, I can say that I wanna save come Write/erase cycles. But, well, aren't we already spending that very same cycles on the system partition, that seems more essential? Well, in the end I don't know nothing, probaly saying...

I Don't wanna be lame, but here is I thing: Well, I can say that if the people can read, and if they exercises this ability, all that talk would be avoided. On the first lines of the topic, there is: So, if you flash this you agree with whatever it comes to be. That is the rule of the whole...

Man, to hell with that birds! I like animals but, you know, There is other things... That boot logo from Black Jellybean is gold!! Well, for me that APK solve the problem.

Hi! Thanks for the Guide! I don't know if I am doing something wrong, but I can't make it work. Every .odex file give me a error, so delete every odex will not help, I guess. Have you or anyone tested this guide with our firmware? (original 2.3.6, Only root). I was trying to deodex, so I could...

How about here? www.sammobile.com/firmware/ You will need to register before download. I guess this is your firmware: http://www.sammobile.com/firmware/?page=3&model=GT-I9070P&pcode=SEB&os=1&type=1#firmware

Perhaps because the file build.prop from the rom brings such information. That is a configuration file, a text file, and you could put whatever version you like. That string will be displayed on settings/about phone/android version.

Here work good on kies, but not with the last version (of Kies). If I update kies (image attached) then I can't connect my phone. My version is 2.5.0.12094_28_8. There is other thing, I used other way to root, that related by Xanonus

Sami Kabir, can you give more info? Like If kies give you some message, or if Windows show you some window or message. There are somo know problems about kies and with more info we can figure out...

What?!?!? It's magic ? Anyway, my benchmarks are always bad. My database IO never cross 90 points on antutu...

I don't think so. Still same kernel from Fosser, so same hardware stuff that don't work! BTW, this rom seems very nice! Still in test. Thank you tjohnsonjr! Sorry for bad english

I have these log, from system tuner. I don't know if it can help, but here it is. The game is dead trigger (version 1.6.0). The symptoms are normal gaming, then suddenly screen begin to flicker. You can realize that the application still runs, you can hear the sounds and actually you can...

Well, as I suspected... I will try again and then report.I have deleted almost everything on system\app. Thanks!!!

Well, on playstore, you can use the capacitive button (that between back and home) and then select settings and uncheck "auto-add widgets"