Search results

I decided to flash TWRP-3.4.0.0 on my S7 Edge from TWRP itself (3.3.1.0), no rebooting I get the "Recovery is not SEAndroid Enforcing" error. First thought was ok lets get into Download and use Heimdall to flash TWRP-3.3.1.0. Phone is connected and detected but I can not print-pit nor flash...

Usually if you want to install and use Gapps when flashing a non-stock ROM you have to flash Gapps before the first boot. Thus wipe and flash LineageOS again and before booting install Gapps. This shouldn't be the case with Magisk but personally I usually flash it before booting too.

Upgraded from LineageOS 14 to this ROM works a treat, thanks for the ongoing maintenance of this ROM.

Just seen a new build dated 2020-01-27, no changeling there though.

Where abouts did you get the APK for this?

Ok, sorted out OpenGapps by rebooting to TWRP, clearing dalvik cache and flashing nano and Magisk again. Play store works and apps retored from backup. Unfortunately I could only get MatLog to request root access, Titanium Backup and AdAway had their "Request rejected" when asking for root. I...

First and foremost, thanks for your work on TWRP and LineageOS for the G7 Plus Jleeblanch, it tipped me in favour of purchasing this phone. This is probably a dumb question but after I "Reboot and let ROM boot once (It is necessary to reboot between ROM flash and GApps/Addon flash due to...

Turns out secure booting had somehow been disabled, how I don't know as I didn't do it. This can be enabled under.. Settings > Security > Pattern > Screen Lock

I'm running the LineageOS 7.1.2 (8th February 2019) and yesterday I saw there was an upgrade to TWRP-3.3.0-0 so I downloaded the image for S7 Edge (hero2lte) and rebooted to the existing TWRP custom recovery (3.2.3-0). On entering TWRP I was not asked to unlock my encrypted device which was...

I was coming from the S4 where I'd used Heimdall so just went with the tools I knew and had used in the past. Shame its a bit of a pain in the arse to flash Stock with it but should be able to use someone's M$-Win machine and Odin to do that.

I use Gentoo, under Gentoo install hiemdall with... emerge -av heimdall Reboot your phone into Download mode (Power off, then hold down Vol Down & Power to start, then Vol Up to continue). Plug phone into computer via USB. At the command line check the phone is detected with... $ heimdall...

Ok, thanks for the advice. I used heimdall on the S7 Edge to flash TWRP so thought it was still a valid/useful tool. Shame as its a bit of a pain having to find a M$-Win computer to use just for Odin but its fairly infrequent that I'll need it (I hope!).

Hi, I've a phone I'm returning to seller that I've flashed with LineageOS and I wish to flash stock ROM before returning it. I've obtained a UK BTU ROM from samsung-firmware.org and read through the guide at OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F but since...

Hi, Thanks for the input, I'm wary of clearing the cache for Android Pay as I'm unsure whether that is where card details are kept/stored, if so wiping may remove them. I can open the Android Pay app ok. My banking app (Nationwide) works fine, as does PayPal. Android Pay is by default hidden...

Hi, I've an S7 Edge (GM-935F) that I've flashed with LineageOS and rooted with Magisk (currently 15.3, waiting for 15.4 to go stable). Since late December I was able to use Android Pay despite Safety Net checks never passing from Magisk Manager. Two weeks ago this stopped and when trying to...

Hi, Thanks for the suggestion, I have already tried booting with the charger plugged in (both USB from cable and a micro-USB charger from the mains). I sent the phone back to LG last year and had the battery replaced under warranty then (just checked and last email communication was...

Do you happen to have details of which modem radio you used? Not much for me to go on otherwise. I've tried the official stock ROM from Google as theminikiller suggested and would expect that to have the correct modem radio included within it (which for 5.1.1 was the file...

Thanks for your suggestions and help, appreciated.

Left it over night and still stuck on the boot animation. Any more suggestions/ideas of things to try would be very welcome, but its looking like this phone has given up the ghost which is a bit of a shame as it would have made a nice backup.

Thanks for the confirmation/sanity check. # fastboot devices -l 002fff0a560d4e29 fastboot usb:2-2 occam-lmy48t # fastboot flash bootloader bootloader-mako-makoz30f.img sending 'bootloader' (2264 KB)... OKAY [ 0.080s] writing 'bootloader'... OKAY [ 0.332s] finished. total time: 0.413s...

Now its become a chicken and egg situation, people aren't providing enough information for him to be able to do anything about and he therefore can't do anything about it! Not sure how you fail to recognise this, but for all those complaining of problems and wishing to do something useful to...

Saying something isn't working is not reporting a bug since it is absolutely essential to have the system information and errors that the system reports before it is possible to diagnose the problem. Envisage going to the doctors and saying "I'm not well" and expecting to get a diagnosis and...

