Search results

Same here on my S10, have just reported it via the Samsung members app. Obviously, Chrome not functioning in DeX is a major issue and they need to get it fixed pronto. I suggest anyone else having the same issue also reports it to Samsung via the Samsung members app.

If I remember rightly, once you see the green android and red exclamation mark it's just a matter of persistently trying combinations of volume up, down and power to access recovery. I don't think I ever identified which was the right combination, just takes a little persistence.

Bluetooth mouse worked a treat by the way.

Ah, I have one of those so I'll give it a try. Device is Galaxy S6 running completely stock marshmallow. In one of the modes the game pad seems to make the left thumb stick act as a mouse but maybe there's a little glitch.

I believe that this unit is more commonly known under the Shinecon brand but I could be wrong. I have one too and find the lack of button to be a right royal PITA. I've tried to use it with my ipega game pad but the mapping doesn't seem right and it doesn't behave as expected, do you have a good...

I seemed to remember reading that either Shield Services or Tegra Services was running amok and contributing to the lag in lollipop. I currently have these two services set to use only two cores at 50% Max and the tablet seems much snappier.

I haven't found a ROM yet and I've been looking for ages. Lollipop performance on this device is somewhat erratic; sometimes it's brilliant and others it's useless. Never had to reboot a device so often in my life.

Wifey has one and it's complete garbage. You have to start music and running app in a particular order, it takes forever to get a GPS fix and it invariably either loses GPS or freezes/crashes mid run. Sony don't even seem to have bothered to make a GPS tracking app, so users had to wait for the...

Chrome became useless for me after 4-5 days. Usual method to install AOSP browser doesn't seem to work in lollipop either so giving Opera a try. Chrome was just too slow to use.

I'm quite impressed, first time I've tried Touchwiz in months. Seems quite polished, almost embraces material design. It would be nice to get the onscreen buttons with faster access to Google Now and the app switcher; Samsung's idea of a long press is a loooooooooooooooooooooooooong press.

It's the first ROM to tempt me back to touchwiz in a long time. Everything seems spot on except Knox isn't working. Clicking on it causes it to try and create a Knox session then the app closes with a pop-up saying "Failed to create Knox mode. Please try again". I guess I could always install...

Good question. At some point I will need to replace my trusty Motoactv and at the moment the only thing to fit the bill is the Sony Smartwatch 3. The 360 looks so much nicer.

I haven't researched it fully myself but i hear the the Droid Razr XT910 shares a lot of hardware with the Xoom2/XYBoard. If someone was to attempt a port i imagine that would be the place to start.

Has anyone got anywhere adapting an XT910 ROM for Xoom 2?

Actually Verizon devices went as far as Jellybean and those ROMs can be flashed on any Xoom2 using the guides on xda. Having done it though i wouldn't really recommend it. Without regular use of a speed booster (which shouldn't be necessary on android) it becomes very slow and laggy very quickly.

Has anyone tried this on a non moto phone running CM11?

So I updated my MZ607 to JB using the guide here: http://forum.xda-developers.com/showthread.php?t=2591388 To be honest JB runs horribly on it; it's slow, laggy, unresponsive to touch input and I wish I hadn't bothered. In short I wish I could go back to ICS, which sort of worked. Some people...

So, did anyone manage to get anywhere with this?

I just brought mine back to life with the instructions here: http://forum.xda-developers.com/showthread.php?t=1485741&page=78 I used adb and fast boot from Google's SDK but it took some messing about to get adb to see the Xoom.

I'm not sure why but Chrome says the windows drivers file is malicious, anyone else get that?

Does anyone have the files to unbrick an MZ607 that's been previously upgraded as a Verizon MZ609 to 4.1.2 but then accidentally downgraded to 4.0.4 (and failed)?

I had similar issues. Using the included 1A charger it would stop at 90% but a 1.5A charger would get it to fully charged, I'd just assumed the tablet battery was getting old. Mine also refused to stay switched off when charging which I suspect is linked to the CID error at boot, don't think...

Also tried this and it fails when flashing the boot partition. I just ordered a factory cable to see if it can bring it back to life...

