Search results

Just an update from me on this issue(?) It was a bad sim card. Got it replaced and everything is working normally now.

Regarding the dual sim phones and not being able to receive calls. I have this problem also, I was able to get the sim registered on my network, Telstra Australia, once by using my work phone to activate the sim on the network. But as soon as I put it back into the HTC U11 and try and call it I...

I did both. Disable in app then using app called Device Control I have both disabled and uninstalled it.

I use the htc headphones every day and I do not have any of the problems you have. I have disabled audioFX though.

Same for me too. Also my phone is being shown as a HTC_U-3u and not HTC_u11. Not sure if that makes a difference.

I can confirm it working when asleep. You may have to turn down the Sqeeze Force slider as it requires a real strong squeeze to activate at default settings.

Quote: Originally Posted by MadMungo Just finished streaming the Australia v India one day game here. Started 93% battery finished with 22% battery after 9 hours screen on time. I also get 2 and a bit days of average usage of a charge on both HMP and EAS. This was with the Jan 15th rom, so...

Just finished streaming the Australia v India one day game here. Started 93% battery finished with 22% battery after 9 hours screen on time. I also get 2 and a bit days of average usage of a charge on both HMP and EAS.

Finaly someone else experiencing what I have been experiencing.

Yep dirty flashed over the top of the Jan 04 build after nandroid backup. All good everything seems to work ok inc dt2w and edge gestures, still no network activity indicator though.

Yes that is correct. Perhaps I need to explain better. When I am connected to a bluetooth device, be it either speakers, car radio, headphones etc, the call volume is very low and the phone call volume and bluetooth device volume need to be at max for a decent level. This did not happen on...

I am using this gcam port from the rr8.1 thread https://www.celsoazevedo.com/files/android/google-camera/f/MGC_5.3.015_MI8_V1a.apk . Everything is working fine. I noticed under sounds that when I adjust the call volume i get played the alarm sound and it is very low sounding. When it is at max...

Quick Charging is working here. Using the HTC charger. No idea if it works with others. Also Network monitor not showing here either.

Bit of a scare after install on dual sim phone, sim card recognised but no connection. After about a minute had cell reception.

Can also confirm it is working no problems after a dirty flash. On dual sim.

Same thing happens. My log is after having installed & setup the phone. Dose not matter when Magisk is installed it will still boot back to recovery.

Just installed the dual sim test version with open-gapps-pico and everything I use works ok. I do not have magisk installed, as installing it during setup causes it to boot back to recovery as soon as it gets to the setup screen, didn't get a log but can nandroid this working install and try a...

Well I am back from testing on dual sim device. Unfortunately I experianced the same as miffymiffy, It boots to setup screen but instantly shuts down and reboots into recovery. Happens after a clean install and when installing over Slim 9 Alpha 6. Tried it with the single and dual sim versions

Will try this in a day or two. currently running Slim 9.0 Alpha 6 on dual sim phone. Only problem is low call volume using bluetooth devices.

Anyone else experience very low call volume when using any Bluetooth device to make calls? As an example, I have the call volume up flat out and it is only half as loud as music being played through the same bluetooth device. Using the phone, the call volume is loud as normal. I am on Alpha 6.

Same here. Clean flash, dirty flash makes no difference.

Same here. After reboot it goes back to adjusting the media volume.

I have the same problem with the volume buttons always adjusting media instead of ring volume. This never happened on Slim8, it was always correct.

Htc camera is working for me, as well as the htc flashlight.

Yes I did. Still no volte.

I have the same problem. No calls over lte and indian dual sim with magisk. Will try with a fresh install and no magisk to see what happens.

Russ, Sorry to here you are having troubles. I am just a user, no technical knowledge but will try to help. As far as I can tell from reading various posts on this, you will need to flash to the latest stock RUU, https://androidfilehost.com/?fid=745425885120762674 . Then you can flash the OTA...

Thats what I am doing now. Am just curious if it is possible.

Hey, I am in Australia and bought the phone from overseas vendor as it was cheaper and I needed a dual sim phone so I didn't have to carry 2 phones around. I now have a different job and don't have a need for dual sims I was wondering if it is possible to set the phone up as a single sim by...

is there an updated twrp for the chinese partition layout anywhere.

Well I had time to give it a go and was successful. I am now on the (HTC__001) EMEA dual sim firmware from the (HTC__060) Indian dual sim firmware. If anyone else wants to give it a go it was real simple, I just followed the following steps 1. Install sunshine for s-off to change the CID. 1a...