This is true, but simply posting "X/Y/Z doesn't work" is an insufficient level of detail for developers to use to resolve the issue(s). At an absolute base level, the exact model of phone is required. Then versions of the ROM, kernel and the specific software that is causing problems. Log...

I'll give it a go, but it was on stock when the problem first arose and wiping cache/dalvik/data didn't help. I'm slightly confused as to which to download though. There are only "occam" for Nexus 4 listed, so I guess its one of those (likely 5.1.1 (LMY48T) as its the most recent). But for...

Cataclysm includes Gapps so I've had a go at flashing MinimalOS (5.1.1) which doesn't (after wiping Cache, Data and Dalvik Cache of course). Still hangs on boot animation and I left it half an hour just to make sure. Tried with XenonHD without Gapps and it too just hangs at the boot animation...

After updates around 5.1.* my phone started playing up and was taking longer and longer to boot, eventually getting stuck with the four coloured dots swirling around. Time to root the phone which I duly achieved with chainfires CF-Auto-Root via fastboot (since the phone wouldn't boot up/start)...

I know Xposed issues aren't for the thread but rather than an issue I thought I'd report that whilst the Framework for Xposed Installer (v2.6.1) reports... I've found that the following all seem to work, they don't complain about not being able to find Xposed Framework and using them works...

This is working great for me, thank you very much to everyone for all your hard work, been waiting for this 5.1.* GPE ROM to come out. Great that Stagefright is patched too.

Nope, just white text and if I enter the Framework section no red text there either. I'm considering backing up and flashing the ROM again to see if that sorts things.

I've started experiencing problems with Amplify, when I start its like the first time its been run so it goes through the checks. It gets to checking for root access and then complains that the module isn't enable and offers to help Fix It which takes me to Xposed....where the Amplify module is...

Great thanks for the confirmation I'll keep an eye out for updates. Sent from my GT-I9505G using Tapatalk

Is Smart IR Remote the only IR remote that people have found works? I previously had IR Remote Control working under 4.4.2 and have whilst searching around just come across ASmart Remote IR which looks to be about as comprehensive as Smart IR Remote (if it worked). The 2014-06-10 update says...

Brilliant, thank you very much, I had't found that option and it now works perfectly/as expected.

Toggling network status using QuickSettings tiles... I've encountered some strange behaviour with the QuickSettings management under Statusbar Tweaks. If I go the the system.... Settings > More... > Mobile Network Settings > Preferred Network Type > Select LTE/GSM/WCDMA ...so that I can...

Consider installing the Xposed Framework and seeing if there is a Module for doing this.

Plug your phone in then turn it off?

This has kind of resolved itself, I've done nothing to the server on which mediatomb is running nor to my router. I have however had a few updates to LocalCast and as a consequence can now see mediatomb, the DLNA from my NAS and my wife's M$-Win PC from LocalCast. The unfortunate catch is that...

And what are the file types you are trying to cast?

Thanks for the reply, I'll see if I can check the router for that (quick look just now and I couldn't find any setting for that, and its only briefly mentioned in the manual as being an aspect of the firewall service in the introduction on pg21 and nowhere else). I've done some more digging...

Great work on a simple and functional application. I've encountered problems connecting to my uPnP server. I'm using Mediatomb and have it set-up to run on port 41952. I've enabled uPnP on my router (a Zyxel P-2812HNU-F1). Mediatomb starts up okay and binds to port 41952... 2014-03-21...

Its unlikely to have a clear answer, as what is "best" depends on what you want from your device/OS.

Not all feeds appear in the reading list Really like the nice clean presentation of Minimal Reader Pro. Unfortunately I find it only lists 25 of the 110 RSS feeds I follow via Google Reader. I've tried refreshing the list several times (start Minimal Reader, goto Browse then hit the 'Refresh'...

Looks like Philips Fidelio is an option.

This cable offers one solution, providing an adapter to iFern docking speakers. I'd like a microUSB speaker dock though.

Quick work, well done.

For reference Vol Up + Home + Power is used to start the phone into Manual Mode, not turn it off. Vol Down + Home + Power is used to start the phone into Update Mode.

Thanks for this guide, thought I'd bricked my phone (Samsung Galaxy S2) when it got stuck on the boot screen trying to flash with stock 4.0.3 ROM using Heimdall 1.3.2. Recovered now :)

Right, sussed out how to use the GUI Frontend thanks to this post. Pretty sure using the above command would have achieved the same thing. Having gone with v4.2 I can now say that it includes ClockworkMod (presumably custom as detailed in Chainfire's original thread) and a Superuse app. Hope...

Hi, Trying to find guidance on rooting my i9100 S II, but I use GNU/Linux (Gentoo) so Odin isn't an option. I'd like to go with CF-Root and having read the first page my kernel version is.. 2.6.35.7-I9100XWKF3-CL276555 [email protected] #2 ...so I'm pretty sure the only CF-Root available to me is...