Search results

LG uses the other standard named SlimPort that work without external power and is micro-usb to HDMI directly. MHL needs power from external source to output to HDMI and it does not work with our phones at all

Manual camera shutter speed on other apps (like Proshot or Camera FV-5) it is limited yet to 0,6 seconds in this update?

You have to uncheck the mount namespace separation in supersu app on the two devices to make Titanium Backup method working. • Uncheck that on the rooted device without xposed which can login on snapchat. • Uncheck too on your device containing xposed installed Make a backup of the first device...

The wifi hotspot is not working anymore after rooting using the rootedsystem.img for V10c. I install xposed after the root with flashfire without problems. If there is any solution i will be grateful.

I have a G Flex 2 with the same dead pixels but in other place, on the lower side of the display. There will be no problem because the pixels have already been burned from the factory. At first it annoyed me but with time of use does not bother.

Timeshift Burst photos when open on album doesn't work, already clean camera and timeshift burst data cache and the problem persist. Beyond that. The best rom so far and thanks for your work niaboc79

I can test your kernel to see improvement if you already said that. Im in eXistenZ ROM now. And Thanks for your work always. :victory: Regards

Aleatory Reboot with this kernel on eXistenZ KK rom. The same issue i encounter with this kernel for 4.3 stock and other roms.

Is possible to flash a E988 Indian Baseband that contains a triband (850,900,2100mhz) to dual band E988 HK (900,2100)? Can the 850mhz band work with this method or is hardware imposible?

My question is that the i9500 motherboard is compatible with i9505 componets, for example, camera, AMOLED and Touch, IR Sensor, front camera, usb pcb, etc. My i9505 MB doens't power on and i need a replacement board, it doens't matter if i going to buy a i9500 board, but i don't know if itself...

If i flash V3 - 20140111_mira03_aosp442r1_maguro-update-signed.zip on Galaxy Note N7000 with CM11, is there a chance to work? i see too that you have uploaded a Supernexus ROM with these patches for SII GT-i9100, and the Note have almost the same hardware inside. regards

I test it with Galaxy Note N7000 and works very well. Thanks @ Sejk97 for this app.

jajajajajjajajajajajajajajajajajaja +1

I'm using your new build now @frantisheq All is working fine as Beta 7 and previous build Changelog? (Wifi Direct isn't working :( )

Wifi Direct actually doesn't work, does not permit or change the device name in wifi direct settings and doesn't find any other device.

Frantisheq build works awesome as herna beta 7, these two roms are stable, ART mode works too, anyone knows if wifi direct or wireless display works or is gonna working on KK? For miracast sharing. I have various Rockchip and WonderMedia miracast dongles to test it with the N7000 some day.

Really, the @herna kernel on CM11 beta 7 has CWM instead of TWRP

Google+ app causes this, heats the phone and make it slow due to cpu throttling, uninstall it and you'll be thankful

Glad to see you again @bangsti:cowboy:, having one of the best roms i used (JellyBeer 4.33) installed months ago, im sorry for never telling you how grateful i am for all the support you gave always to us.

In the future this kernel could have a option to undervolt on kit kat? Sorry for the question but thanks for your awesome kernel. Sent from my GT-N7000 using xda app-developers app

can you add 2G/3G toggle and CRT Off effect for XXLTA release?

Thanks Robbie Hood, your roms still prevail and are the best ! i remember when i use your roms on I9100 years ago, now waiting for latest version on N7000 and hope going for more Greetings from Paraguay

USB tethering works on 4.33? anyone knows?

USB Tethering doesnt work on 1.4.3 even on 1.3.5 :( Is there a solution for this? I'm on Jellybeer 4.32

With the latest version is stable again. Thanks a lot Neo. Jelly Beer 4.32 ;)

Bootlogo Stuck Hi Neo. First thanks for your kernel. Is the best so far for every CM, AOSP ROM. ;) Only from the version 1.3.9 and up (1.4.0) there are problems. If i power off or pull the battery, when i power on again it stucks on bootlogo, cannot enter in recovery, have to use Odin, flash a...

