Search results

My M180 adapters with a maroon dive strap... swag!

I'm not getting ANY vibration for notifications after the update, really hoping they fix this soon as it's the whole point of a smart watch. Have tried restarting and resetting to no avail.

I've had success getting my music onto my moto360, and pairing a set of BT headphones, but I'm not getting any sound at all out of the 360. I get a beep when the phones pair up, and nothing while playing music. Thoughts? I've paired the phones with my computer and they do work fine. ----------...

Check it out, I signed up as a backer for this; https://www.kickstarter.com/projects/1183644800/steelconnect-m-adapters-for-moto360-smartwatch?ref=nav_search

Nice, i'll be buying one then.

I'm not pursuing development of a watch band adapter anymore; I've tried a bunch of combinations of designs and the watch just wasn't made for it. That being said, someone go ahead and prove me wrong...

Okay here's hoping this works; Waiting on the print.

So...... that didnt' work. No way to mount the watch into the chassis as it were as the tabs get in their own way. Back to the drawing board. Going to take one more kick at it and see if this is doable via an alternate idea i have in mind.

Slimmed down concept, waiting on this to print;

hmmmm, the adapter keeps wanting to flex downward and hit the bottom plastic... here is a new concept i'm fiddling with; combine bump protector and strap adapter?

Okay this is too large, you would need a massive wrist to pull this off, back to the drawing board. Adapter "in the rough" from the printer. And mounted to the watch after a bit of cleanup work

I think this is looking damn sexy Larger design swoops around the sides, while sloping down from the top of the bezel, and follows the curve of the wrist so that it's not sitting flat on the wrist, thereby minimizing stress on the plastic backing of the watch. Printing now.

V3 actually is going to be a bit chunkier, and yes slope downward from the bezel. I was going for a "minimalist" style but I think a bit of "junk in the trunk" on this design would work. A lot of sloping curves to match the aesthetics of the watch.

trying to keep it away from the back plate yes.

Version 2: Still a bit thick, had to sand the tab down a bit. But overall much better fit than v1.

Success! A few kinks I need to work on the mesh for a bit, but hopefully will have a final copy done by tomorrow. *Note: This does sit flush with the bezel, I just don't have a spare set of spring arms to get it to stay put.

Working on a adapter for standard watchbands, this should also allow the use of dive bands if the layer of nylon webbing between the charger and watch isnt an issue..... Printing a test model now, will get it done out of stainless @ shapeways if it works..

Just got mine up here north of the Maple Curtain, and so far my second day with it has been going quite well. No complaints, it's doing what it should and after taking the watch off the charger at 0700hrs today it's still at 52% (currently 1623hrs).. so that should equal roughly 18hours of...

http://en.wikipedia.org/wiki/Optical_illusion

I have ordered one, will update when it arrives.

Totally, no worries if you drop it there is a good 2mm lip. See the aluminum bumper case thread for a link. THIS MACHINE KILLS FACISTS

Aluminum bumper case w/ "mass effect" themed vinyl;

Here is a screenshot of my signal strength with and without an aluminum bumper case which just arrived today; The case I purchased is this one; http://www.ebay.com/itm/110989579068?var=410151361315&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Sweet bumper but wayyy too pricey considering the chinese are banging the same thing out for $10 a unit. Still please post pics when yours comes in. Sent from my SGH-I317M using xda app-developers app

I had issues installing, AROMA installer kept freezing up when I made a choice, and once I did get it working after about the 6th run through the phone wouldn't boot up (no load screen). Would anyone have thoughts on this?

That is actually just a small green triangle decal to help align the tablet to the dock.. sorry the disappoint! Sent from my SGH-I317M using xda app-developers app

Yeah sure, give me a few days and I can whip up a schematic. Sent from my SGH-I317M using xda app-developers app

zeam launcher Sent from my SGH-I317M using xda app-developers app

Where did you get the orange carbon fibre battery cover?

I just ordered one on eBay from a seller who was located in Hong Kong; it came via EMS and Canada Post and I didn't pay anything duty wise. What you are describing are not duties, they are "importation/brokerage fees" and likely you are having your items sent up here via UPS or Fedex who charge...

No, I used a liquid cement that is made for use with plasticard, it's the kind you brush on and dries within about 15 seconds. The hot glue was used to secure the charging cable connector and the steel nuts i used to add weight to the dock.

Finished dock;

I've owned my TF700 for about two months now, and as I am coming from the Mortorola Xoom the one accessory I've really been missing is the standard charging dock. Not a fan of having to fumble around with the cable and connector every time I want to charge my tablet. So being on Christmas...

I'm hoping that maybe some case manufacturers troll these boards; why have we not seen any snap on hard cases or silicon cases for the asus tf700? A la; I am aware of two silicone cases, but they are very bulky and absolutely horrid from an industrial design standpoint (ie: fugly). What's...

I can't wrap my head around why there does not appear to be ANY manufacturers producing minimalist slim wrap style cases in TPU material etc for this tablet. Coming from the Xoom which had a good number of "slip on" cases, or the Samsung Tab 10.1 which has a ton of them, finding the lack of 3rd...

Just got mine (wanted grey, they sent black, dealing with the seller for a refund or a new one).. w/ white carbon fiber vinyl wrap on back cover. Only 1dB drop in signal strength with cover on.

Just got my SGP NEO Hybrid case today; fit great and looks classy; Mad about Mass Effect at the moment, so threw on some vinyl and a matching wallpaper.

Just upgraded my xoom to HC 3.2 and the "keyboard lag" is all gone!

Wow, great guide took my HC 3.01 CDN Xoom to US 3.2 no problems, mods please sticky!

I didn't sign the petition because the text read like some fifth graders take on what a communist manifest of grievances against Moto should be. If it had been written well and in a manner that would not lead one to believe that the author was off his rocker, then I would have signed it.

how is any of this trolling? This thread is simply frustrated owners venting a bit; unless people start hurling slander against one another what is the harm? As a Xoom (wifi) owner, I would be upset if I had bought a verizon model and promised 4G that turned out to be more Moto smoke and mirrors...

if you bought it in the US, its a US model... if you bought it outside the states, prolly international. No release for int'l xooms yetm I am in the same boat as you with a CDN xoom, waiting for 3.1 hat in hand.

Just taking the opportunity to also jump on you and say ''No! Bad post!"". Inform yourself before spreading falsehoods please.

7 replies and not one person mentions that the nook's screen is only 16 bit... of course there will be gradients, its a small issue and when I noticed it with a space themed background went ''meh'', and used a different one.

i am curious why one would jack their screen brightness up to 85% in the first place, 33% gets a perfectly view able screen indoors. Not to mention the savings wrt battery life.

Useless on a tablet, does not scale to the right resolution. Tested on xoom w/ HC 3.0.

I can only speak for the xoom, no problems playing xvid or even 720p .mkv's or .mp4's. I have been using rock player instead of the stock player fyi.

I find that the only people who complain about the power button being on the rear of the xoom, have not actually owned one. It's not a big deal, once you know where it is, it's easy to hit it, stop ripping on one little button if you cannot find any actual design flaws to gripe about.

can't install, I get a parsing error on my xoom 3.0 cdn.

ZAGG sells a similar kit that includes a solution in a spray bottle. As well, you can also order the kit with a graphic pattern on it either from the shop or your own custom work, thereby giving you protection with a good grippy surface AND cool graphics to customize your tablet. Ill post a...