Search results

Same for me. Call recordings records but ther is no sound... eng.stk , any Ides? Thanks

Dear eng.stk. I notice something wrong. I flash your kernel and 1 - in Settins, Parallele space force close 2 - Call recording is broken. it records a file but cannot hear I try with the Original Kernel , no Problem. I made twice clean flash and the problem come back... Any Idea?

Hi... I have issue with the Call recording... It dont work , i am in Frnace, it records but i dont hear anything... Any else ??

Heu... when i click to the link i become this message... FORGET I FOUND ....

Thanks a lot... But i am unable to download your Kernel... Link is dead?

Hi eng.stk. I am running R194 with OOS 9.0.11 and i want to upgrade to 10.0.1. Should I flash further my original BOOT.IMG in order to falsh corrrectly, or can i let your kernel and than flash 10.0.1? Thanks a lot.

Hi. I am with OOS 9.0.11 , Magisk 20.4 And TWRP 3.2 3.1, , custom Kernel ( Blu_Spark 194) and Substratum. Should i flash my original BOOT.IMG before clean flash OOS 10.0.1 ? Thanks . Do Substratum engine work with OOS 10.0.1?

Ok Thanks for your report.

Hi eng.stk, can I flash R198 on 9.O.11? I am still with R 194.. Thanks

Great update ! Work like charm and battery life is awesone . Thanks for your job eng.stk !

Thanks for your report eng.stk. Yes i am using Magisk modul with only Betas with your R171 kernel, without any problem.. But with R186 my ram usage is 80% (100% for zram??? ) and battery drain a lot. Can I go back to R185 only with flashing R185 ????? Thanks a lot for your amazing job !!!

hello, Thanks eng.stk but I have an issue with R186. Battery drain a lot and ram usage is about 80%, with R185 i was 50%... Any idea? ( i run Beta 33 and EX Kernel manager pro with the same Setting... ) ---------- Post added at 11:12 AM ---------- Previous post was at 11:12 AM ----------...

Can I use the LKT Magisk Modul with this Kernel?

Thanks you eng.stk Yours kernels are the best , i am using since a couple of month and all run fine ! Thank you for your job !

No, I made a fresh install yesterday with OP30, than flash Magisk, and than your kernel.... Trying today with a normal day of usage and hope my phone get into deep sleep mode !! :);)

I, I try this kernel since yesterday. But my phone dont get into Deep sleep, my lowest cpu frequency still is 1248 MHz.. Any idea why? Thanks

I, Thanks but I only uninstall Magik, than flash my Boot recovery through TWRP , reboot, and flash Blue Spark kernel without problem !

OK thanks! But should I flash my original boot backup before I flash the Blue Spark kernel?

I. I am noob with Op 5t. What is the difference between Blue Spark kernel and Elementalx? Which is the best for a daily usage? I am under OOS beta 29,with at the moment elementalx kernel. I made a twrp backup from my original boot. In order to flash Blue Spark kernel, should I restore my boot...

Hi. You have to flash stock rom via flastool than install snapchat and than, but only when youre loging into snapchat, root the Phone

Hi, You made the same question into the Elite Rom 7.7... Try this https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985

Hey, dont CRY !!! Try to flash Magisk and see if it works !!! ---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ---------- Hi, see this post https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985 Working fine for me a lot !!!

Thanks a lot. After reflashing Kernel 7.3, depp sleep worked. But after a few hours, my phone get lagging... Go back tu Elite Kernel 7.2 wich work fine

Hi, Thanks for this kernel. But I have a little problem with this kernel. Deep Sleep dont work. With Elite Kernel 7,2, it was 82% deep sleepi. WIth Elite Kernel 7,3, only.... 4%... Any idea why? Thanks a lot !!!

Thanks your the BEST

Hi HassanMirza01 , could provide link to Elite Kernel 7.1? Thanks in advance !

No you have to extract this from your update.app using this post... https://forum.xda-developers.com/showthread.php?t=2433454

Hi, you have to flash Vendor + boot.img + recovery.img+system.img to go bask to stock via fastboot mode...

Hi, Use this method in this post to go back to stock rom ! https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985

Hi, i received today a notification concerning this update B372.... I use Magisk and xposed.. How should I do to properly unistall Magisk and Xposed to be able to udate my phone?

It is wrong.... I use Magisk Version 16 with xposed modules, and all work fine. I dont know witch version from Magisk you use because i dont have any problem with Magisk...

