Search results

i wonder if ubuntu touch or chromium os could be launched on the lumia 520 !

same thing happened to me just execute it like in the first command and wait till it ttimesout and go to the next phase of flashing or you can disconnect your phone once till it goes to next phase then connect it again then disconnect it ill i says " waiting for device " then connect it again...

yeah that happened to me and i couldnt flash the boot.img file so i just reexecuted the uefilk file and it worked

sad to hear that so i think it'll take sometime wish it works anyway :) thanks for you great work

pressing vol- / power gets you to the fastboot mode in that case you an try reflashing the recovery with the command "fastboot flash recovery yourfile.img " i suppose :/ but vol+/power should get you stright away to the recovery you just need to wait a bit like about 5-10 seconds and you try...

can anyone with some knowledge do us a favour and try this please?? https://community.nxp.com/docs/DOC-93603 android kitkat is working smooth on my 520 but i need to be connected sometimes with wifi :/

does it vibrate? try turning it on while pressing vol+ / power button you should be in the teamwin recovery

you need to run that urfilk file again and connect your phone as it'll flash the modem file and the recovery file so you can use it to install custom firmwares

did you back up your phone??

guys !! ive been checking online and i found that the lumia 520 has a wifi chip called "Module WCN3660" in here https://stellatech.com/nokia-lumia-520-wifi-ic-module-wcn3660-cs-79bwlnsp-wlan-bt-fm,a,en,815053.html checking again for android drivers i found thers already some drivers in a...

can i ask about the sony z ultra? :/ maaan as i noticed the lumia 520 is using the sony c1905 boot files so maybe the lumia 1520 can use the sony Z ultra boot files as they have the same CPU? :/ or the security things are different? ---------- Post added at 11:26 PM ---------- Previous post...

maaaan thank you very much *_* try and let me test i revived my other dead lumia :DD

maaan porting drivers isnt an easy thing to do :/ https://www.linkedin.com/pulse/how-port-backport-drivers-android-bhanu-prakash-singh does anyone have an easier way?? :/

i know that advance box can repair it with its jtag interface as some of these samsung EMMc's gets write protected while reflashing so idk and its danger to change the EMMC chip with another one because the cpu is sitting just under the EMMC i would suggest a jtag but i dont have enough...

i think if you have a samsung EMMC you'll need to Jtag it as much as i learned :/ or maybe you are keeping the EMMC clock shorted when flashing it

so thor 2 is reporting that emmc is not working ! did you disassemble your phone ? ---------- Post added at 01:58 AM ---------- Previous post was at 01:44 AM ---------- if you did nothing to your phone and you got that error its propably true that your EMMC isnt working which might be a...

if you tried to reflash the MBN and HEX files and the flasher made en error that the EMMC is not working thats because even your EMMC is screwed up or because you Left the R3902 And The GND connected while flashing As You Need Only To Let them Connected For the first Seconds So That Your Pc...

flashed using Lumiafirmware emergency files with no succes as its been only vibrating ive flashed the FAST8930_FAME_ROW.hex and the RM914_msimage_v1.0.mbn files from the lumiafirmware.com and now its always in the QHdload mode but it still needs the battery to be detected and thers no vibration...

my pc detects my phone as HID\VID_05C6&PID_F006&REV_0000 HID\VID_05C6&PID_F006 HID_DEVICE_UP:FFA0_U:00A5 HID_DEVICE and it automatically installs it as HID device i suppose its and ADB interface?? as i couldnt find the right driver does anyone have any idea? thank you

when it says " eMMC is not working!! " thats because you kept the R3902 connected to the GND so the memory isnt working u need to use it just for few seconds till the pc detectes it

now i tried the wpinternals it sends the unlocked bootloader and everything then nothing happens and i tried to connect some other resistors then it reads it like HID\VID_05C6&PID_F006&REV_0000 HID\VID_05C6&PID_F006 HID_DEVICE_UP:FFA0_U:00A5 HID_DEVICE and i couldnt find the right adb driver...

trashmaster76 that tree is made by thinhx2 so propably its the one been used already

sooory for late reply sir but i think i found it i made a connection between the R3902 resistor and the GND and its been detected as QH-Dload 9008 as in the attachements thank you for your help but ...:/ do you have any idea what should i do to make the wifi work? as long as ive been told the...

feherneoh well sir i appreciate your time then :) and ill ask thinhx2 about it ---------- Post added at 12:02 PM ---------- Previous post was at 12:00 PM ---------- thinhx2 sir can you explain further please :/ or maybe giving me a link to some tutorial as i cant find anything on google by...

i thought the modem package has only things that have a relation with networking and such a things -_- .. so do you think i can make it go back to qh-dload mode using some jtag tricks?? i mean without advance box as i dnt have dat !!! :/ :/

suure but it says file is too large so heres the link http://qc1.androidfilehost.com/dl/NEMcaDWkjPKS-PQxiM_yGA/1485005447/23578570567716948/Modempackage_0514_Find7a_Entropy.zip ---------- Post added at 07:30 PM ---------- Previous post was at 07:27 PM ---------- since it vibrates i suppose its...

goone with the wind :3 so as much as i learned the problem is withing the basband files so i tried to flash this file Modempackage_0514_Find7a_Entropy.zip using twrp at first it said error 7 then i edited the script file and it flash normally afterwards all what i have is a vibration and a...

so can we have some hints can we have some ideas about how to get the bluetooth and wifi and cellular working so maybe we can do some researches and try out things i suppose the problem resides in the modem.img file and the drivers files?!! thank you

well that was reallt helpfull thread but whenever i try to reflash my bootloader i got stuck on sending asci command : NOKD then it quits do you think that has a relation that my bootloader is locked? because i had a locked bootloader when i flashed a wrong firmware to my phone thank you

As Long as i know some Xiaomi Devices have a qualcomm snapdragon Cpu's wich means they got stuck at the same problem like some Nokia Lumia's and other phones i found that the solution was to reflash the bootloader to get out of the Emergency mode and Go to normal boot mode so flash tools will...