Search results

For reference, the newest one I got from Amazon, shipped on Tuesday, 12/02, has the janky power button and doesn't respond to the magnetic cover properly. Sometimes unlock the display results in it relocking instantly (as if it had a magnetic cover on it). Closing the cover on the case doesn't...

The "code": From: http://www.reddit.com/r/Nexus9/comments/2nsqse/how_to_figure_out_when_htc_made_your_nexus_9/

I ordered one from Amazon.com on Friday (11/28) and it was made on Oct 24 (HT4AR). The buttons are better than one I got from Best Buy on 11/03 made 10/ 18 (HT4AJ). Both had the "squishy" back. Unfortunately, the digitizer was messed up and is being returned. Thread...

I ordered a Nexus 9 from Amazon on Friday (11/28). It arrived today. It has the better buttons of the newer models however there are 2 columns of very low sensitivity on the touchscreen. About 3cm near the left edge, 1cm on the rightmost edge. A replacement has been ordered. Has anyone else had...

Any keyboard that supports themes will need Internet permission. The keyboard doesn't need an active connection in order to function. It would be really nice if Thumb Keyboard could have a few material themes put together next, been using it on all of my tablets since my Xoom. The permissions...

I should have included that the camera is set to Auto and that the Nikon app works without issue with the same settings. EDIT: Swiching to M, A, S, P works, thank you. Is there anything I can do to help get llive view to work without first making a capture?

D3200 Firmware 1.01 with WU-1A adapter I've tried the various choices listed here for making liveview work but have not had any luck. I get the following error: "Liveview Prohibition" "The Exposure Program Mode is [Scene mode] or [User mode]" What can I do to help correct these bugs?

Does anybody know how we can get driver support for the various adapters added to CyanogenMod? If we could do that, then native pentesting apps development would surely follow.

We already know the WiFi adapter is the TP-Link TP-WN722N from the photos, with the user manual (Page 13), we know the BT adapter is a Sena Parani UD100 (need to find a more affordable option than the $60 Pwnie Express wants) We also know from the manual that it supports Kisbee (page 14) and...

FTFY The normal calendar has December, just not the calendar on your contacts.

If you followed the instructions, it should work. If the instructions are not valid in your case, I cannot help you, perhaps someone else can. Good luck.

You have to play a full round or it will crash on start up, i.e. you must die in the game. You cannot just start a game and then exit out. Did you finish a game or did you exit the game while in progress?

Follow my instructions precisely (may not need all of them but if you do them all, it will work). http://forum.xda-developers.com/showthread.php?p=32147544#post32147544

When I tried it without playing a full game first, it would crash on start up.

You don't have to kill yourself but it seems you need to at least finish a level so that something gets triggered in the file structure. Just doesn't make sense to put in any real effort if it is all going to be wiped out anyways.

I've got it: Create backup of Jetpack Joyride (Amazon version) using TiBu (just in case) Install Jetpack Joyride from Google Play Play a round (kill yourself right away) of the Play version. Exit the game Force Stop both versions Using a root friendly file manager (EStrong), copy all files...

I made some basic attempts by moving all the files (fail) and then trying to cherry-pick files (also failed). Unless somebody responds with the answer, I'll try again this weekend. So far, I've figured out that if you copy all files named XXXXSaveData.dat from...

My 3rd unit had the auto-brightness issue.

I did this before reading this actually... The display was working better this morning, I didn't need the flashlight to see the screen but I had the bright idea of adjusting the auto brightness... The slider was at ~10%, when the auto box was unchecked, the screen went black and I was unable to...

My third unit arrived today, the screen lift was the best of the three (I'd have accepted it). Unfortunately, the backlight is messed up. During the initial boot, the backlight flickers slightly and once the OS is loaded, the backlight is completely off. I can then tap the power button to turn...

Well, at this point, I've sent back my defective replacement unit and the original defective unit but never got the email to get a new replacement. This means I'm down ~$270 and have no N7. As of yesterday, both units have been received into Google's facility.

As a strange twist, I removed my original tablet from the case I've had it in for the past week and now there is not any noticeable rising problem. Its no great surprise I guess, since the case has been keeping constant pressure on the edge of the screen and has even sat in my hot car where...

Got my replacement unit yesterday. The screen was so loose that I could actually see the adhesive film under the screen. To top it off, there were fingerprints on the screen. one large thumbprint in the middle and lots of smudging on the left side edge were it was separating.

