Search results

When booting TWRP using fastboot, without flashing it to the recovery partition, eg. "fastboot boot twrp-sanders-r20.img", only for the purpose of taking a partition backup, once done the device wont longer take OTA's! That is IMHO a very unexpected behavior, as booting this way and keeping...

Could some one please point me to a full stock image for the with the Oreo rom for the reteu release channel? I have a moto 5gs plus here that does not want to do the OTA update to oreo 8.1 the phone has an unlocked bootloader but unmodifyed system/boot. So I thought i just wil go with...

Hello, I tried to install the Oreo 8.1 OTA update, OPS28.65-36 on my dad's moto, which is currently running NPSS26.116-26-18. The boot loader is unlocked but all partitions are unmodified, when I run TWRP I always do that using "fastboot boot twrp.img" Unfortunately the update fails with an...

After browsing through the new Oreo threads, there were again a lot of users with issues related to new bootlaoder and firmware. So to avoid that I tried installing the new Beta 25 without any firmware files only updating system and boot, and that seam to work just fine. It was the same with...

ups wrong sub forum was meht for OP 3 not 3t

Since I installed the first N OOS build i have issues withmy GPS, every few seconds it lost the lock and needed a few seconds to reacquire it. Also sometimes it does not acquire ay lock at all and need a reboot to work again. As far as I can tell the issue happens with every android N based...

Hi, I recently got a old Thinkpad tablet (TPT), the 64 GB version. And would like to install a custom recovery, i already rooted it. But unfortunately all download links for a fitting CWM image (apparently you need different images for the 16 32 and 64 gb version) I could find were down. So...

In the new OOS beta 8 Nougat thay added a new firmware file lksecapp.mbn its flashed to /dev/block/bootdevice/by-name/lksecapp but when I look there on my current MM OOS the device is not there, so where are they flashing this file to and what is it?

Where is the setting "Allow OEM unlock" being stored? I mean physically in that partition at what offset or in which file the setting value is stored.

A guy over at the oficial oneplus forum (https://forums.oneplus.net/threads/aging-mode.468296/) found out that if you press vol up and down at the same time the phone boots from a different partition, instead of sde18(boot) it starts from sde19(boot_aging) after comparing boot.img with...

never mind just delete it

What CyanogenMod rom are you using?

As its widely known the official installation zips for the 4.0.0 community release of OxygenOS break boot loader compatibility with all other ROMs and all but one TWRP image. I messed a bit around with firmware/kernel/system combinations to bring you the one and only which allows for running...

Since OnePlus decided to change some firmware interfaces introducing incompatibilities, I thought it would be very useful to have zips that update only the firmware to a particular version. This zips do _not_ contain the boot.img or the system partition, only bootloader and other firmware...

When trying to build http://forum.xda-developers.com/optimus-4x-hd/orig-development/dev-aosp-lollipop-5-0-2-t2995695 I get this error: make: *** No rule to make target 'out/target/product/p880/kernel', needed by 'out/target/product/p880/boot.img'. Stop. how do i fix that apparently the build...

I tried to compile a AOSP based rom, but after source build/envsetup.sh like I do with Cm based roms brunch is not available. is brunch CM specific and if so what other command do I need with aosp sources?

To build this rom: http://forum.xda-developers.com/optimus-4x-hd/development/rom-euphoria-os-1-0-beta-unofficial-t2990338 I need a more up to date tool chain than deployed in the EOS repo: prebuilts/gcc/linux-x86/arm/arm-eabi-5.2-ub/bin//arm-eabi-gcc...

I would liek to build this rom: http://forum.xda-developers.com/optimus-4x-hd/development/rom-euphoria-os-1-0-beta-unofficial-t2990338 The first steps look simple enough $ repo init -u git://github.com/Euphoria-OS-Legacy/android_manifest.git -b lollipop-5.1 $ repo sync than add some device...