I have been doing a lot of reading up on changing the branding/region of the U11 and think I have the steps worked out. Would just like someone who has done this to comment on if it seems right to them. So Going from DUGL India to DUGL EMEA I would 1. Install sunshine for s-off so I can change...

I have been trying to get the Google Dialer to work on the dual sim phone stock android, magisk root and tried both of the modules with no luck. If I disable the htc incallui then nothing happens when I try to make or accept a call. If I disable the htc Phone app then when I go to make a call...

I can see maxwens reply now. You have Xposed installed, uninstall Xposed do a fresh rom install and then test it without Xposed. If it works ok it is an Xposed problem so ask them whats wrong. I have no problems with any of the built in app including Snapdragon camera, but I like to keep an as...

I have been using the off screen gestures ok for both omni 5.1.x & 6.0.x. Every now and then dbl tap 2 wake takes a few tries before waking device but that is it.

Yes it dose, which is why I am sticking to the latest lollipop rom. Doesn't matter which MarshMallow rom I use all of them suffer from random reboots because OPPO have not updated the baseband for the x9007, x9077 & x9070 phones and it dose not sound like they are going to update them any time...

jejecule For the meantime you may want to put a warning on the first post that ALL Chinese find 7's, x9007 - x9077 - x9070, will require re-flashing the OLD 3.0 baseband otherwise there will be no signal. This is due to a completely different radio used to the one in the international versions.

I'm in Australia with a x9007 ( Find 7(a) Lite). Bought the phone before they announced the international versions. Oppo know about the issues, but I am not holding my breath waiting for them to fix it.

Anyone tried this on a Chinese Find 7a yet with the new firmware?? Asking because I get no signal after flashing the firmware update. I have tried ALL CM based MM roms dated after 20160104 with the same no signal.

To ALL No signal after updating to 0107 with new modem ONLY happens on the Chinese Find 7/7a phones (x9007 & x9077). Oppo have acknowledged this in there Project Spectrum V1.0 Beta forum thread as it uses a different modem to the international versions (x9006 & x9076). Unfortunately it looks...

jejecule Since flashing new firmware my phone, chinese x9007, no longer recognizes the sim card. When using Spectrum 1.0 beta I needed to flash a patch to get the sim card to be recognized. Here is the link to the Spectrum 1.0 beta modified firmware by WuXianLin...

Selinux switch is there for me. I dirty flashed then clean flashed once I knew the status bar option was working ok. Also I remember having a gapps that alowed me to restore my apps. It was possibly one of the open gapps above the micro & nano packs. This was with MM6.0 and the first 6.0.1 builds.

UnknownX55 & kuja Can I ask if you followed the flash instructions exactly as per jejecule's instructions as the first time I clean flashed without SuperSU 2.62 and got the encryption failed message. When I did another clean flash with SuperSU 2.62-3 I did not get the error and everything has...

I can confirm following the above has worked fine on my Find 7a with and without LVM. Now to see if my random chrome reboots happen again. jejecule Just so you know the crdroid-6.0.1-20151219-find7.zip file link from post #1375 has the same md5 as the one in post #1380.

jejecule Can we get an option to seperate notification & ringtone volume levels. I am on the latest build and haven't been able to find that option/setting. Thanks.

Just had 3 random reboots in the last 20 minutes. I think it is doing a soft reboot as the phone starts at the black OPPO screen without the powered by android bit then goes straight to the crDroid boot animation. If I am downloading something when it reboots, when the phone has restarted after...

jejecule I was getting the SD card corrupt for my external SD card with the builds before Dec 8th. At first it would find the card and set it up as external storage but after a while, varied from two reboots up to 20+ reboots, it would suddenly come up saying card is corrupted and not be able...

Leo, I get the same thing on my Find7a with nameless + coldbird unification. I have noticed that since 2.8.6.0 the recovery file size has come from 14mb to 10mb In size & seeing as Entropy512 HATES colbird unification I suspect he dropped it and conveniently forgot to mention it. I am now using...

I too have problems with the wifi password being forgotten after reboot running DU 8.1 & arter97 4.0 beta 2 on GT-I9300. Also just installed arter97 4.0 beta 3 and the phone hangs at boot, dose not get past screen with Samsung Galaxy SIII GT-I9300. Going to try arter97 4.0 beta 1 and see if all...

Dose this recovery support the unified memory layout of coldbird? Or do I still need to use his modified 2.7.1.0v2 recovery.