Search results

Hey all, I am just after stumbling across this, and it's too late in the night for me to start installing it (1AM), but I will be having a go tomorrow. I was wondering if Netflix works on this rom (Tanix TX3 mini) - Not UHD obviously, maybe HD or just in general? It's not important, I was just...

All good thanks. I disabled the PIN, and it seemed to still ask for a PIN, so I rebooted the phone to recovery and wiped cache (again). Rebooted with original sim in, and back to normal. About three more reboots and it seems to be okay. :confused: If I get some time, I will give her a spare...

Thanks, but I can't find that setting and I have loked everywhere that I can think of :confused: I would not be satisfied with stock rom but I bought the phone for my mother and she is happy enough with it. She only uses it to play bridge, make phone calls and browse the internet. I have...

Stock Rom, not rooted. Bought unlocked phone last Christmas from Geekbuying. No issues up until today, I got a new sim and when I put it in (sim tray 1 or 2) I am asked for a PIN. But it is not the PIN that came with the card that it is looking for. When I have no sim card in, it looks for a...

Thanks, does it require a config xml file like the two in OP?

Thanks again. I am not sure I am looking at the correct patcher. It brings me back to the Deodex page. ---------- Post added at 07:51 PM ---------- Previous post was at 07:42 PM ---------- Ooooppps... I have dones something wrong now. Phone is powered on black screen and com 4 HS-USB driver...

Thanks, I haven't heard of that before. No, not yet, because I started fresh, I was following the Nanodroid Guide to the letter, and only got to Deodex Instructions. So should I install Nanodroid Patcher after Nanodroid? How to install Nanodroid patcher in the repository after I install Nanodroid?

Thanks, I have Ubuntu on another PC, so shouldn't be too hard. How do you mean a different distribution? Another rom? I'm not sure if that is what you mean, but unfortunately there are no roms other than stock (that I know of) for this phone. (Moto G7 Plus)

wiped and started from scratch again. I have installed Signature Spoofing Checker and it is disabled. I see My phone is on Android 9.0, so do I require a Linux PC, or would it make much difference? If I install Nanodroid from TWRP I will likely hit the same issues with Whatsapp, is that correct?

Thanks for the help. I have wiped and started again, and can boot into it no problem now :victory:

I flashed/permanently installed it using the guide from the OP, but can't boot into it from that menu. I will wipe and start again, as I am having other issues, and was going to anyway. Also my folders are garbled names, like in this

Yep. Hopefully :) I will definitely know the first few steps etc, and might see where I went wrong. So it should be a good thing :)

Thanks, not troublesome. Really weird. My mother found it a bit worrying. I think I might wipe and start again, I will try two of the other suggestions first just in case. I have fake store on it now.

Thanks, I have Aurora, I don't have Fake Store, will look at that now.

Thanks, I don't think it supports signature spoofing (stock rom). I will try patching the nanodroid patcher. It's going to have to wait, I just got some really weird news at the door. But thanks for your help, hopefully I will be able to get it done with that.

Thanks, I see that now :o No, I hadn't installed NanoDroid before. I have installed it on Moto G7 Plus and tried whatsapp, last app (I have telegram and signal) No tick for System spoofs signature, No tick for Play Services (GmsCore) has correct signature and No tick for Play Store (Phonesky)...

Thanks. So GCM was disabled, I tried to enable GCM and tried again, seemed to make no difference.

I am getting "Whatsapp won't run without Google Play Services which are not supported by your device" so I disabled battery optimistation for whatsapp and rebooted, but no difference, I am still getting that issue. I am using the latest (stable) version of both Nanodroid and Whatsapp

I have TWRP installed, and I have what is no doubt a really daft question.. But.. How do I boot into TWRP? I have tried Power + Volume down - I get the bootloader with options: Start Restart Bootloader Recovery Mode - Brings me to the 'no command' screen Power Off Factory Mode BP Tools - Seems...

Thanks, I have started to look at NanoDroid. Yes I am on stock. On Moto G7 Plus. I had rooted it using TWRP 3.3.0, and notifications started appearing for a system update, but the update failed (apparently Motorola have stopped delivering OTA to unlocked devices). So I updated following...

I am in the same boat. I'm after following all of the instructions, and I have read through the thread (quite a lot of it), and removed everything, reinstalled, tried the module. I basically have nothing under "Webview Implementation" after I install Bromite System Webview, I removed Google...

I am going to try and update now as the notifications are much too annoying.

I hadn't heard of fossdroid.com or fsfe.org when I posted here, and reading over some other post on other forums I debloated quite a lot and replaced them with many of the alternatives on f-droid and fossdroid.

