Search results

Kingroot per the attached has a virus inside it. For those of you who ran it, hard flash and blow out your data.

Download links not working Are the download links not working? OP, could you please update the DL links? My Nook HD+ needs a new ROM BAD. ---------- Post added at 09:37 PM ---------- Previous post was at 08:55 PM ---------- DL links are up again!

Has anyone figured out how to get this game to run on the Xoom?

Does anyone know where to download the older CM Nightlies from Dec 2013? I would like to use the autopatcher on one of these that work. The lastest nightlies all break the autopatcher. Many thanks.

Does anyone know what the process of building a BigPart compatible 10.1.3 nightly is and how it works with Tablet UI? Normally, I grab the nightly and then use Apg 2.6.0.2 to patch the ROM with Tablet UI.

Can someone point me to the right version of the CM 10.1.3 stable Gapps? When I get them from Goo and flash, I get boot looped.

RESTORE File is HERE

For CM 10.2 - Nightly 10/18 Tablet UI made with Autopatcher if anyone needs

9.15 nightly has excessive battery drain. Alarm clock is broken. Sent from my Xoom using Tapatalk 4

Restore File. You should flash this after the ROM+GApps, boot, go to recovery and flash the Tablet UI zip file. The restore file is there if you need or want to go back to Phablet.

I created a Tablet UI using the autopatcher for the CM 10.2, 8.10 build. Files attached. I flashed my Nexus 7 and working fine.

I use Multi picture Live and ADWEx for the launcher and have never had issues with the paper resetting. Can you give that combo a try and see if that helps? Maps update stopped my soft reboots. Sent from my Nexus 7 using Tapatalk 4

I just got a Nexus 7 (2012 version) and wanted to know if there's a way to flash tablet UI on 4.2.1 (JOP40D). I just rooted and put TWRP on it. Haven't flashed a new ROM yet. Also any suggestions on which is a good stable ROM to try on this device?

I am on 7/10 and updated to the new Google Maps 7 and it seems to have cured the intermittent re-boots which caused the Recent Apps to appear empty. So far 24 hrs have passed and no soft reboots (almost always when it is sleeping with the cover closed). Attached is the logs for when it was on...

I use ADW EX and have had no launcher crashes. I have had random system reboots usually while the device is in deep sleep. I know this because I purposely leave apps running and when I wake the device and click on Recent Apps - nothing shows up. Plus my battery graph shows where these crashes...

Tried again. Files are fine. Thanks! Sent from my BN NookHD+ using Tapatalk 4 Beta

The flash files posted do not flash properly. Seems to be corrupted. You get a dead droid image with red exclamation.

Do not flash the 7/6 version on the 7/8 of Verygreen's ROM. It will never boot. Sent from my BN NookHD+ using Tapatalk 4 Beta

On 7/6, random reboots frequently after waking the device. On reboot, the device freezes on the cm logo. Hit power, and vit continues to the UI but with a error saying system UI crashed. Sent from my BN NookHD+ using Tapatalk 4 Beta

Note on the Verygreen 6/29 build - the UI mod 6/23 does not work and will not boot. You get to the CM boot logo and it stays there. It never proceeds forward.

Minor bugs in 6/15. - this is with the tablet UI installed. Not sure if which is causing this. - on lock screen, sometimes, unlocking does not work. Must press power off and then on and then unlock - automatic screen brightness does not work. Setting automatic and then touching settings turns...

I have Verygreen's 6/15 installed with the tablet UI from 6/13. Minor bugs in 6/15. - this is with the tablet UI installed - not sure if it's tablet UI causing this or the ROM itself. - on lock screen, sometimes, unlocking does not work. Must press power off and then on and then unlock -...

Wrong version - comment meant for Ovation.

I just flashed CM 10-.1 3/15 and I can't reboot into recovery via power button menu. Is there another way to do this?

315 is extremely sluggish post install with wipe to cache + delvik.

I am having problems of sleep of death. Everything works fine except when it sleeps. Sometimes it cannot wake up and you have to force a cold boot. Did not happen on EOS nightly 155. Sent from my Xoom using Tapatalk 2

So here's the issue, I can see it in the Play store but it says the Xoom is incompatible. I have 2 Xooms - 1 on EOS 155 Nightly and 1 on CM10 Stable. Both have the same issue. However, it does download on my Kindle Fire on CM10 Linario.

