Search results

Thanks for the update mauronifrio.

Very nice. Thanks for your input.

Thanks for your reply. Since I have already pulled the boot image with the payload dump process I will try that route first, and if that doesn't work I will try your method. Again thanks for the reply. All in all, I guess just booting the image is no harm , no foul.

I'm a little confused also about rooting the 8t. Couple of threads refer to using payload dumper. Others refer to using the broken twrp method. One produces one boot image while the other produces two. I went with the payload dump method and got the boot image. Just not ready to pull the trigger...

Thanks for your input. I appreciate it.

Did you have to patch the boot .img from the new 11.0.6.8 OS, and I noticed on the upgrade flash you did the "install to inactive slot after OTA" according to your post.

I downloaded python, payload dumper and the full latest OTA for my 8t. Followed the OP's guide and voila, got the boot image. Have never did this before and needed to learn it. My question is, if I boot the patched image, does it automatically boot into the system or do I manually reboot to the...

Flashed the 3.4.0.11 twrp, rebooted to recovery to make sure it was good to go then flashed magisk. Things seem to be working good. Rebooted to system and everything booted up fine. Thanks for the update and your work on twrp recovery.

Thank you for all the input. I will tinker around a bit some more and see if I can get it working.

Yes. I've tried legacy mode and compatibility mode. Nothing. Sorta stumped.

I've tried the newest version and 2.7.1.6. Neither have worked. Have also flashed the AML along with it.

I have done that and still doesn't work. Thanks for your input. I appreciate it.

I have used viper4android for some time now on my oneplus 6t. Took the latest OS update and now viper will not work at all. Downloaded and installed module thru magisk. I have tried toggling legacy on and off as well as compatibility toggle. Nothing. Don't know what I'm doing wrong as before...

Was a little put off at first, but I now find myself enjoying the new format. Like the looks and feels of it. Nice work.

I take it you just flashed the magisk module? I've tried several methods, the module being the first and still a no go. I used to just flash the module and it worked.

After the 10.3.7 update, viper4android has stopped working. Anyone else with the same problem?

Looks like there is the full OTA on one plus website for the 8t 2005 NA model.

Installed the 10.3.6 OS along with the newest mauronofrio twrp and the newest magisk. Flashed everything thru magisk except for the OS. Flashed the OS thru local upgrade. Everything seems to be working well.

Thank you mauronofrio for the update.

Thanks for the update mauronofrio. So far it seems good.

You can flash twrp in magisk by going to modules in magisk. Then tap on the plus sign in the yellow circle and find your twrp installer then tap on it and magisk will flash it. ---------- Post added at 04:57 AM ---------- Previous post was at 04:56 AM ---------- Thanks for your reply.

What I meant the "rest" was flashing twrp with magisk and then flashing magisk to inactive slot after OTA. Sorry, should have been a bit more thorough. ---------- Post added at 06:26 PM ---------- Previous post was at 06:20 PM ---------- I have never used the beta oos but from what I have...

Updated to 10.3.3 along with latest magisk and latest twrp. So far everything seems to be working fine. Will update if I find any problems. Safeynet is good. Updated with local update and the rest thru magisk.

I used to use the twrp method for every update but a few updates ago, I started using the magisk method and I can say I prefer it over the twrp method. Have a good one and stay safe!

First I would disable your magisk modules and then magisk will ask to reboot for changes to take effect. No need to uninstall magisk. I never have. Then... 1- reboot to twrp and flash new oos 2- flash the latest twrp installer 3- reboot twrp ( to make sure it sticks ) 4- flash newest magisk 5-...

I am on 10.3.2 and have no issues with proximity sensor. Works as it should.

Updated to 10.3.2 along with twrp 3.3.1-32 and magisk 20.3. so far everything is good. Came from 10.3.1.

Upgraded to 10.3.2 along with twrp 3.3.1-32 and magisk 20.3. So far everything is working good.

Thanks for the update. Installed and performing well.

Very nice. Subscribed. Thank you.

You are very welcome and I'm glad it worked for you. Awesome.

Yes. That should work. Don't need to wipe cache but it won't hurt anything either.

You do not need the oldkeymaster.zip anymore. I believe it was for decrypting twrp in earlier version of twrp when Android 10 came out. It has since been fixed by the dev.

Thank you for the follow up. Appreciate it.

Thanks for the input. I know years ago with my Nexus phones and custom ROMs it was mandatory to disable the security before making a nan bu. The only reason I still do it is to be safe. Only takes a couple of minutes to do and I know then I will not have any problems. I got bit a couple times by...

From what I have read and past experience, it is always recommended to disable security before making a nandroid backup

Downloaded full update zip and placed on root of storage. Did local update in settings>did not reboot. Opened magisk and flashed the 3.3.1-31 twrp zip>did not reboot. Went back in magisk and pressed install next to "Magisk is up to date." Pressed install> to inactive slot after ota. Rebooted...

Updated smoothly to 10.3.1 along with twrp 3.3.1-31 and magisk 20.3. No issues so far.

I have had no issues with anything since I upgraded to 10.3 along with the latest twrp and magisk. Everything is good along with great battery life. I do not have a heavily modded phone also. Viper is also working great. I also dirty flashed.

Boot into twrp. Flash the latest twrp installer from mauronofrio, 3.3.1-30. Reboot back to twrp to make sure it sticks. Flash magisk 20.1 then reboot to system. Should be good to go. I always disable magisk modules when flashing magisk also. Some don't, some do. I try to play it safe. Hope this...

Upgraded to 10.3 and everything so far is fine. OS is snappy and Wi-Fi hooks up quick, both 5g and 2.4g, as well as Bluetooth. Fingerprint sensor is snappy as well. Viper also working good. Am rooted with magisk 20.1 along with latest Twrp 3.3.1-30. Battery life has also been good.

Decided to give myself a little Christmas present, so I finally installed the Android 10.3.0. Sort of odd when I decided to do this and had proper files on the root of my phone, a system update from one plus popped up, so I guess it was meant to be. I followed the procedure as described earlier...

Thanks for your direction. Appreciate it.

While in root explorer and showing the root of the phone, I mounted r/w by touching the mount r/w, r/o button. I'm still on pie so can't confirm if this will work with Q. Was able to free 34 mb of space.

i tried with root explorer. did not work until I mounted R/W

Am on 9.0.17 and am wanting to upgrade the OS to 10.3.0. I have pie twrp already installed. If I flash the new 10.3 OS and then the twrp installer zip, does the installer recognize the OS version I'm on or do I need to fastboot boot the twrp Q image, then flash the new OS, then the twrp...

Did you mount R/W?

Thanks mauronofrio for the update.

yes.