Search results

My usim can use VoLTE in iPhone SE but not X Perfirmance, no VoLTE switch show. My phone is hk version. Found overlay in oem partition, volte only support hk operator

SO-02E have different baseband, my modify can't work on SO-02E, you can try this http://forum.xda-developers.com/crossdevice-dev/sony/thread-progress-please-leave-im-updating-t2871269, may work or not. ignore setp 3 setp 12 use device MI_05 replace MI_04 also should change driver inf file...

try flash this file http://pan.baidu.com/s/1qWwokA4

Sorry I can't help you, because my main hard disk broken and all data lost. My friend send me the c6603 n9kefs1-3 dump, and I use dd write theme to my phone, but this is not the best way and have some problem. You can see my post, I build a ftf can change baseband config If you want flash to 5.0...

use dd

this ftf only modify baseband config, and drm area in TA can not be directly written by Flashtool(I tried write back up DRM key use Flashtool but failed, tell me no authentication). but I still want to tell you to back up TA with flashtool raw mode first. I have test on my Xperia Z L36h...

Is this work? [email protected]:/ # insmod /sdcard/byeselinux.ko insmod /sdcard/byeselinux.ko [email protected]:/ # getenforce getenforce Permissive [email protected]:/ # dmesg | grep byeselinux dmesg | grep byeselinux <6>[148736.620170] byeselinux: module loaded <6>[148736.638419] byeselinux: old selinux_enabled 1...

I think I can not help you about this problem.

selinux_enabled is 0xc0ece5dc if sel_read_enforce is c0302688 then selinux_enforcing is 0xc10565e4

All addresses taked from my build, if these addresses can work then we don't need found them with IDA fusion3_pollux_defconfig Xperia Tablet Z Tablet SGP351/SGP341 c0305638 T selinux_is_enabled c0ece5dc D selinux_enabled c10565e4 B selinux_enforcing fusion3_pollux_windy_defconfig Xperia Tablet...

In my case selinux_is_enabled,selinux_enabled and selinux_enforcing are same in System.map. but some address are not same.

I use aosp gcc4.8 arm-eabi- cross compile,and get some symble same address. first you need unpack piggy.lzo from kernel image may help script(I down this with winhex) second use lzop -d piggy.lzo get striped vmlinux binarry name is piggy. cat /proc/kallsyms > /sdcard/kallsyms and take it on...

Sorry for my English. I mean is to find the address of each device, may be a hard work but feasible，

yep, I think we can make these addresses as kernel module parameters and let it work for all other Z devices

I have successful get byeselinux work on my xperiz z I have build kernel with offical source and default config, and use IDA compare my self build kernel with offical kernel, and try to find symble address. Then found selinux_is_enabled address is 0xc03052dc (can find in /proc/kallsyms ) it is...

NamenIos McBane87 can this help? echo "0" > /proc/sys/kernel/kptr_restrict cat /proc/kallsyms | grep selinux then get from my xperia z

I get xposed work fine on my Xperia Z, but some module may not compatible.

xperia z 10.6.A.0.454 firmware does not have /system/lib/module/nls_utf8.ko and /system/bin/mr moved to ramdisk /sbin/mr, and can't get any boot log file on sd card because mount sd card failed. nls_utf8.ko will load when use exfat sd card, I try to remove this module load command but still get...

I got exception when download obb from google play java.lang.SecurityException: Destination must be on external storage: file:///storage/sdcard1/Android/obb/com.gameloft.android.ANMP.GloftA8HM/temp.main.18143.com.gameloft.android.ANMP.GloftA8HM.obb at...

In Sony Update Engine, I get some TA info from jar package. in com.sonymobile.cs.device.io.s1.protocol package: public static final int PARTITION_TA = 1; public static final int PARTITION_MISC_TA = 2; in com.sonymobile.cs.ma.domain package: public static final byte NORMAL_TA_PARTITION = 1...

you need add udev rules http://forum.xda-developers.com/showthread.php?t=1612273

run as root, you can remove 000007D3,000007E6,000007E7, 00000A00,00000A01,00000A02,00000A03,00001324 lines in 2.ta 000007D3 a SIN file contains imei 000007E6 MARLIN data 000007E7 a cert file contains imei 00000A00,00000A01,00000A02,00000A03 WLAN MAC assress 00001324 device Id

Address is not important, token will same,there is a service hinder me to upgrade to 4g on my card, this month is no hope, I will try in May, can you send me a S1 dump? I will do some compare.

Here is a unlock test baseband 1. Try it at your own risk 2.before you flash it, backup your TA first, you can use Backup TA or flashtool 'Advanced->Trim Area->Backup' 3.You need to use my modified version flashtool to flash it 4.flash modified baseband ftf and reboot will get it work 5.SO-02E...

my device is L36h chinese version c6602 New discovery modify ta can change default band config when I read /nvta_log/log.txt in efs I fond this 0010346 Selecting band configuration file 0010346 Selected band configuration file '/nvpreload/nv_W12458.bin'. 0010348 /nvpreload/nv_W12458.bin removed...

may get lte work, my card does not enable 4g so can not connect to lte network, but my phone success found lte network single

guild same as http://forum.xda-developers.com/crossdevice-dev/sony/thread-progress-please-leave-im-updating-t2871269 ignore setp 3 setp 12 use device MI_05 replace MI_04 also should change driver inf file USB\VID_0FCE&PID_5146&MI_04 to USB\VID_0FCE&PID_B146&MI_05 ps lte doesn't work I try to...

I have successful enable lte bands on my L36h(c6602) install htc driver on USB\VID_0FCE&PID_B146&MI_05 device but if i select lte, device will crash and reboot

That is the latest busybox issue, rollback 2 commit will work again Sent from my LT18i using XDA Free mobile app

work only on xperia japanese keyboard called POBox Touch

no error,but I see is still used the original compiler via 'ps -x' command, I‘m not sure which setp will use ANDROID_EABI_TOOLCHAIN, and I see another post http://forum.xda-developers.com/showthread.php?t=2330970 about Compile Xperia Z ROM with Linaro, it replaced ndk

Building with Linaro 4.8 toolchain doesn't work, gcc-linaro-4.8-2013.06.tar.bz2 is source file, I also tried the following file http://releases.linaro.org/13.06/components/android/toolchain/4.8/android-toolchain-eabi-4.8-2013.06-x86.tar.bz2 and modified envsetup.sh but still doesn't work.