Video app and Radio doesn't work but thats all, JB is more GPU demandant than CPU, if you can make a 350-400 mhz or 440 mhz gpu oc will be of great help. Thanks again ;)

Thanks C.O.H. Your kernel rocks :highfive: Makes a JB TW experience a lot better

Is there any chance to make a option in your kernel to change the GPU frequency/overclock? Like Siyah kernels on the Galaxy S II with the same Exynos chipset. For more smoothness on Jelly Bean. Thats the reason why Mali400-MP4 is 440mhz overclocked on S III - Note II vs 266mhz in our Notes Regards

JB Leak app camera problem Hi Jobnik, the camera app from this leak have a problem, the autofocus when you record a video is absent and the white balance is not working too, even on a low resolution or 1080p is not working. but with the latest camera app present in the latest official XXLSZ ROM...

Thats what i do ever. Is my only solution to not lose all data. just needed to know if there is a solution to this problem :( I hear that LS7 Leak does not have that problem. Well thanks for all replies

Why when my device freezes or something else and decide to remove the battery and put it again, result at stuck on Samsung Galaxy Note screen? This only happens on JB Leaks. There are 2 only solution that i know. -1st is to wipe data/factory reset in CWM but that makes to lose all data. -2nd...

do 3 factory reset and then format system, format data and format preload to work. if you do only once, it have that bug. Every LSA ROM have that bug if you are coming from LS7 or ICS builds

JB SamsungCamera With "Low Battery" Msg Disabled Yesterday i mod the .apk of the Stock JB XXLS7 with "low battery msg", "cannot use flash" disabled and use volume rocker as shutter.

If i install the drivers of Chainfire, when the devices reboot, it lockup on bootscreen :( Need to wipe data or reinstall the whole rom again. any fixes? Regards...

If this ROM is Hybrid, The Stock Samsung Camera Works? or not?

#! /bin/bash echo "OEM Unlock Bootloader" echo "DONE" https://twitter.com/ibarrarodoo/status/246817718186160128

Lockscreen and "RR" icons Is there a Theme for 3.0.6 that contains the default "padlock" icon on the lockscreen and to remove the "RR" icon in the status bar and put the original "settings" icon itsefl? i have no time to make myself :crying: i already see this post that contains step by step...

Is someone that can post a diferent link to download the 2.9 rom? only if someone can. mediafire,4shared, another link. jokersax.com doesn't work for me :(

Camcoder isn't working with other kernels :( (even with other programs on the play store if i download) only works with the kernel that came with this rom, i install siyah lastest kernel and older versions and no solution :S N.E.A.K have the same problem, solutions? Regards

Download Link Doesn't Work :( (Jokersax.com problem) is just a blank page

Is there a APK mod of the ICS Samsung camera app? to remove those limitations of ''can't use flash on low battery'' and ''can't take photo in extreme low battery''. I don't want the ICS Stock Camera app, the photos are better on Samsung camera app than the stock one... tested. I Find only for...

What happens when you actually flash a AT&T .91 Radio over a N_01.100.00R? it unlock the capability for HSPA+? Better Battery Consumption? All Answers are welcome All i know is that the Atrix 4G is 3 Bands for 3G connectivity HSPA+ and uses the Qualcomm MDM6200 chip and the international, HKTW...

i already added my wifi settings in ip-config manually and doesn't work, my password is only WEP. i already read about that the bluetooth is integrated with wi-fi chip, and yes... my bluetooth works perfectly, i used CM7 with franco kernel, is the best thing to this phone :D but only when i...

With all roms are the same, i update the firmware with B136, B138, B160 and B162 (stock roms) and already with oxygen, void, CM7 and MIUI roms with custom kernels, full wipe,etc... i sell my Xperia X10 mini for this phone :( it has the potential, overclocks well @ 1.5Ghz but the wifi doesn't work :(

I not play games, i only write as a example that goes hot like you play games... only that... and the error is this... in the configuration settings --> Wireless and network settings imageshack.us/photo/my-images/600/turningonwifiu8800.jpg When turning on...

my device only when enabling the wifi, goes hot in the downside at back of the phone, as when you play n64 games... and gave me wifi error in the wireless settings... is a hardware problem??

Is not the FM radio... my wifi is not working, giving me error is the AMSS then? i flash the B162 firmware from huawei, is the latest chinese firmware/rom available, i cant find the B138 (Global latest Firmware available)... in the build.prop is a string that says... "wifi_hw_is_bcm=true" or...

Can I get a pm for the B138 ROM too?

is the possibility to flash radio images to our U8800 like the HTC Desire Z for example? i have wi-fi problems with it,... even not turning on with diferent firmwares and diferent customs roms. its giving me error when turning on wifi :( i read in htc devices that can fix problems of wireless...