Search results

LTE Bug? Looks like I've found a bug? Not sure how I should approach this. I'm running a LGD851, using T-Mobile as my carrier. I've noticed that I'm not getting LTE service. I've tried into the settings/Mobile Networks section. I did notice that the preferred network mode is set to...

Wait, Bluetooth as in Bluetooth LE?

Awesome, looking forward to testing it out!

Bluetooth LE doesn't work unfortunately. :( It finds my laptop (non-LE), but not my bluetooth-LE enabled device. Will do a clean flash soon and see if that helps any. I just dirty-flashed the latest version over the previous one to see if it would work.

If I may ask, what changed in this version?

Alright, I'm running your 0.8 ROM for the time being. Tried to do a dirty flash over it just for giggles, but of course that didn't work as well. I did notice one thing on your ROM however - tap2wake seems to work, even if it's in my pocket. On LG's stock ROM, it'd utilize the proximity sensor...

No go - bootloops for me. I'll try reflashing.

Thanks man! Downloading it right now. Will update how it goes.

I'm pretty sure it's the Root Checker - I installed it last night after I re-rooted my phone. I got the very same full-page ad. It was an ad that asked you to test the new 'iPhone 7' and actually vibrated my phone when it displayed that ad. I've only done two things - use the same root method...

No problem - I've been wanting to find a ROM that supports Bluetooth LE (apart from the stock ROM) so if it works here, that'd be really amazing! I have a bluetooth LE device so I can test it out and see if it does work.

I'm willing to test. Any idea if Bluetooth LE is supported in this ROM?

Does Bluetooth LE work in this ROM? I've been looking for a custom ROM that has Bluetooth LE support, but unfortunately, I've had to stick with stock ROMs so far.

In my post, I have already mentioned that the pins are making contact with the sticker.

Pssst. The original link: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWBD8RO0320LAGC9F50CRBM/D85120E_00.kdz

Any update to this? I'm having the same issue - I can see Bluetooth devices, but not devices that use Bluetooth LE.

I've used the charger that came with the LG G3 (1.8 amp) and a 2.4 amp charger. Still doesn't seem to help.

Hello guys, I've been doing some searching around and I can't seem to get wireless charging to work on my LG G3. I recently purchased a NFC/Qi sticker and successfully replaced the old NFC-only sticker on my backplate. I have checked and made sure the NFC/Qi pins and the terminals on the pad...

Does the G3TBox have it for their Lollipop version? I know there was an option to do that in KitKat though.

This is a fantastic ROM. Works flawlessly for me. However, I can't seem to find a good way to turn off the 'Battery Full' notification. It seems like every time I open anything, switch to any new screen, it vibrates and gives me a battery full notification. Also, the UI will actually freeze up...

I just thought it was an odd issue considering nearly all of other ROMs that I've tried have no issues connecting to 802.1x secured networks. Yes, including AOSP ROMs. However, in this rom, WPA and WPA2 connections seem to work just fine. It's just 802.1x.

Yes, I've read the known bugs. I knew that there was problems with bluetooth, Wi-Fi Calling, Wi-Fi Tether, and Wi-Fi Hotspot. I'm not trying to bash you, but did any of my listed problems include any of these four you just told me? I merely stated that I had issues with the looks not matching...

Hey there, I just installed this ROM. It's a nice ROM, and props to you for making this! However, I've been having several problems - I've noticed that your screenshots don't quite match to what it actually looks like in the ROM. Now, I've seen an another user make the same comment and I saw...

Remove the charging cable, remove the battery. Give the power button several long presses, insert the battery, the charging cable, and leave it for an hour or so. Give it time to charge, then you should be able to power it on. If not, then you might want to look at sending it off for repair.

Yeah that's not normal. You could try charging it, but it's likely that the battery is fried already. You can buy a new battery on Amazon or some similar site. Many people (including me) recommend Anker batteries.

It's not bricked. (It shouldn't be) Remove the battery, press the power button several times to dissipate any remaining charge in the phone, and then insert a fully charged battery. I'd recommend you using a different phone (if available) to charge the said battery. After that, it should boot...