That user's location is NYC, it is most likely a Verizon 3G device (MZ600) (sans LTE module).

wifi = MZ604 Euro 3G = MZ601 This ROM officially supports MZ604 (wifi) but not MZ601 (Euro 3G), I was just trying to state that but you should be careful to make certain you know which model you really have and be aware of the ROM you are flashing.

You are correct, but the fact remains that this ROM only officially supports 4G LTE and wifi models. I'm sure that any assistance you could provide the CM9 team to add official support for 3G models would be appreciated. EDIT: Correct on the lack of experimentation at least, I don't want this...

This ROM supports 4G/LTE (MZ602) and WiFi (MZ604) models only. If you have any other devices (ie: VZW 3G only (MZ600), non-us cellular (MZ601), etc). This is not your ROM. either find a different ROM or return to stock. You've made a mistake, likely by not reading through the pages and pages...

Dock audio works, before you dock, go to "Settings" > "Dock" > "Use Dock USB Audio"

Reboot into Rogue Touch, flash radios from prior link, flash experimental CM9, wipe caches, reboot.

Loaded up the experimental Stingray build with the new radios. First and only issues (thus far) is the message "Unfortunately, the process com.android.phone has stopped." Not exactly a deal breaker. I haven't done much beyond booting it yet and I keep my service on it suspended. It does...

I tried searching for the new radio but came up empty. Has anybody pulled them and made a flashable installer yet? or will I need to restore to stock to apply them?

I'm not on the test build anymore, I can reinstall it later this weekend. It may be worth noting that my reboots were not triggered by pressing the power button and the tablet was in the dock, I'm fairly certain that the screen set to remain on while powered. Clearly, we'll know more after I...

The dock audio was working, however that ROM caused frequent random reboots on my Stingray. If someone can point me towards instructions to pull the logs, I can give it another shot. Google wasn't much help in figuring out how to pull the logs. Thank you for the hard work.

It's working wonderfully on my HD Dock with my Stingray now. Thank you. The last thing I can think of to make this ROM perfect (it's already spectacular) would be the ability to set profiles based on a schedule. Edit: Shoot, just got a random reboot when I stopped the audio. I'll see if I...

Exactly what tablet do you have? Supported tablets: Wingray = WiFi only (global) Stingray = Verizon 4G only Unless I'm mistaken there is no support for any other models, This includes Verizon 3G without the 4G LTE upgrade or any other non-US cellular models. If I am mistaken, somebody please...

It doesn't seems to have worked for me, I'd be happy to ship you a free dock.

If you have a MicroUSB to stereo adapter, it might have the same results. I have not tested it but that is essentially all the dock is.

This is the only problem I have with this ROM, otherwise, it is fantastic.

The media backup can take awhile so I borrowed your batch file to give a menu. I have not tested the restore options and it loses the ability to do multiple backups. echo off SET Today=%Date: =0% SET Year=%Today:~-4% SET Month=%Today:~-10,2% SET Day=%Today:~-7,2% SET...

I'll by it for the reason alone that there is a developer actively interacting with their (potential) consumer base. All too often developers ignore potential markets and opportunities to attract new customers.

Wow, you're the worst lawyer ever. Unless you're a cop/detective, then you just suck at your job. Oh, you're Internet police, well in that case continue spewing BS.

Can't, LTE Xoom is still CDMA, not GSM.

Nomenclature! SD card will work (with OS 3.2), SIM card will not.

Did you remove the file from your cache folder?

The hardware to transmit on FM bands does not exist in the Xoom, cannot happen.

I answered that very question on the last page, FOTAKill.apk

To prevent the OTA, put FOTAKill.apk in your system apps. Reference: http://forum.xda-developers.com/showpost.php?p=13452768&postcount=2 Direct link to file: https://www.dropbox.com/s/u0ygv25a4hr9c9o/XModZ_Rom_Build/%23_2.3.7_%23/XMod-Z_CM-7.1.0/system/app/FOTAKill.apk (source not confirmed...

With mine, I needed to reflash my kernel after flashing the update as well as the root package. Without reflashing the kernel, I was soft-bricked at the red "M" logo.

The problem is almost certainly related to an installed app, if you don't have Documents to Go installed, started removing apps one at a time until the market begins working properly and report back when you identify the offending app.

Search for "Google TV" on the market gets this. Search for "Logitech Revue" on the market gets this.