Search results

I'm using the standard Qualcomm hotplug. I'll try the intelliplug and will report if it has a different behaviour.

Thanks for the update! All good for me except since 1.0.6 some CPU governors like interactive or intelliactive make my tablet freezing and I have to hard reset it.

Damn'it. Too late. ;) What s the issue ? Will revert to 1.0.4 but I ve had no problem so far with 1.0.5

Thank you for the update! KSM hasn't been proven being very efficient on other ROMs I've tried on an other old device (Galaxy Note 1). It's quite power consuming and doesn't save much RAM in the end. ZRam is IMHO more efficient in that matter. But I'll give it a try and disable it if I don't...

What about that bit in the config file ? #SOFTAP Channel Range selection gAPChannelSelectStartChannel=1 gAPChannelSelectEndChannel=11 #SOFTAP Channel Range selection Operating band # 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND gAPChannelSelectOperatingBand=0

So far so good with the 1.0.3 Custom kernel. What about implementing F2FS? http://forum.xda-developers.com/showthread.php?t=2697069

Do not select max brightness but completely disable screen filter. I had the same issue in the past until I found out that this issue was caused by the screen filter app. As long as the app is running, no matter the brightness level, you will get this issue.

I meant the LG stock you provided as a restore. Just tried this ExFat kernel and My 64Gb SD is back again! Thanks !

Hi ! I just flashed the 1.0.1 Custom and I don't have access to my external (FAT32 64Gb) SD card anymore. If I flash your stock kernel, I have access again. Anything I may have missed? I have the notification that the SD has been inserted but I have no access to it and it doesn't appear in the...

One can also use the "free" command in a shell to get a good idea. Keep also in mind that the ROM is using Zram. Could it be the cause of the issue?

Edit: Sorry for multi-post. XDA app issue :/

Sorry for multi-post. XDA app issue :/

My favorite would certainly be gamma fix. Then undervolting as a second one :) This was implemented nicely in KK custom kernel. I hope that it is not too complicated to port it to the current kernel. Many thanks for your work !

I m currently doing some evaluation on my battery life with the latest ROM. I also have the feeling that it s less than the prvious one. I have kept a backup so I can revert easily ; )

BTW it seems that big changes on the tasks scheduler have been made. None of the tasks managers I have are working any more. They show neither background nor foreground/running tasks.

That's why I'm suggesting (to the dev ;) )CUSTOM undervolt option. One can adjust live the voltage of each CPU step to lower power usage and still remain stable. I had this option on an old ROM and I had no stability issues with a few mV below default voltage which is quite conservative to match...

I very recently had an issue with battery life. After clearing Google service data, it all came back to normal. When the data network was ON, my phone was barely entering deep sleep mode. Didn't google silently updated this piece of software?

IMHO, custom CPU undervolting would help more that 14 steps.

I would say if the battery has never been replaced, it s about time to replace it with a genuine 2700mAh Anker battery. I m getting up to 4.5 h on screen time with it.

I use Network Monitor mini.

I found my phone quite laggy but at the moment I'm running a single 300Mb zram instead of a dual 150Mb one. Only 1 core is used to de/compress data, leaving the other one free for tasks like running an app. Batterywise I'm getting about the same on-screen with or without zram.

System setting/display & lights/LiveDisplay/color calibration. To check I just compared the results with a descently good screen.

Good news ! What do you intend to implement in this kernel ? Gamma correction ? OC/UV ?

I'd rather go for undervolting than overclocking ; ) ---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ---------- Can you tell a bit more about that black clippimg fix ? Is it a kernel patch ? Even though the gamma curve of each RGB is not correct, I m getting a...

Didn t try adaway but adfree is working fine for me. I just had to uodate de database (hosts) after flashing.

Likewise. A lag from time to time but nothimg to compare with cm11. You ve done a great job with your ROM.

No it was in Europe. I'm sorry for you that they don't have the same policy in India. ---------- Post added at 09:42 AM ---------- Previous post was at 09:35 AM ---------- @bauner Any plan to switch to F2FS in a near future ?

Flashed this ROM today over my rooted stock 20b ROM. All working fine. I was just used to a better gamma setting with the custom kernel I had installed. Any dev working on a custom kernel for this ROM?

