Search results

escuse-me, what did you not understood? - the Working only on kitkat and below part? - or the oneplus one thread? PS: can devilsshadow or a mod lock this thread?

Actually, i wrote "Tested only on kitkat and below" but it should read as "Working only on kitkat and below" as 1+ has locked NV write ability and rmt_storage patch was a file from old version from before they patch NV... File witch, just in case, changed drastically in later android versions

just like energy bar (good alternative to TEAM battery bar btw), the only way for me to install it is to use alternative store or apk, on play, it shows app as incompatible for my 1+1 and LOS 15.1 (android 8.1)

Sorry to dig this out but if anyone still have latest stock firmware for this P2-6011, can he upload it somewhere on the internets and post link here? Many thanks.

the "patch" was actually an old version of the file from before cyanogen team add the "reset nv values at boot" functionnality. see the commit witch add this "functionnality" if you have sources for your model and plan to edit and build your own version...

This was why we had to patch rmt_storage on 1+1: in order to prevent nv recovery on reboot.

LOS 15.1 is no longer available at official website, all links got replaced by LOS 16. Since LOS 16 is not supported yet by xposed, does anyone have a download link for the last official LOS 15.1 ? Many thanks =)

maybe... an unlocked band can properly work only if it's supported by the hardware (especially true for the 700MHz band where it need a different antenna)

As yakapa40 shown on his screenshot, the value is corresponding to the result of the list of bands in binary, translated in decimal. For example, decimal "517" in binary would be "1000000101" meaning having LTE bands 1, 3 and 10 because when reading from the right, the 1st, 3rd, and 10th digits...

If you have this problem with your 2g/3g/4g connection, you need to be root and have a terminal app: in terminal, get root privilege: su then check your actual DNS: getprop | grep dns check for these lines: [net.dns1]: [whatever] [net.dns2]: [1.2.3.4] To get rid of the dns probe finish bad...

Hi HootanParsa , I found a MiXplorer on gplay (com.kabum.mixplorer), can you add a line at OP about it? if it's yours, if you suggest XDA over it, etc.

Lower frequency bands require physically larger antennas, especially below 1GHz where the impact of antenna size is felt the most. The antenna in our 1+1 is just not good enough for these frequencies...

LTE 800 (and 700 btw) requires a different antenna than LTE 1200+ or 2G/3G so even if chip and AMP support band 20 and we enable it's use in QXDM, we won't be able to get any signal since there's no antenna to receive it properly.

was writed in addendum, lte800 is not possible due to hardware lack (antenna).

Hi, is it possible to tidy up the project page, please? basketbuild link and release tab have no latest version latest version found on androidfilehost is 20151002 but changelog stops at 20150510 PA dropped the project but does the unofficial version here continue or is it stall? Is there any...

"There doesn't seem to be anything here. You're trying to view a link that does not exist." Any mirror somewhere?

Nope, 1+2 is an x64 system so current rmt_storage patch does not works, also, there is the problem of the modem diag mode access that has been locked since lolli.

values restoring themselves are a déjà-vu: NV write ability restrained and the found solution. My guess is that it can be retrieved using either IMEI or an hidden value in modem fw. Anyway, nice work!

well, sorry but for me, holofied play > materialised *.

some reported better coverage (like going from 2 to 3 bars or getting signal on places they didn't had previously) but if you're good as is, don't change since your phone can brick if anything goes wrong during manipulations.

most likely, yes

I did not removed anything, it's just that someone confirmed band 2 does not work, probably due to lack of hardware support (see the link provided on the same line)

Haha! I'm glad you found it usefull (and hopefully worth the beers I drank ;) ) Actually both: hardware limitations as lack of antennas for some specific bands and software limitations because of laws in China and some other things of the same ilk. But because chinese 1+1 was made mainly for...

any confirmation that a band is working or not is good to take, even if it's not your question...

well, that's kind of extreme but still feasable, yes. But one need to check LTE12 coverage before doing this... It would be a waste to do it in an area with no LTE12 coverage in the first place (^_^; ) edit: OK, thanks for the report. I'll update the list in addendum.

