Search results

thank you for your work ChazzMatt

https://forum.xda-developers.com/android/help/s5-sensation-rom-v10-0-stuck-wiping-t3343822 "I am rooting my Samsung Galaxy S3 i9300 and installing S5 sensation Rom in it using TWRP. But it got stuck in Wiping Data at 41% of installation and it now going further from more than 30 minutes. What...

update

make an image and flash to a stock v30 and get it as it was before? is there a way to make an image of the whole phone backup and to flash later from stock, with lgup and somehow to get everything (twrp, unlocked bootloader and all apps+) just to flash when you have a stock rom, and then its...

it seems that you are right, the back with glue, never opened. was loose are there ways to heat and reseal the back-cover, if it is just a little loose on one side? without a hairdryer or heatgun? if anyone knows

ok so you mean that "back panel wasn't closed completely properly" as example that i should get a rubber-hammer and put something soft, to make sure the back-panel is fasten enough, so the sensor is placed more correctly so it works better in the future, because its not fasten good enough? :)

ok thank you do you know if there is any specific codes for the service menu on LG v30? as with "service menu in Samsung phones , dialing '*#0#' takes you to a menu to check and confirm that most of your hardware components are working properly or not " so its possible to check your...

so if i use: "Use Refurbish mode or Partition DL mode (choosing all Partitions.)" i will just have to: "re-lock the bootloader via fastboot."? and then all is original stock? link to relock the bootloader via fastboot: https://www.theandroidsoul.com/relock-bootloader-fastboot-android/

do you that are more into the info: if there is a thread of post of: how to flash everything to original, the bootloader and everything? is this it? https://forum.xda-developers.com/lg-v30/how-to/guide-how-to-upgrade-downgrade-restore-t3738917 and is there a way to make an image or some...

it could have felt down, but not very hard, there is no damage on the phone itself what can i do? should i open it up to check if the parts are connected, as it can have left loose after some minor falls on the floor?

I've getting the fingerprint reader on the v30 to not work properly And it says it needs restart Are there some things to do. To fix this? It's a bit bothersome everytime you want to use the phone :)

Do you think it will work with a Android TV from Philips with pie? If he would be able to do it?

now it is not possible to login and an error code

Application is incompatible with this device it may mostly work on Shield, but others may not work as good with Android TV

hi what kernel and download for: [H930][STOCK][PIE]LG V30 European open market H93031a_00_OPEN_EU_OP_1105.KDZ ? Stock Pie H930 V30 EU?

does it work with pie also?

It has stopped working as good. Showing more ads

ok haven't seen any info, so wanted to ask there is some false information, so i had an idea of it good to know, thanks for your effort, would be good to have it more easily related in a search for it

"LG V30/V30+/V30S ThinQ Android 10 update Only the V30S is eligible for Android 10 The update could arrive in Q2 or Q3 2020 LG V30 and V30+ are not eligible" https://www.theandroidsoul.com/lg-android-10-update/#lg-v30v30v30s-thinq-android-10-update if V30S would get an Android 10 update, would...

Will you be able to update the Android TV version? to a newer version

on the LG V30 has anyone here, found a solution for the low volume on top earspeaker on the phone, the speaker you use when you have the phone at your ear? because its better on pie, still the volume is very low.

Does anyone know how to get HIM all the time like with whiskeyomegas mod and anxious, on pie with EU LG V30?

if its possible to manually edit the mixer_paths_tavil with lower and higher value what values to change to do make it higher and lower?

k thank for the help, it went quite smooth this time, have to wait til your update next time

i resetted it so its okey, still if you installed the original and not fully encrypted, if its possible to revert the original rom and update, without losing the data and resetting

i wonder what values i can change for the headphone in mixer_paths_tavil, to choose headphone volume

I wonder if you want to have it more precise and control when using the high impedance mode and want to control the volume in mixer_paths_tavil for the headphones and the speaker top and bottom speaker what should you change for value? "Speaker Volume is not present in the mixer!" Code...

i wanted to update today, couldnt find any specific information on, exactly what happened when upgrading with official release without all the: Removed dm-verity Removed rctd (LG's root checker tool daemon) Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no...

will you update this thread today, with the new update?

does it work with h930? Seems that the bottom speaker stopped working, and no microphone in call

Is there a fix for low Call Volume, on the front speaker on top? the call volume is so low, is it possible to make it louder somehow?

any news on an update and tweaks - addons for this rom

If you are using boombox 21a h930 with magisk root, and unlocked bootloader, can you update to latest stock by flashing latest and still have all unlocked? what is the latest build, and how to flash to have all unlocked?

anyone has a failure when calling, with music that its only left working and sometimes right left with headphones work And not working bluetooth ---------- Post added at 09:35 PM ---------- Previous post was at 09:33 PM ---------- when are the updated latest lg v30 rom going to be released...

wondering if the 6P, is as good in audio-quality as the other flagships? (with headphones) can you increase the volume as loud as other devices, with headphones + all audio-tweaks with this rom?

is there a good way with this rom, to increase the volume for music, within a kernel app or by a script, a flashfile? or any method that you manage to do it seemed that the default_gain.conf, was not there when i searched for it, can i add one, or is the volume controlled somewhere else with...

how would the install procedure be, if i want to install magisk on a Samsung S3 i9300 and a Samsung Note 1, N-7000 do i have to go back to all original stockrom, or would it work with a stockbased rom? there is only android 4. stock , on both i believe

Is there any app to control the sound, or something like boeffla kernel that works with this rom

Viper4Android doesnt work, and the settings are stopped with error Viper needs to get installed all the time, and stops the music and not working Anything that can get fixed soon, if anyone knows? Excellent build, thanks for fixing this

screen is flashing/blinking when its locked, is there any fix for this?

screen updates is allready unchecked any one else knows how to fix this thing, or what can be the cause of it?

Samsung Galaxy s3 Blinking/flashing when on lock screen, how to fix this?

there is an error when using CWM do you have any other option on how to install it? something that updated the system and puts the files in right directories, so it will work?

there is an error with cwm, do someone have a complete guide, how to install everything, so it will work?