So,... since I like total Independence and would like to fiddle around with my CM build even when sitting inside my nuclear bunker ruing my Laptop or a old Diesel generator. I set up a fresh BBQ Linux VM while connected to the net and ran: repo init -u...

Given how hard it is to find build instructions around here and once you find some that work and are easy to follow you realize they are buried at least on page 9 or later.. I thought I'll make a thread that guides the user in a simple step by step manner from setting up a VM to finishing the CM...

I looked on the partition layout of the OP3 and noticed that 1. the free space in the system partition is only about 200 MB (with OOS 3.5.1) so at some point there may be not enough space, is it possible to change the partition layout? 2. sde23 (/bt_firmware) is 1 GB large but uses only a few...

I experience a strange thing when installing CM 11 in my p880 the internal storage appears in CM empty (freshly initialized) despite there having been files before installing CM from that storage. Now, when I boot back to ClockWork it shows me the new empty /sdcard but when I install a backup...

I'm wondering is anyone planing to make a Android N based ROM for the OP3? Android Nugat will be released very soon...

There are really a lot of different ROMs out there for the OP3, how are they related to each other? Most likely there are a few builds from the ground up and than myriads of mods and forks of these... So is there some ware a sort of genealogy tree for all the ROMs? I don't think its good...

Hi, Since OP released the source code of the OP3 I thought I would take a shot on compiling them. :D I have a lot of experience with C++ on an application level and also did some minor work with windows drivers. But on Linux I'm still a beginner. Since the repository OP points to...

wrong section prease delete

Hi, I'm using since many years a LG Optimus 4X HD rooted but with the stock Rom, I did not find any custom ROM that would be half way up to date and would run well on it. Now there is kind of a security SNAFU the Stagefright bug (https://en.wikipedia.org/wiki/Stagefright_%28bug%29) that king...

how to make CM 10.1 look more like stock (theme) I really like the bright white look of LG's rom, is there a way to make the CM 10.1 look more like the original ROM ?

I noticed a strange problem after installing CM 10.1 RC1 many files from the internal storage are gone, for example most files from clockworkmod directory, some are there but the most are not, when rebooting to CWM thay are there, also when restoring original ROM they are also there. whats...

When installing CM 10.1 RC1 using rom manager over original ROM. Do I need to clear some partitions manually or does rom manager do all for me?

Is there an official list of bugs contained in the most recent build?

echo /data/local/tmp/odm_reserved > /sys/firmware/fuse/odm_reserved Now that we know that we blow a bunch of fuses not intentionally the question is what other effects except a seemingly working unlock does this cause. will everything else work ok or do we must expect some troubles? Also a...

Hi, I have the 20A on my phone and have unlocked the boot loader today, clockwork recovery is installed and a backup made. Now I would like to try the Cyanogen 10.1. Is there a way to keep my settings, contacts and apps? Or do I have to reinstall everything manually? I know that I must do a...

How to root the new oficial BJ firmware? David X.

Can the boot loader of a LGP880AT-00-V10f-232-10-AUG-17-2012 be unlocked. The device does not have any branding. Also is there a jb update available already for this model?

Hi, I have a ZTE blade that seams not to see itsbattry, it show 0% and always shutsdown automatically, the battery is ok, it works in an other device and an other battery doe snot help. It also wont run on USB power only. Any ideas how I can use it again? May By how to mod cyanogen mod to...

How can I change the resolution the handy is providing on the MHL port? I need SVGA for my HMD, but my phone is currently giving out its native screen resolution. David X.

Are there MHL to VGA adapters available that are know to work with the 4x? Or is MHL standardized enough that i can pick any MHL to VGA without any worrying about working? I know HDMI is usually better but my HMD (tac eye) takes only VGA or SVideo (though SVideo quality really suxx, its only on...

Hello I bought yesterday a 4x HD and would like to update it to the newest available android version. In the about dialog it says "LG-P880-V10f-AUG-17-2012" is this a version with unlock-able boot-loader? The phone was bought in Austria in a normal PC components retails tore and as far as i can...