How to know if band 12 is available: 1) check your operator coverage map to see if there is a place with band 12 only. 2) go there and check if your phone connect on LTE (may not be instant) 3) report any attempt here along with your provider, the place you tried and your result.

Sure, it's on 1+1 website specs page (^_^; ) https://oneplus.net/one#specifications =>

Witch tutorial did you tried? OP or Addendum? If you followed OP's tutorial, your NV values might have not sticked after reboot (check if it is the case using QPST or QXDM) so you need to do this before retrying OP's tutorial:

OPO support natively LTE Bands 1/3/4/7/17/38/40 DOCOMO's LTE bands are 800 (band 19) 1500 (band 21) 1800 (band 3) and 2100 (band 1). So 2100 is supported natively by 1+1 and 1700 (band 9) is a subset of band 3 and should be supported natively too.

I don't believe root is needed but you might need to change recovery for something with backup / install functions like TWRP rmt_storage patch is needed on 1+1 phones only (to prevent NV recovery on next boot) and is very likely different for every phone. Your only hope is to download and...

You did a great job on this tutorial with a load of screens. Have you considered there may be hardware limitation concerning LTE20 ?

Yes. unlocked 1+1 doesn't seems to get any LTE signal in LTE20 only zone so it's very likely a lack of antenna since chip does support band 20.

Weird... 3g related bands are stored in 01877 (rf_bc_config) so putting back original value there could help.

If it's the same as the 1+1, replacing /system/bin/rmt_storage with a version not locked would prevent nv recovery (do you know if NV values were sticking in an older version? If so, take it's rmt_storage and try to replace current one with older one, I think it's worth trying)

Is there a post stating clearly band 2 is not useable? If so I'll update addendum.

Wrote in the introduction part of addendum (or at least, I did put links): http://forum.xda-developers.com/showpost.php?p=55582244&postcount=247 > since somewhere like 33R, NV values did not stick after reboot http://forum.xda-developers.com/showpost.php?p=55919639&postcount=331 > found the...

Witch guide did you used? OP or addendum? Either way, when booting up, it need few minutes to acquire signal (first time after unlock is a little long)

This is probably that they changed the setprop command to bring access the diag modem...

Thanks, updated my post

Hi, you can start SuperSU and change from deny to grant.

I tracked down what permission in OP did make google play service crash every now and then and I just found it: In services tab, you just have to keep ticked ads.jams.NegotiationService

Just in case others also don't know: To restore USB connection, you just have to go to settings > storage > 3 dots menu > USB computer connection and tick MTP back.

Yes, you need to install rmt_storage patch for NV values to stick since update 38R. Wow, you know how to please a geek =] Does this method still need rmt_storage patch and HTC modem drivers ?

Japan band shown on screen are 3G ones, so you can use OP to unlock 3G bands only or Addendum to unlock 3G and 4G bands. OP: http://forum.xda-developers.com/showpost.php?p=55443848&postcount=1 Addendum: http://forum.xda-developers.com/showpost.php?p=56577252&postcount=455 Either way, you'll...

OP and/or addendum tutorials.

Seems to be for LTE19 but can gives some clues for LTE20... new horizons to explore, cc BlackSoulxxx

Well, for me, that was not enough but reenabling also com.google.android.location.reporting.service.ReportingAndroidService seems to do the trick. At least for me...

https://translate.google.fr/translate?sl=ja&tl=en&u=http%3A%2F%2Fandmem.blogspot.it%2F2014%2F12%2Fdfs-cdma-tool.html basically, with this tool, you can, do what qpst+mztool+qxdm can do. nv edit looks like worse than qxdm though...

Actually, it's more probable that oneplus (or qualcomm) pushed lock code on CM git (either CM did not paid attention or maybe they forced it on CM devs) mmhhh... Did you tried to restart your phone and redo OP steps 2-3, 7-8-9 if anything change?

His app shows just the list of present antennas in his area and what bands they emit according to french mobile providers and regulation authority's data. The name's AntenneMobiles. edit: He also said in nett posts that he was using another provider's roaming LTE on 1,8GHz instead of 800MHz.