Thank you for the report !!!!!

Ok. Try to wipe any partition (systeme, cust, vendor, version, product.. ) via twrtp, then flash any partition you wiped via fastboot.. Sorry didn't get that...I have to flash any partition via twrp and then flash same partition via fastboot ??? No.. Flash any partiotion via TWRP using TWRP...

OK. Then if you want to go back to a pure stock rom , it is not so easy. The phone boot yet? Wich build number do you have? Its rebooting....my build number is bln-l22c675 Ok. Try to wipe any partition (systeme, cust, vendor, version, product.. ) via twrtp, then flash any partition you...

Order ?? I already flash vendor....do I need to flash it again?? Yes try to flash this again, and PRODUCT and VERSION but via fastboot. Anyway, even if your build model is GENERIC, no matter, the phone work like a charme.. All failed ---------- Post added at 12:55 PM ---------- Previous...

---------- Post added at 12:40 PM ---------- Previous post was at 12:39 PM ---------- And its not even resetting...when I start factory reset it restarts and some factory reset low level mode is open and in the middle of process it fails.... Ok. I was happening to mee too. Generic A15 and...

---------- Post added at 12:24 PM ---------- Previous post was at 12:15 PM ---------- I installed twrp....its showing no os installed...so should I flash vendor now ? Should I format data coz its in f2fs mode ?[/QUOTE Failed to mount /product If you are in TWRP. Wipe anything. Then reboot...

---------- Post added at 12:24 PM ---------- Previous post was at 12:15 PM ---------- [/COLOR] I installed twrp....its showing no os installed...so should I flash vendor now ? Should I format data coz its in f2fs mode ?[/QUOTE Failed to mount /product If you are in TWRP. Wipe anything. Then...

---------- Post added at 12:03 PM ---------- Previous post was at 11:56 AM ---------- You can flash TWRP without problem via Fastboot. And after flashing, reboot and hold VOLUME+ to enter in TWRP... Then flash via TWRP VENDOR.img and reboot into fastboot mode to flash the other files...

Ok, so flash VENDOR.IMG via TWRP and then reboot into fastboot mode and flash BOOT, RECOVERY and SYSTEM. There is no twrp...it got removed when I roll back to stock.. You can flash TWRP without problem via Fastboot. And after flashing, reboot and hold VOLUME+ to enter in TWRP... Then flash...

I hope it solved your problem. For me, i made this things a lot .... Its not taking vendor.img FAILED (remote: command not allowed) Ok, so flash VENDOR.IMG via TWRP and then reboot into fastboot mode and flash BOOT, RECOVERY and SYSTEM.

Enter in Fastboot mode. Flash via fastboot in this order : VENDOR.IMG, then BOOT.IMG then RECOVERY.IMG then SYSTEM.IMG. Reboot, if you are in recoevery to download latest firmware, reboot in stock recovery and wipe factory reset + partition.. I'll try it....thank you so much for...

Whats Failed? Had you rollback to stock using the stock .IMG? There is no stock.img file ---------- Post added at 11:37 AM ---------- Previous post was at 11:36 AM ---------- Plz guide from scratch Ok Download latest stock firmware your region. Extract from UPDATE.APP this files BOOT.IMG...

Okk I'll try:good: ---------- Post added at 11:31 AM ---------- Previous post was at 11:24 AM ---------- Okk I'll try:good: I tried but it failed....can tell me how to flash those file ??? Whats Failed? Had you rollback to stock using the stock .IMG?

[/COLOR]Is there any series of flashing it or should I flash anything first?? I dont remember how i made it. I was return to stock rom, but after 2 reboot, the same recovery wich asked to download the lastest stock rom. Try first to flash vendor.img then reboot then if the phone dont boot...

So, try to flash vendor.img, product.img and version.img via fastboot, i was helped me when i had the same problem....

I had the same problem further. You have to enter in Recovery (stock recovery) and wipe factory + partition, it solved my problem.

will upload it tomorrow... have them ready but upload is a bit issue and also, am tired now... will do it tomorrow... Thanks you a lot HassanMirza01! Waiting tomorrow !

hi HassanMirza01, could you update your kernel V7 too , in order to download this separately?? thanks for your amazing JOB !!!

Hi ! Fantastic ! Could you provide this kernel, i would like to test this ? HassanMirza01