I would like to remove as much unrequired google apps as possible before I start to use the phone. I have installed TWRP and now Termux. I was wondering if anyone could help with which are the best/safest apps to remove and any suggestions for a preferred (possibly FOSS) replacement. So far I...

Hi guys, I see Google Camera ported to a few phones, may I ask, what is so good about it? Is it a lot better than the Moto stock camera app?

Thanks

No, I did not :eek: :o It has been a while since I have rooted a phone. :o And even then i think I have only done it 2-3 times altogether. Thanks.

I must be doing something wrong, I have a couple of ideas but I'm afraid to try any of them in case I brick it. I am getting FAILED (remote failure) Model moto g7 plus XT1965-3 Build number PPW29.98-28

Okay, thanks. Going to give it a go shortly.

Hey guys, I've not installed TWRP for a long time, I've been using the same phone (Nextbit Robin) almost two years. Do I follow this guide to install this? https://www.xda-developers.com/how-to-install-twrp/ Using the instructions above?

Is there any way to flash this without OEM unlock? I also have blocked by FRP. But i am trying to unlock my pattern. I stupidly forgot. I am following this guide - https://forum.xda-developers.com/grand-quattro/general/guide-reset-pattern-lock-loosing-data-t2809099/ But i need to be able to...

I have a Samsung J5 6 SM-J510FN That is pattern locked but I cannot remember and now it locks me out for an hour. I have two text messages inside it that i cannot delete, as well as a ton of sticky note reminders. I am not rooted either. Is it possible to root and do this?

^^^ Regarding Bricking, were you able to unbrick it? If you were, was it difficult? Regarding Sailfish OS on RN4. This is excellent! I am about to pull the trigger on the Redmi Note 4 on Banggood for €120 - Purely because of this thread!! Thank you.

Hi again. Is it possible to install Sailfish on this? Especially with the publicity last week and the fact that the Russians are endorsing it, I would love to have a play around with it.

I had changed the Wi-Fi key on the router (disconnecting the tablet) but it made no difference. It still seemed to continue to update. I guess the update downloaded before it began to install? Either way - thanks. I can let it continue, and if need be downgrade. I didn't know i could downgrade...

I purchased 2 Amazon Fire tabs from this page - https://www.amazon.de/gp/product/B00ZDWLEEG/ I think they are 5th Generation. I turned on one of them and connected to Wi-Fi, a short time later it started to update. I read that if i update it, I may not be able to root it or install CM12. I...

I got it sorted. First I found this thread - http://forum.xda-developers.com/z5-compact/help/ive-bricked-z5c-t3233321 Which led me to this thread - http://forum.xda-developers.com/z5-compact/help/z5c-unbranding-stock-firmware-downloads-t3227344 And these tools...

Did you get this sorted? I can't boot into flash mode either, and I am stuck on a boot loop. Phone trying to setup and processes stopping.

I followed a guide that I probably shouldn't have, and installed zombie_b2_32.0.A.5.32.img with Z5C_OnClick_320A532. Now when I boot up the phone, I receive com.android.acore and com.android.phone have stopped. I tried to boot into recovery, but it only boots to safe mode with the same problem...

I'm more curious than anything else, but after playing with my friends Meizu MX4 Ubuntu, I searched to see if Xiaomi had done anything similar. I couldn't find any results. Would a port to the Redmi Note 2 be possible, and has anyone tried/is anyone working on a port for it? It's a beautiful...

Is this in the wrong subforum, or is nobody able to help? I am really trying, but unfortunately getting nowhere. Any reply may be helpful :)

After searching extensively, I see GPK are also used for cracked/patching game files. But seems that would require the revers of what I am looking for. As a result, there seems to be mutiple videos/links/programs for converting gpk to apk. But no good to me, I want to convert into the file...

Hope this is ok to ask, I am hitting a brick wall.. I'll try and include as much detail as possible, so apologies if it's a bit long. I am trying to convert apk to gpk - two apps in particular; MX Player and ES File Explorer I have downloaded a tool with instructions from another forum using...

I bought it. Seems to be a good deal. I got the back and cover and battery as well for €25. (I hope). I have paid for it, and it will be posted tomorrow. Apparently screen was broken, and they were going to replace it, but got an iphone instead. So it seems like there may be nothing wrong with...

What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?

Thanks again. I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening.. :(

Thanks, going to leave it charging for a little longer, and try it. If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25. EDIT Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4

Thanks. I bought a jig, and it arrived today. Have phone in charger. Do i just plug the jig in? :confused: Or do i also do the three button press? The screen is completely black, and nothing appears on it.

Well.... I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig") I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied...

Both helped a lot, thanks. I had to end up bringing the phone to a repair shop :( Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring...