Search results

Thank you! I did a search with ES File Explorer for the nightly update file but it did not find it.

Where does LineageOS save its updater files. CM used to save them in /sdcard/cmupdater, but I can't find the LineageOS versions. I want to exclude this folder when syncing my device to external storage. Thank you in advance for anyone who can help answer this question.

toyfreak - Thanks for this post! Based on your notes I did the same thing using an Amzer Qi charger and this works great! The charger keeps up with using blue tooth for audio, playing music, and running waze all at the same time. Thanks again for this suggestion!

Last night I had tried a number of different mirrors and consistently saw the same results. I just tried again using AZ 1 and now see the same MD5 hash. Thanks again for your help and for putting this together!!

Are is the MD5 value correct for VZWm8.3.28.605.4.0P6BIMG.zip. I consistently get 312AE760D9B19572F3AACDDEEF759174 for some reason.

Confirmed. Speakerphone issue resolved with 7/30 build. Thank you! Thank you! Thank you!

more on quickboot & /data - it's definitely this app The issues with /data "corruption" are definitely due to quickboot's implementation. I tried "Holo Reboot" and it does not cause the problem that quickboot does. ---------- Post added at 10:00 PM ---------- Previous post was at 09:59 PM...

TWRP. However, I have no trouble using either quickboot or adb reboot with TWRP and CM running on my Droid Razr Maxx HD. I'm using TWRP 2.7.1.0 on both devices.

This should not be necessary. These issues do not exist with the CM version built for a Droid Razr HD. Quickboot and adb reboot work just fine with this particular CM build. There may be something different about the HTC One M8 build.

Not a problem. I spent most of yesterday trying to figure out what was going on while trying to set up our HTC One M8's to use CM, given how well it has performed on my Droid Razr Maxx HD. It wasn't until I saw the notes in this thread that I realized what was happening. I was using adb reboot...

Sorry, but as noted in my previous post, my /data partition became corrupt even after doing an "adb reboot recovery", which should be supported. As a side note, I do not have these problems running a Sense-based ROM (e.g., Viper One). I can run both quickboot as well as invkoe "adb reboot...

Quickboot/adb reboot still corrupts /data with latest nightly CM build There still seems to be a problem with the use of quickboot, or even adb reboot recovery, with the nightly CM build, as of the build from 7/21/2014. Doing either of these actions will cause the data partition to become...

Thanks. I'm inquiring now. I believe I found the xda dev for this device/port. Thanks again.

Have you been able to get this version to boot? I could not for some reason. I ended up in a boot loop. I am running stock 4.4.2 on a razr maxx hd with an unlocked bootloader.

After reading the following... http://forum.xda-developers.com/showthread.php?t=2789743&page=3 I believe my assumptions are correct. Most roms have not been built to support the new KitKat bootloader. Does the Paranoid team have plans to do so? Thanks again!

... and a related question ... although I don't know exactly what has changed, but would anyone from the paranoid team be willing to build this rom for installation with the kitkat bootloader?

Does anyone know where I can get a copy of the pre 4.4.2 OTA bootloader? Based on some testing that I did tonight, I believe that the reason I cannot install these roms is because I'm now running the new KitKat bootloader. The reason I say this is that I can only run versions of CWM and TWRP...

Thanks so much for the reply. I figured that this might be the issue. Given some comments associated with the LiquidSmooth rom that I was able to boot related to needing to be on the 4.4 bootloader, I'm wondering if the bootloader has changed in some way that is preventing my ability to boot...

I've tried other ROMs, including cyanogenmod, with similar results. I was only able to install LiquidSmooth KK 3.0 and have the device boot successfully.

I know that. System and data were both wiped as well. Sorry for not being more explicit.

I should also note that I have wiped both the davlik and normal caches before rebooting from recovery. The result is that the device sits at the Motorola Dual Core boot screen and never boots.

For some reason, I cannot boot after installing pa_moto_msm8960-4.4-RC2-20140617 on my Motorola Razr Maxx HD. The device was upgraded to stock Android 4.4.2 and I'm running TWRP 7.2.1.0. Does anyone have any ideas as to what might be wrong? I've restored back to stock at this point. Thanks in...