I bought a single Anker battery on Amazon. It's doable..

With my new Anker 2700 mAh I can get up to 4h30 before reaching 10%. That s without zram but with KSM. However I agree with Bauner that, in the case of Android, the memory saved is marginal.

Got a 2700mah genuine Anker and I m very happy with it.

Did that and all is working fine so far :) Sill a bit slower with color calibration than without but to an acceptable level. Over time I find that the phone is getting slower and a reboot gets it back to full speed. Could it be due to a memory leak?

I will do this and will report if working fine or not regarding the google plays services issue. As per the broken Wifi, I recommend again, when coming from a working ROM, to make sure that the WiFi is turned OFF before flashing the update. Thanks for all your efforts.

Except the Wifi issue, I have the same problem after a dirty flash (Google play services has stopped working). Seems like there is no choice but to do a clean install... I pay attention to always turn off the Wifi before flashing a new ROM. I've had no issue with the wifi by doing that.

Hi Bauner. I just (dirty) installed the ROM zip over the previous stable NightOwl ROM. I will try again with flashing the Gapp package (which is already installed) after the ROM zip. By the way, the "performances" setting has disappeared. Normal?

Hi! Juste tried to install the latest 20150708 over my previous NightOwl ROM (stable version) Did a ART cache wipe before reboot. Got 3 or 4 times on boot a message telling me that Hangouts and Google services have stopped. I tried another reboot after clearing the google play services cache...

I bought an Anker 2700 mah battery and it's perfect. I'm getting close to 4h30 min of on screen time. Be carefull with cheap fake ones.

Sorry for the late reply. Here you go. https://play.google.com/store/apps/details?id=com.nema.batterycalibration ---------- Post added at 01:10 AM ---------- Previous post was at 01:05 AM ---------- Great !! Is it with this rom that you didn't notice any slowdown after color calibration?

True. It IS causing a slowdown. But 1/ I like having a calibrated screen. The green hue is horrible 2/ Thanks to your job, the slowdown is less noticeable with the test kernel. ???? ---------- Post added at 06:40 AM ---------- Previous post was at 06:38 AM ---------- Did you try the...

I indeed made the swap file on the internal storage which is normally vfat. Will try on sdcard1 or on the preload partition. Thanks for the hard work. It seems that the test kernel is a good base to work on.

To be more precise, my phone was laggy especially when leaving an app when I was using color calibration with the default kernel. With this test kernel, it is NOT as responsive as when I'm not using color calibration, but it is many times more responsive than with the default kernel.

What I dis: dd if=/dev/zero of=/storage/swapfile BS= 1m count=256 mkswap /storage/swapfile swapon /storage/swap doesn't work. On the plus side tho, my phone doesn't slow down when I use color calibration. So thumbs up for the new test kernel!

Is the standard swap on the 20150629 kernel available? I've installed it (without activating KSM and Zram) and tried to use (for test purpose) an old fashion swap file. It didn't work.

So there is hope to get a personally calibrated screen without slowing down the phone in a not so far future ! I'm on 20150613 at the moment with the standard kernel. Many thanks for your hard work. As a side note, I used the following figures to calibrate my screen R 100% G 83% B 95%

Same here. I was happy to be able to calibrate my screen and get rid of that green tint. But using live display color calibration is slowing down the phone to an unacceptable extent. It's either a fast phone or a calibrated screen but not both :( Any reason for this?

Automatic mode is working for me as well but it definetely doesn t go all the way up when in direct sunlight. There was an editable curve on CM 11, any chance to get the same on this ROM?

Same here with the MMS issue. I check the MMS configuration (APN & stuff ok) and tried with both the standard app an Textra with no luck :( I'll double check again APN and will let you know.

Hi all. I've been giving a try to this ROM for a few days now. Given the challenge Bauner had to face, it's an excellent result. I find it much more stable than CM11 on my good old Note 1. Something I haven't found though is how to change the screen mode from the default dynamic to something...

Edit: Disregard. error.

I just checked the mount options and it is not mounted with discard. Good news that it is trimming anyways. I just repartition mmcblk0 to extend /data by a few Gb. I had 200mb left and I think that even with trim enabled, it was causing some lags. It's easily done with adb in recovery mode and...