If there's a version of yours sold in America by Verizon wireless you may be able to put jellybean on it but my advice would be to not bother, it becomes laggy and horrible after a few weeks use so you just end up clearing data and going from scratch rather to often. KitKat with its low memory...

I just picked one up from Curry`s for £100 to replace my Xoom 2 ME. The Moto HDMI lead, bluetooth mouse and bluetooth keyboard all work brilliantly on it, in fact the keyboard works better on the Note than the Xoom! Now just hunting for a decent game controller that doesn`t cost the earth...

Bit of a shameless bump but... Nvidia say many controllers will work but only give instructions for the Logitech F710 (wireless through a dongle but expensive) and the Xbox 360 PC USB controller (wired). I`m wondering if the PS3/PS4 controllers or any other decent and reasonably priced ones can...

Like the genius I am I've bricked mine too. I'd followed this guide but then I managed to delete the stock browser whilst trying to install a CyanogenMOD browser (long story) so figured I'd just repeat the steps that I used to flash the US MZ609 firmware. What I'd forgotten is that the first...

Like the genius I am I've bricked mine too. It's a UK MZ607 that's been updated to JB from the US MZ609. I managed to delete the stock browser whilst trying to install a CyanogenMOD browser (long story) so figured I'd just repeat the steps that I used to flash the US MZ609 firmware. What I'd...

I just stumbled upon this thread looking for a way to install the webtop 2 system on a Xoom 2 ME (that thinks its a XYBoard 8.2) Running JB 4.1.2. Would this run on it instead?

Has anyone managed to get rid of the CID error message on boot? Also, if I charge mine whilst switched off it switches itself on , anyone else getting this behaviour?

I'd love to see KitKat on the Xoom2. Currently using the Verizon JB firmware and it's OK but a bit buggy, not sure if its this bad on a genuine Verizon device. If I could help I would but I'm an end user/noon so you might waste more time explaining stuff to me than the time I could save.

For the most part I would say it gives a better user experience, based upon the last 24 hours of use. Bugs The dock application has got even worse. I wasn't too bothered when they ditched the linux mode with the ICS update but a lot of people were. I still found it very usable, if a little...

From the responses on here I'm wondering; is the error on boot and need to reboot through BPTools persistent, even after you're done? Would replacing the old cid.img fix this?

I'm considering trying this but reports from genuine Verizon customers say that it actually decreases performance. I remember having an S2 which was never the same after the last update - is it really worth putting this old device on JB?

I had the same question with my S4. After a bit of reading up i gather that Samsung is working on a fully fledged version of S-cloud which should have been ready when the last note handset was released but it's still not ready. If rumors are correct you will be able to view and edit all Samsung...

Cheers for that. Both hilarious and incredibly useful.

Am I the only person that thinks s voice sucks beyond recognition? Google have been good enough and intelligent enough to make offline voice recognition that truly works and then Samsung have to mess with it. I love the interface but it's so distractingly bad at voice recognition it's only a...

Absolutely! Moto made their own even and they're really very good. You can buy just the keyboard and mouse together or they do a work and play kit that includes a dock with 3 USB ports, analogue audio out and mini HDMI plus your HDMI cable, a high power adaptor the keyboard and the mouse. The...

My normal reply to comments like this is that despite whatever new gadgets are released the one you already have works just as well as the day you bought it but in the case of the Xoom 2 ME it actually works better than the day I bought it at a massive discount thanks to the ICS update. Best...

As a bit of a noob can I ask what is the purpose of this fastboot file? Does it gets us any closer to being able to have custom ROMs or Ubuntu Touch?

If this is near fully working by September I'll be keeping my SII instead of upgrading, it looks awesome.

Just got a work and play kit for my Xoom 2 ME and it does the same thing. Bit of a shame really, I hear notifications come in but either have to look at my phone or recognise the notification sound to try and find em. ---------- Post added at 04:31 PM ---------- Previous post was at 04:26 PM...

It looks like 7" is where they draw the line between phone and tablet currently and tablets arent supported yet. As a new user I cant post links here yet but if you go to the official flipboard support page and enter searchterm "tablet" you can see where i got this from and add your voice to the...