Search results

I have also been getting this problem intermittently over the last few weeks, and have been choosing Accessibility to unlock and wake with FP. Coincidentally I have been using MS Edge, similar to this person (although using release not Beta)...

It appears to run on S10e without problems.

When I applied these, I masked the mic, speaker, charging ports with some tape before applying the glue and then removed the tape after curing, and cleaning up excess glue with isopropyl alcohol.

I just tried out this curved glass protector, which comes with LOCA and a USB powered UV lamp. https://www.aliexpress.com/item/Akcoo-3D-Curved-Tempered-Glass-For-LG-V30-V40-G7-ThinQ-Screen-Protector-Film-Full-Cover/32952808815.html Shipped to Australia in 10 days. You may want to mask off SIM...

I am using the Omars wireless charger with the rotating pad, it needs a QC compatible charger - I am using the blitzwolf BW-S7 charger with it. Together, the Omars pad charges the V30 to show "fast-charging wirelessly" on the screen.

Hi, I am trying to revert back to 7.1.1 and am running the trebled SIUI 3.1 ROM with an unlocked bootloader on the SS2. I am trying to get to TWRP to reflash the original bootloader files so I can update in OST, however when I tried to flash boot with SS2-boot_twrp.img and then fastboot reboot...

This worked perfectly on Australian V30+ running Oreo firmware V20b-AUS-XX OTA update, it did not need to be flashed to EU or HK firmware.

Is there a way to get to the trebled rom from the stock WW oreo firmware? Bootloader is unlocked. I have tried flashing via OST but I get the 0xc6da error while it is flashing and it is unsuccessful. Fastboot appears to only have limited functionality only. Update - re-read post and found the...

I have just tried to unlock my SS2 running 135 F stock firmware but the cert count was already 0, I edited the image file with 5101 to 60 but still getting cert count of 0. The hex editor shows plenty of zeros above 5000 so guessing there is no key. Is there some way to unlock at this point...

I also suffer from headaches from PWM in displays (as well as other screen factors), and seem to be sensitive to certain phones so am also fussy. From my v30+ testing I have found PWM that I notice, to occur at 41% and lower, so for me this makes the phone usable as I generally set it around...

Understood - thanks for the clarification.

Can it be rooted without this file? Just wondering as I would like the encryption option. Thanks

I also could not run Titanium Backup initially... What worked for me was: 1. Open Termux, 2. type "su" and enter 3. Select once only and Grant permission when the su request popped up 4. Exit Termux 5. Now try running Titanium Backup again, and the su permission popped up. Granted. (running...

I swiped to allow modification

I noticed the same password step. My guess is the first boot is of the TWRP.img, next step is to boot from the device bootloader, press cancel, then reboot - bootloader to get into that. You will need to cancel again as it prompts for encryption password again. I then followed the steps.

Has anyone tried this on an Australian 930DS model?

Has anyone worked out if the Aquos S2 screen has PWM, and what frequency it has?

1. A rear facing Intel realsense camera module that acts as a 3d scanner for augmented reality apps 2. A thermal imager module. both modules could also using existing cameras to combine data.

VoLTE icon showing on the top of my screen, calls working well providing very clear audio (when on network) Telstra network (Australia)

I have a single SIM H815 TWN model. I havent done any benchmarking but it seems to have around the capacity of the original 2900 mAh

I grabbed one of those TQTHL "5000 mAh" batteries. Its weight is 1g heavier than stock, so far looks like a poor performer. Went from 100 percent to 83% overnight with nothing else on. Usually only lose a few percent on stock, I will try a few more charging cycles..

I found using a plastic ruler as a wedge to be handy for this, as shown in the images I posted above. Just be aware there are two strips of double sided tape as shown in my pictures above. By pushing the ruler in between the battery and the aluminium sheet it broke the hold of the double sided...

Sure we can fix the leaks - in the meantime I got a bigger water tank.... I weighed the original battery at 132g - the new LG 1200mAh is 207g

I have also upgraded my battery. Orderred a 1200mAh LG set from AliExpress, and installed it a couple of days ago. Battery life is definitely improved - with heavy use of chrome, twitter and some apps, it has run 5h 6m on the battery with 20% remaining. Battery screen showing 91%, others 3% and...

I tried overclock to 1.152 and result was stable, score of 19734 :)

I can confirm the following on firmware 3.2.1 V1 (rooted) Antutu v3.4 Score 18846 RAM 2574 CPU integer 6035 CPU Float 4017 2D graphics 2127 3D graphics 3320 Database 420 SC write 150 Sd read 203 CPU freq 1008 MHz

Thanks for the ROM. I flashed over 2.55 rooted, wiped cache, wiped dalvik, flashed rom then flashed supersu. One problem - I cannot run the camera - "Unfortunately, the camera has stopped" Can anyone suggest a fix for this? (other camera apps are working, but like the Xperia camera) Thanks

Hi there, thanks for the ROM. some feedback: I have noticed that when using the phone the screen does not come back on when you take the phone away from your ear. It seems to occur after more than a few minutes only - if I call, put to my ear for a few seconds and then away, the screen...