Is anyone running EOS nightly 155 and has Need for Speed Most Wanted in the market?

Cool

I wipe cache and delvik every time I flash and I only had this start happening with 9/28. Thanks for all the hard work!

One thing to note is after copying over the .xml, you will need to "restore" it from ADW and tell ADW to load the new .xml. Simply go to ADW Settings>Restore ADW Settings After that the annoying bar at the top should be gone.

I do notice on 9/29 on wakeup, it sometimes fails to get an IP from an access point its already been connected to. Is there a configuration that would better ensure that it can fetch an IP reliably? What happens is that it says there's NO Internet connection, you have to go to Wifi and...

This is my post that gets rid of the stupid App Bar. You have to replace the adw.xml that I posted and it will get rid of it. There used to be a config that let you get rid of it in the UI bet the developer removed it for some reason...

I left my KF this morning at 100% with no apps running and came back 12 hrs later and it was at 90%. This is on the 9/16 build which is phenomenal. As for MP4 playback, I use only MXPro and on SW decode not HW and have no problems. Even on my Xoom, SW decode performs much better than HW IMHO.

I'm on yesterday's build. Does anyone else have a fc when in system and trying to open storage? Happens every single time. Sent from my Galaxy Nexus using Tapatalk 2

I will say that mileage will vary. On 9/5, it is deep sleeping but still draining about 2%/hr when in "deep" sleep. I'm not sure what is normal given the battery size and what background tasks are running. However, even in deep sleep - cell standby is consuming 64% of whatever it is using.

Ironic on TWA's since I have the opposite exp. However, both on the new kernel seem to have lags when unloading elements from memory. JB and ICS weren't really intended for 512mb devices....... Sent from my Xoom using Tapatalk 2

#1 for sure. TWA_Priv's seems to have a lot of variablity. CM10 pure is the way to go. Maybe publish a manifest on how you do TWA's and build both branches?

I assume you are running JB since your post is from a Nexus 7. On JB, there's typically 3 vertical dots. With ADW EX, they are vertical. You touch those and you can edit, add, etc screens. The other method is to go back into the settings for ADW and allow the gestures for swipe up and swipe...

I could not get 8/28 to install. TWRP says the package is not valid. So on 8/23 - I do see that battery usage by Call Standby is about 64% of battery usage. Is anyone else experiencing this?

Is anyone else having problems flashing 8/28? In TWRP - it says the zip cannot be opened.

Hi for thos of you how use ADW EX Launcher, ADW EX has the extra "App Bar" or whatever its called at the top. On the 7" screen it becomes a nusance because in landscape mode it takes up 10% of the screen. To get rid of it, the .xml config for ADW EX (adw_ex_settings.xml) should have this...

I have enabled but it still will not mount for some reason. I had a forced reboot issue appear as well.

I have the same issue. In fact, I can't get USB storage to work after installing CM10 8/24. But I think the issue has to do with multiple Android USB drives being installed in Win7. I have a TF201 and Xoom and when I plug in the KF, USB reports the TF201 being connected. Of course Win7...

USB Mass Storage 8/23 - crash. On 8/23 - can't enable USB Mass Storage. If I do, it causes immediate crash and reboot. Is there a work around? I can't copy a new version to the KF if this doesn't work or is there another way?

Yes, that worked. The steps have to be: 1 - In Kindle Android - USB and copy the ROM, Gapps, Samsung switcher 2 - Root 3 - Install TWRP + FFF 4 - Boot in to TWRP 5 - Wipe everything 6 - Install ROM + Gapps 7 - Enjoy. Many Thanks!

I wiped /Delvik, /Cache and /System. Do I need to install FFF via Kindle Fire Utilities?

Kindle Fire (KF) is rooted and i have TWRP installed. I downloaded to /sd - the CM 10 build 8/24. [ROM] [CM10] Jelly Bean ROM using SGT7 enhancements [20120824] [Linaro] Installed via TWRP but when it boots, there's no backlight on. I can hardly make out the CM10 boot logo but it never...

In my books - that is SPAM. Never the less, new users of nightlies will find removing this or disabling a little difficult and this post is meant to be informational for all those who don't want opt-out notification.

So an unpleasant surprise in the EOS Nightlies and a few other builds is the inclusion of SPAMWARE called Goo.im. Its a notification app that could double as spyware as well. Its full functionality and the extent it can invade your privacy is unknown. To remove it, simply do the following: -...