Search results

You have to download the file that is posted on post316, format a usb in FAT32 and unzip the file and put it in that usb, change the dmcu to your screen resolution, now you put the usb in the device and start the multimedia and he will only take it and the screen will be fine.

Ok, mate, there are the files, a small manual is in Chinese, but more or less it is understood, there I leave it, sldsssss ..

Good gentlemen, thank you all for helping me, I will explain to you it already works, I will leave you some pictures, the Chinese (Seller) sent me two files dmcu.ext (screen: 13) and hct.aut (empty), format the SD card to FAT32 and I put them in, I put it in the SD slot of the device and when I...

Ok according to the compi suchar20 says to update the image first in usb formatted to FAT32, and then when it is finished reformat the USB and copy the two files .img and .ext and update the MCU, I think I got it, thanks So I will and I tell you

Ok thank you, I look at it and tell you something, thank you.

Ok, I have the last dasaita I imagine it will be to install it again by usb, and the dmcu.img but there are two files, before you disjisted three, the dmcu.ext is missing, which I imagine is mine 1280x720, then I put the three files in a usb or I go one by one.

Okay, you can give me the link of the files that I don't even know where I have them, thanks. And what do I update the MCU or how do I do it, if you can tell me? I never miss the three files

If I did, I put the MTCE_HA3.78_1, But look at the screen, in the end I'm going to have to put it back in again or what do I do?

If I did, I put the MTCE_HA3.78_1, But look at the screen, in the end I'm going to have to put it back in again or what do I do? I was wrong and I put it back, forgive me.

Well gentlemen, this is going little by little, I have almost the screen, but it is not all right, then when I hit the touch if I move to the right goes to the left, I mean the other way around, and so on, I imagine that I will return little by little, I have gotten into car settings, but It...

Hello gentlemen, I just managed to get my 1920x720 dasaita equipment on a monitor, I put an MTC that was not yours and it gave me an error on the screen (see photo) when connecting to an external display via HDMI. I was able to change it thanks to a post from a fellow member of the forum, I...

Well gentlemen, I just disassembled the px6 board, I removed the motherboard and I think I have seen the five holes that you see in the first post in the middle of the board you can see them, if you can confirm that they are those, and the The problem I have is that they are not identified, how...

That's why I've put it here marchnz, because mine is a matter of MTC, which has blocked me, but if it doesn't go here if you could tell me where it goes I would appreciate it, but I don't see anything with the px6 board, thank you.

Hello, I have a sterio with a PX6 board, I tried to update the MTC and I was left with a blue screen and a vertical line, I can recover it with the ST-LINK / V2 I have his MC from the seller if so I have to do the steps of the first post, thank you. I put some photos of how it has been and the...

If that's what I think, everything will continue the same when I try it for someone else, but I have to discard things.

The canbus that according to the seller is the CB006 which is the one I have on, it hooks well or this is some faulty connection or I do not understand it, because if the rest works, to see if I do the test with another CB006 to discard things.

The original radio that brought if it was a touch screen, with integrated gps the TOM TOM GO, which is lost, and it marked all the data in settings, what surprises me is that everything works except the doors and the A / C I don't know what it could be I have to continue investigating

Well, there I send you a photo of what the seller puts in his ad, here comes the A / C, and the information of the door.

What doesn't work is: - Open door information - A / C information That is when I open the door, the screen does not detect anything and when I put the air conditioner it does not put on the dataisa screen.

Hello, I took a Max10-cp-hd dasaita, and installed it in a Peugeot 2008 GT Line from the year 2018, I ordered the Canbus CB006, according to the Aliexpress seller it is mine, but it does not work for me when I open the doors it does nothing the screen and when I give the A / C either, I got into...

Video en movimiento As I can deactivate the movement of the video, every time I play a video in motion it is not seen but if it is heard, I wanted to deactivate it so that the companions can see it, in a double din, thanks.

Thanks to all, and it has been solved, the problem was the card, in case someone happens again, the card does not work well, the SD card must have some failure, because I have tried it with another one and it works perfectly, what is said thank you for your help, greetings.

PX3 It works to all the SD in the slot that puts MAP, in a double Chinese din, it does not work for me, if you can give me the solution, in the MICRO SD slot if it works, but not in MAP, what problem can be , Thank you.

PX3 Hello, the first thing I'm sorry for my bad English, I have a little problem with the malaysk image, when I put the SD in the map slot of my px3 it does not read it, it tells me that the format is not compatible, it takes me to the configuration of the SD card and gives me the option to...

PX3 Hello, the first thing I'm sorry for my bad English, I have a little problem with the malaysk image, when I put the SD in the map slot of my px3 it does not read it, it tells me that the format is not compatible, it takes me to the configuration of the SD card and gives me the option to...