This happens when your battery is really dead. You might have to leave the charger plugged in for a few hours before the LED comes back on. However, this is a temporary fix, and it is likely that it will happen again. I'd recommend you to get a new battery, even if plugging it for a few hours...

Nice ROM, has a lot of potential. It's a bit laggy at times and I get soft-reboots fairly frequently. However, I'm not complaining, I know this ROM is in Alpha, so that doesn't matter. Keep it up :D

What carrier are you on? CID? Can you also PM me your UpdateLog.log file found in the AIO folder of this tool? Don't post it here, PM it to me.

that's a fairly old RUU. Use this latest ruu: http://d-h.st/3VD Also make sure to rename it to PH85IMG and follow the usual RUU flashing instructions.

This is strange. I have the exact same Mac address but I'm on the dark glass 0.3 rom. A kernel issue maybe? But the strange thing is that the dark glass 0.3 ROM uses the CM10 kernel, which is completely different to the nightmare kernel that the sense 4 ROMS use. Hmmm

You don't need permission to refer posts :P It's fine.

Run this command. Should fix your internal sd card. Make sure your phone is connected and is in recovery, and make sure adb is accessible. adb shell /sbin/newfs_msdos -F 32 -L INT_SD -c 64 /dev/block/mmcblk0p36 In this, the case IS important. Make sure it's -F, not -f, and -L and not -l, and...

You don't. (A new battery sometimes helps, but not always. I got a new, 1900 mAh Anker battery and it still happens)

Generally, Fail-PU errors mean that the internal chip, the eMMC chips, has failed. Since you mentioned that you have tried many different RUUs and they all failed, I'm leaning towards a failed eMMC chip. Essentially, it means your phone is now borked. However, if your phone has S-OFF, you can...

That is all. If you want to talk about it, go in the respective threads.

Could you redo it, but this time, copy and paste ALL of the output. I'm curious if there's any errors, or if there was anything skipped over. I still don't understand why it didn't move on. The script should have gone through. Maybe try disabling your Anti-Virus, as they can cause problems. You...

Re-download it. It probably got corrupt

This is definitely weird! I kind of wish it produced a log though (like in my script, it would produce a log, UpdateLog.log) so I could take a look.

Script is done! Run this script at your own risk! Keep in mind that I am NOT responsible for any damages that might incur from the usage of this tool. Before running this tool, be sure to download THIS RUU: http://d-h.st/3VD It will NOT work with any other RUU. Rename the RUU you downloaded...

I'm still working on the script. Shouldn't be much longer.

Did you do the command? can you please give us the output, omitting the serial number and the IMEI numbers.

This is fantastic! It means that fastboot DOES exist in your system. This also means we can install a RUU, with a different method. I will compile instructions on how to do this and post back soon.

Can you do a fastboot command for me? Do this command: When running- do: adb reboot-bootloader after you wait a while, probably around 5 minutes, do this command: fastboot getvar all and then copy and paste the output here. Be sure to remove/hash out your IMEI number and your serial number...

I'm talking about Windows. (I'm not too experienced with Ubuntu either :P ) Do you have fastboot drivers on your Windows OS?

Just a question- Do you have fastboot stuff also installed on the computer?

Have you tried forcing it to boot into bootloader with adb commands? Like so: Adb reboot-bootloader Sent from my HTC Ruby using xda app-developers app

Uninstall any download managers and download accelerators you may have and try downloading it again. Also try using a different browser such as Firefox or Google Chrome Sent from my HTC Ruby using xda app-developers app

I think you posted this in the wrong area. Try this thread: http://forum.xda-developers.com/showthread.php?t=1571211 What answer did you hope to gain from this anyway?

Are you okay? You sound sick! advertising *cough* *cough*

How many times do we need to emphasize this? You DO NOT flash this in recovery! And we have said that you have to put this in your EXTERNAL sd card, NOT internal. Sent from my HTC Ruby using xda app-developers app