I have experienced the rebooting also - about 3 or 4 times per day since I have flashed the fr ICS, and just this morning it shut itself down at around 3AM. Apart from that all phone functions appear to be fine. My model is OT-995A (WCDMA 850/1900/2100MHz) Is yours the same model? What apps did...

Hi there, the model I purchased called OT-995A says supports HSPA/WCDMA 850/1900/2100 MHz but I believe the OT-995 and OT-995S support 900/2100MHz - but I have only seen OT-995A in Australia. I was wondering if to enable 900MHz support it could be done by a firmware flash from the other model -...

I have a couple of OT-995 on the Australian Telstra NextG (850MHz) network and want to be able to use them on another (900/2100) network. Has anyone an idea if I can flash between the OT-995A (3G 850MHz and 2100 MHz) and the OT-995S (3G 900MHz and 2100MHz)? Thanks

Thanks - yes I think the store has the same policy (although its not the law here), the turn around time of 3 weeks makes me think twice before doing it again....or just wait for ICS which may (or probably will not) fix the issue. I can almost live with it, and just rip the battery out when it...

Hi there, I finally received my OT-995A from repairs (experienced high battery drain (~10 hrs, GPS not work until reboot, and Black Screen of Death). They just reflashed the firmware (same version as before, Australian 995A) and said it passed all their tests. I rooted it once I got it back, and...

LOL I think so, the guy at the shop now saying they should be there in 'another week or so', so back in the trusty old HTC desire. I'm hoping the unrooting process made everything back to normal. Sent from my HTC Desire using xda app-developers app

I dont think so - you can boot the CWM from adb on your PC, then back it up on the phone. btw, I have sent my handset back for repairs after a few self-reboots and a "black screen of death" experience. It has been 2 weeks now, still waiting for repair/replacement.

I had recently installed Time Recorder (time sheet app), Tasker and Quick Boot. I will uninstall them and see if the problem continues.

I encountered a strange problem today - the phone could not be woken up by pressing the power button, long press of power button also produced no change to screen and no vibration. I removed the battery and powered up normally. Has anyone else noticed this behavior on the OT 995?

thanks iuss, my box says 850/1900/2100 So maybe there are two versions 900/2100 and 850/1900/2100 Would they just be different firmwares on the same radio? on my device Quick System Info PRO (from play store) : Show Properties->Device->Radio M8255A-ABBQMAZM-4.1.40T

There seems to be some misunderstanding on the 3G compatibility of the OT 995 - on another forum some are reporting functionality in 3G 850MHz with the box showing WCDMA e.g. 850/1900/2100MHz and the Alcatel website shows that it is 900/2100 MHz compatible...

Has anyone got an idea on whether the RAM can be boosted for the system by reducing the allcoation to the GPU by reconfiguring the kernel setup and recompiling a new one. I am wondering whether (a) This would be useful, and if it would be useful, (b) how difficult it is to change - is this a...

Has anyone determined if this is a button and what function it performs? https://imgur.com/oHHvt It seems to have some access through the plastic cover?

Thanks for this iuss, much appreciated. The VPN works perfectly. If others need this, these are the steps taken: 1. Busybox Installer (stericsson) from market 2. OpenVPN Installer from market. 3. OpenVPN Settings from market. 4. Extract iuss tun.ko and put into /system/lib/modules (this was...

There is a new version of the source posted on sourceforge.net / projects/alcatel/files "OT_995_20120612.tar.xz" 81.8MB

I am trying to get openVPN working with the current firmware but need tun.ko for this kernel - did your build have this module, and could it be dropped in to the current firmware? Not to worry - Pure noob - I didnt realise this was for the CWM. (sorry)

I dont think ROM Manager supports the Alcatel OT 995

Have you checked that adb is working correctly?

I have noticed the light bleeding issue as well. Its fairly mild, but you see a faint wedge of light running up the screen from the hdmi port location up the screen, but only noticable on a fully black screen

Thanks for the image. here's the steps I took to use it : ********************************************************* please be careful and follow these steps at your own risk, be warned, you can brick your phone and I have no idea how you will be able to fix it if it is broken...

I cannot see any OTA update available. When I go to Firmware Upgrade Manager, (Settings->About Phone->System Updates and press check for updates, it shows current firmware version 2.3.6, checking for updates. It then says "No update information is available now. Please check it later."

I woke up this morning with the battery completely flat (forgot to plug it in). Anyhow, after getting the phone back up and running I couldnt get the launcher to show. android.phone force close and android.core force close constantly. I rebooted it many times, but there seemed no way to bring up...