Search results

For the ones still bumping into this thread. New firmware and APP for both the Watch and the MiniGPS tracker now allow to have APN settings applied directly from the APP. The new firmware has enabled the device to receive a SMS with the configuration settings. The SMS will contain the IMEI...

This is the FW13 update ROM. You should be able to flash and also compare differences. For my device, I'm now quite sure I messed up with something else. Today I'm in China and have both Unicom and CMobile sim cards, correctly connecting to the 46000 and 46001 networks, fully capable of making...

I can make the call using the ATD command, in HK, China Unicom does not support 2G, and the only option is China Mobile, so I guess connectivity issues come from Proxy settings. Since the device does appears to be connected. The sim card does not have any pin settings. and I use the same...

Thanks, So far the device reports to have the current network as active, so it is capable of seeing the MCCNC, it can select it, so it is active, but it has not been able to become registered. The weird part is that both devices, the one with connectivity, and the one without both show the same...

The devices I activated in china have been working perfectly. Both the 2 devices I'm trying to activate directly in HK I have not been able to. Since the MCC 45412 is already there on the ROM if I modify, it is not able to correctly read the parameters and connect, there is one lock that I'm...

Time to sum up progress. Activation option #1 Have your Chinese Seller activate the device using a Chinese Sim card before shipping, and this should ensure full communication in China, Hong Kong, Taiwan. (460.466.454) and possibly in the following places: 208 - France, 404 - India, 405 -...

Where you got the source code from? Source_code_of_6261\code_6261A_L1\custom\comm on

These are the operators that i have tried in HK. China Mobile Name: CMHK APN: cmhk MCC = 454 MNC = 12 MMSC = http://mms.hk.chinamobile.com/mms 454 07 Unicom 454 11 Hongkong Telecom 454 00 CSL 454 16 PCCW 454 06 Smartone-Vodafone Attached is the DAT file.

You can try TMobile or Ting. Ting has special packages ideal for wearables. They will have 2 more years of support.

If you keep looking in the firmware, just bellow the MCC codes you will actually find the APN settings. Keep searching to the bottom of the file and you will find the W. A. P... U. N.I.C.O.M... C.H.I.N.A...M.O.B.I.L.E part of the string, that means that beside replacing your MMC on the top of...

Today I'm in China so I will not be able to upload the files to a G drive location, tomorrow I should be able to upload them. I have bought a new device today (this time the mini GPS, 6261 based) and done a backup before the network registration and after. I can confirm that all changes...

So I first activated my device in China with a Xiaomi Sim card. Then traveled back to Hk, and tried with Hk local China unicom, China Mobile and three Sim cards. None worked. Then I tried the at command for setting up the Apn settings on the device. The commands would not give an OK...

Connecting outside of china Well, today I got connection from outside of China. I played with several of the At commands that were supposed to actually configure the settings, and all seemed to make the terminal hang. But after rebooting the phone it got a connection. Now it's fully...

Easier said than done, but still I got some progress today. After reviewing the ROM I was able to find several At commands to control the device. I'm missing the sintaxis on many of them, but I was able to directly perform and receive a call from the Hyper terminal. I named the xml file...

International Apn settings The answer from the Chinese manufacturer is an xml file that we should add to the device ROM. It is not so different to the following thread https://forum.xda-developers.com/showthread.php?t=2387346 I have my bunny watch 2, that I have paired during a visit to Sz...