Search results

Just here to say thanks for this mod. Ended up using it till I get around to making a system less mod for turning on 5ghz wifi this device (build.prop mod. :) nice work. Edited the prod live on the system, and obviously that tripped the check, this worked around it. Sent from my BTV-W09 using...

I'm just following up, I didn't forget. I got slammed at work and preparing for a work trip but I have the devices in my possession that work. I'm going to post in a few hours when I get some errands done and can tane some time to pull together names/specs/Amazon links etc. I'm sorry! Sent...

Ive tried several at work that all work well, including several that don't work. Ones that work all have power pass through, so look for the docks etc. When I get to work tomorrow I can make a list of what I've gotten working. Sent from my Phone using Tapatalk

Just adding my voice to this. Works great. I didn't have to add any mods or hacks to get this working like some of the other camera mods took. Very pleased. Sent from my Phone using Tapatalk

Good call. I guess I've always put the platform tools in the system paths variables because I use adb and fastboot so often. Sent from my Phone using Tapatalk

IMO the variable being set there is stupid. It's just what was there from the Razer full firmware off the dev site. Generally speaking you'd set a variable you will use more than once that would save you some typing. After setting the variable fastboot_cmd it will replace it in buffer with just...

below is the script I used to update from the original 8.1 to the May update. set fastboot_cmd=fastboot %fastboot_cmd% flash partition:0 gpt_both0.bin %fastboot_cmd% flash partition:1 gpt_both1.bin %fastboot_cmd% flash partition:2 gpt_both2.bin %fastboot_cmd% flash partition:3 gpt_both3.bin...

My steps supersede the full instructions in the original post. Since 8.1 you don'r need to fastboot flash twrp, instead fstboot boot twrp. from there use sideload booted twrp to flash twrp (which patches twrp to stock boot image) then reboot back to twrp that is now been patched into boot...

I've run into several issues and I think that it comes down to a missmatch between the 2 different boot slots, specifically the B slot. I noticed in flash_all script when writing the system partitions it writes a different .img file for the B slot. %fastboot_cmd% flash system_a system.img...

It may be a physical defect then. Take it back to the store and exchange for a new one. Sent from my Phone using Tapatalk

If you relook and still have a modified boot partition, anything that doesn't match the key signature stored in the EFI won't be able to load. Basically if it's not stock it won't load, ie won't boot and it'll give you a message about unable to boot instead. :)

Is it even not able to connect after a reboot? If it's still acting that way after a reboot it could be something stuck in the data partition keeping it active (like something stuck in cache in the photos app or another app that can use the camera). So one thing that you can try is clearing the...

If you haven't and are able to make a backup. go to download mode and run: fastboot flashing unlock_critical It will have you select yes or no It will wipe userdata just like it did when you did the regular fastboot flashing unlock you can then from there flash_all from download mode again...

Just a curiosity, when you unlocked bootloader did you also unlock_critical? If not, whatever version of any of the partitions that you got from your last OTA will be there and if you do the downloaded latest firmware and run the flash_all script, some of the items will fail (it's easy to miss)...

I'm late to the party. I only just purchased the phone. My phone came with the the 813 firmware on it so I unlocked bootloader & critical unlocked then Flash-all'd the newest global 3005 firmware. I did phone setup oobe etc then copied the boot.img from the downloaded firmware to the SD card...

Not at all. There are a few things that would seem to trigger it more than others. Let me see if I can poke it into doing it. ---------- Post added at 05:50 PM ---------- Previous post was at 05:45 PM ---------- After checking, one of the ways, at least for me to get the flashing wallpaper...

I've using the 17.4 test build. :D I've been of of the few that seems perpetually plagued with the bluetooth problems, and with much relief the bluetooth has been amazing. So far the Bluetooth has been awesome. I'm using a 910T My bluetooth devices are a LG G Watch R and a Plantronics...

Hi all. Long time listener, first time caller on this thread.I love the work. Great job Zion. I'm not on the latest build yet, considering doing it tonight. I'm running through 14.4 dirty from a 14.3 clean as was suggested at the time. I too have the Bluetooth problems, and I'm throwing this...

Downloads down? Tried pulling this down from a a couple different locations. "Connection Refused" These gone?

I may not have just noticed it prior. But yours appears to be the same that mine is doing. Sent from my SHIELD Tablet using Tapatalk

I get it some times, I've had it happen when there are a lot of apps going, and if an app hits high cpu load it seems. It'll do it for a moment, and clear up for a while. Closing down the backgrounded apps seems to help me. YMMV Edit: You running latest update? I noticed it start after the...

You don't need a new sim to travel with. I've used my sim and carrier many times in UK and Germany with out issue, you just get to pay a premium for roaming. If I wanted to use a local carrier and then the local rates, then I need to be unlocked and then a local carriers sim.

Much to my dismay, I think device is dead, bit I was more wondering if anybody else has run into this at all. To preface I'm currently traveling in Europe, phone worked fine from the 17th of October. I have the International Data and every thing was peachy till last night when it stopped...

I haven't for the life of me been able to get 8-10 or 8-6 to boot. Currently I'm running on the 7-14 Official built and it's working fine. No amount of clean or dirty flashing has helped me. I've gotten as far as a few moments into the liquid animation, it starts stuttering a few frames then...