Check to see that you do not have Google+ Backup enabled and aren't running the XDA app. I found that after I enabled Google+ Backup support this app ended up consuming more cpu wake time than any other app and causing my battery to drain. I had similar issues with XDA. After disabling the...

If you are having battery problems, see if you have Google+ Backup enabled. If so, try disabling it. After having enabled it, I found that my battery was draining faster. Using Wakelock Detector, I found that Google+ was keeping the cpu alive more than any other app. After disabling the Backup...

I''ve seen the same issue (HTC backup not remembering selection). You are not alone. I might try reinstalling HTC backup. Sent from my HTC6525LVW using XDA Free mobile app

Amazing! Something so simple!!!!! That was it. After pulling my sd card the message went away! I don't know why I did not notice this before, and that is the difference between the two M8's that we own, one has an sd card installed and the other does not. Placing the sd card in the second device...

Thank you everyone who responded.

This happens both connected with USB and without. I have a second M8 that does not exhibit this problem. It's something that I've done and I can't figure out how to undo it. Thanks again.

I even went so far as to restore a backup I had of stock which needed an upgrade, restored the stock recovery, locked the bootloader, and took the upgrade. Still no change in this behavior. It's as though a flag was turned on such that the bootloader thinks it needs to run diagnostics. The only...

Press and hold the volume down, then at the same time press and hold the power button (both should be held now). Wait for the screen to go blank. When the screen goes blank, release the power button, but continue to hold the volume down button. You should then eventually see the fastboot/hboot menu.

Somehow when I select HBOOT from the bootloader screen, I see the following messages appear. Does anyone know how to clear these? They don't seem to affect the behavior of the ROM. I'm running Venom 1.5.0 at the moment and I cannot for the life of me figure out what I did to cause this. Thanks...

Maybe a quick search feature within tweaks to find a particular setting might help? Still probably more work than it's worth. Sent from my HTC6525LVW using XDA Free mobile app

A second vote for Viper! This ROM has been fantastic. Performance is much improved over stock, battery consumption has been lower, and there are so much customization that can be done through Viper One's tweak configuration (including enabling Power Saver mode which Verizon took away, performing...

It took a little getting used to overnight, but I actually like the Venom's navbar customization now over stock. I too was a bit confused by the fact that the stock navbar disappeared with this update by default. In the future, the devs might consider keeping stock by default with a notice in...

I believe it's used with the car app. If you invoke the car app, then tap on the screen with 3 fingers it will bring up this utility. It's the same thing as the google's search widget if you tap on the microphone. I don't know if one is better than the other. I also thought there was a way to...

The fastboot command to flash your recovery is: fastboot flash recovery recovery.img where "recovery.img" is the name of your recovery.img file on your host computer. Don't use "fastboot flash boot recovery.img", as I believe this will flash your boot partition, not the recovery partition.

Is there any way we can set up a forum beneath the main Verizon HTC One M8 thread for just OTAs. One where we could quickly identify whenever a new OTA has become available from Verizon? My fear with being rooted with a custom ROM is that we will miss seeing that a new OTA is available and...

I can confirm that the UNLOCK works on a Verizon HTC One M8 device. I just did this to mine after having used "fastboot oem lock", which changes the state to "RELOCKED", not "LOCKED", and I wanted things back the way the were before having run the fastboot command.

Suggestion for the future... It would be useful if firewater would unlock the boot loader even if the device is already s-off'ed. At the suggestion of HTC, I reloked the boot loader on my Verizon HTC One M8 using "fastboot oem lock". The state of the boot loader shows "RELOCKED". Attempting to...

This is not unique to an unsecured kernel. I have the same problem with the stock kernel. I'm guessing Verizon's bootloader doesn't support this command. I tried running the latest version of firewater and it simply reports that there is nothing to do, probably because the phone is s-off'ed.

Not all class 10 cards are the same. Speed can vary from 30 to 80 mbs.

solid leather case, fits htc one m8 w/ otterbox commuter case installed Try the following. google "moonshine leather cell phone" I can't post a URL because I'm new to the forum. This should bring up the Moonshine Leather Co. I ordered both the horizontal and vertical "Colossus" case. This...