I'm on the May 6 build and I have periodic "System UI" force closes when installing apps from market. It's manageable, but still slightly annoying. And that was from a clean flash. Redid the flash twice in fact cleanly. Sent from my SGH-T999 using Tapatalk

Is there anybody using the June 2 build? Sent from my SGH-T999 using Tapatalk

I've been using my camera heavily, not a single force close. I did have that unable to connect message, before, but that was on stock rom then. Ymmv. You restore anything using titanium? I've had tons of problems when using titanium. Seems to be hit an miss with titanium, and I never restore...

Anybody flashed any kernels yet? What ones work, what ones don't? I read over on ktoons kernel thread, its not working on PAC. Sent from my SGH-T999 using Tapatalk

I update right now every couple weeks, or if I run into a problem I can't stand.

I read over on ParanoidAndroid that they just started to port their mods recently, they are using AOSP as their base, so that's a thing also. It will be amazing once it falls together. Sent from my SGH-T999 using Tapatalk

Thanks for the info Papa. As soon as I get my new motherboard (previous one literally caught fire) I plan on joining DIBS. There was also the tip that 4.4 is coming soon! Excited! Sent from my SGH-T999 using Tapatalk

You can have the adblock apps use this hosts file by the way. But no real point. The hosts file is a better solution hands down IMO. Sent from my Nexus 7 using Tapatalk 4

This is the HOSTS file. Whenever your computer makes a connection it checks the hosts file first to see if it's a known address. Since Android is Linux based it very much has this functionality already but unless you are rooted you don't have access to this file to addresses to hosts file. That...

With the shorter and shorter designed life span of devices, I'm not surprised. But I have no desire to get a new phone right now. There are very cool phones out, but I still love the S3. Sent from my SGH-T999 using Tapatalk

I'd rather see some of the awesome features keep rolling out then be working on new source. :thumbup: Stay the course, fight the good fight. :beer: Sent from my Nexus 7 using Tapatalk 4

I just updated from Oct30 to Nov4(dirty) , this seems much more solid. I've only had "random" reboot but I was mucking with kernel settings, so I think it related to that. Only bug I'm having is that I can turn on bluetooth from the settings toggle, but it won't toggle off. I've worked around...

You can also get it from the Amazon android marketplace. http://www.amazon.com/gp/mas/get/android The don't seem to carry all the same restrictions that Google puts on everything. Just another option. Sent from my SGH-T999 using Tapatalk 4

TWRP will throw errors if it wasn't a clean download, in other words corrupted in any way in transmit. One easy was I don't to check, with Root Explorer you can view zip files. If it allows you to open it then it's at least downloaded completely. :) Sent from my Nexus 7 using Tapatalk 4

I'm seeing this same thing. I would even venture to say that even on stock UI it was even tucked under the notification bar a few pixels.

I'll try going bock to KT747 tonight and see if the problem comes back. I had done a clean flash of 23rd nightly with KT and had the volume problem, then dirty flashed the 24th without kernel and it was working perfectly since. Not entirely sure what was the cause. Sent from my SGH-T999 using...

I was having the same issue, but I'm not sold it was the ROM. What kernel you using? I had kt747 kernel up to the 23rd nightly, reflashed without the kernel and I'm fine now. I'm running the 24th build without issue as well, without kt747. Let me know if that fixes ya. Sent from my SGH-T999...

I have a question, been using this kernel for about 2 weeks, progressing through the changes. PACman rom. Not having a real problem with anything really other then when streaming audio through Play. I expect it's more a tweak rather than an issue with the kernel because I had the same issue...

Flashed 6/19 last night and my volume is stuck full blast. It was a dirty flash, well the meter will change but the actual volume does not. No other problems though... :rolleyes: never had this happen before. Quite the surprise when I put on my studio headphones into my phone which run kind of...

Another thing to try is any app from the play store that downloads the a-gps hints. Gps Status can do this, and Gps Test also. I've confirmed both today. Also the app I mentioned before, Pimp my rom. Sent from my SGH-T999 using Tapatalk 2

For the gps lock, at least a workaround is install pimp my rom from the play store. It has a gps configuration it pulls down according to what general location you select. I get instant lock with it. It's part of my standard apps I put on when I flash a rom. I highly recommend. Sent from my...

I'm feeling the same way. A giant empty place inside. :o But keep up the good work guys! I know it'll come together. Sent from my SGH-T999 using Tapatalk 2

Re: [ROM][OFFICIAL][4.2.2] PAC-Man ROM v22.0.1 [AOSPA + AOKP + CM10.1] (3/29/13) That's the big difference with not doing the factory, aka bloated roms. Most strict clean android roms from source end up around 150mb. Touchwiz seems particularly huge, so the trimmed roms end up 600mb instead of...

Re: [ROM][OFFICIAL][4.2.2] PAC-Man ROM v22.0.0 [AOSPA + AOKP + CM10.1] (3/21/13) I do. I've also had noticeable screen transition hesitation when it does the sound pop/delay. Haven't tried it on videos, but it doesn't seem to affect streaming music on Spotify for instance... Sent from my...

Has this mod been pulled? Sent from my SGH-T999 using Tapatalk 2

Easiest way is to install goo manager and let it do it for you. Sent from my SGH-T999 using Tapatalk 2